Dish Network 176842 Manuale utente
Remote Control
User Guide
Remote Control
User Guide
C-1
Accessing the System Wizard
Refer to page 12 for information
on System Wizard
Press MENU, select
Settings and then
System Wizard.
OR
C-2
Separate the
key from the
remote by
inserting your
thumbnail or a
coin in the
crease.
Remove the
key by
grasping at
the bottom.
Insert the
key face up
and slide
into place.
Pull the
remote
battery
cover off.
Confirm
your
remote has
the green
number 1
key
installed.
Note: If you will be using the green TV1 key that comes
already installed in your remote, skip this step and
proceed with the next step (Insert the Batteries).
Verify the Key
1
Insert the Batteries
2
1
4
2
3
1Replace
the
remote
battery
cover.
Insert 4 AAA
batteries,
making sure
to match the
plus (+) ends
with the plus
markings on
the battery
case.
2
Quick Setup
C-3
Quick Setup
Confirm that your remote operates your
receiver by pressing remote buttons.
If this is not working, repeat step 5.
If the remote is still not linked to your
ViP922 receiver, see page 10 in this guide.
Making the Remote Work
With Your Receiver
3
6
Turn your ViP922 receiver
and TV on, and select
SYSTEM INFO on the
receiver front panel.
Confirm that you
see the System
Information screen. Press and release SAT on
your remote. After a few
seconds, you will hear a tone,
and the remote will be listed
on the screen.
3
2
1
5
4
Verify this key is
installed,
and continue
with step 2.
Verify the
remote antenna
is installed on
the back of
the receiver.
REMOTE
ANTENNA
C-4
Quick Setup
Select TV Code and then follow the on-screen
instructions to enter your TV’s device code.
Set Up the Remote to
Control Your TV
1 2
3
4
To set up the remote control to operate a TV,
you can select a Device Code (see
instructions on page 3).
Your ViP922 DVR has a large database of
Device Codes for other equipment.
Press the POWER button to turn the TV on and
try other buttons to make sure the code works.
If you want to try another code, start over from
step 3.
Press MENU, select
Settings and then
Remote Control.
Turn your TV on.
4
Quick Setup/Operation
C-5
Placing Your Remote
in Limited Mode
Use the arrow button
to highlight Enabled and then select it.
2
3
Highlight and select Save.
1
Select the Limited Mode
option.
To take the remote out of Limited Mode, highlight
Disabled instead of Enabled in step 3.
Limited Mode locks out all the TV mode operations except
for TV power, Mute, and Volume. This prevents you from
accidentally tuning away from satellite programming.
Press MENU, select Settings
and then Remote Control.
Receiver Power & TV Power
Top button turns the receiver on/off,
Bottom button turns the TV on/off
Programming required (see C-4)
Input
Press once
for Input
Operation
Remote Operation
SAT Mode
SAT
Control TV volume
Programming required (see C-4)
Volume & Mute Buttons
To use the features described in this section, make
sure you are in SAT mode by pressing the SAT Mode button.
Note: Some features may not be available depending on your receiver model.
Page Buttons
Page up/down in
menus and Guide
Program Guide
Display current and
future satellite
program listings
Arrows/Select
Buttons
Channel up/down,
navigate through
menus and select
a desired option
Browse
See what is on other
channels while
watching TV
View Satellite
Programming
Exit out of any menu/
guide and go back to
viewing live TV
Number Buttons
Enter a channel
number to change
to that channel
System Wizard
Press and hold
to sync remote
and receiver data
Dish
Explore DISH On
Demand options
Receiver Menu
Access receiver
features and settings
Themes
Search for programs
using Themes
Recall
Go back to last
channel viewed
Info
Get info on programs
Search
Search for a program
Jump
Move cursor to
another screen area
Digital Video
Recorder (DVR)
Buttons
Pause live TV and
play or record
programming
Picture-In-Picture
(PIP) Buttons
Watch two separate
programs at once
(in Solo PIP Mode)
Format
Format the picture
to the desired width
to match the program
you are viewing
C-6
Press this
button for
SAT Mode
C-8
Operation
Remote Operation
TV Mode
To use the features described in this section, make
sure you are in TV mode by pressing the TV Mode button.
Remote programming is required. See C-4 for instructions.
Note: If you have programmed the remote in Limited Mode (C-5),
only the TV Power, Mute and Volume buttons will control your TV.
TVTV
Note: Remote operation is different on DISH Network TVs.
See your DISH Network TV User's Guide for proper operation.
Press this
button for
TV Mode
Up/Down
Arrow Buttons
Channel up/down
on TV
Number Buttons
Enter a desired
channel number
on TV
TV Menu
Access menu
features available
on some TVs
Input
Switch between
TV inputs
Mute
Turn TV volume
on or off
Recall
Go back to last
TV channel viewed
Picture-In-Picture
(PIP) Buttons
Display PIP features
on some TVs with
PIP capabilities
C-7
Volume
Control TV
volume
Receiver Power
& TV Power
Turn the TV on/off
Programming required
(see C-4)
Programming required
(see C-4)
C-8
Operation
Remote Operation
DVD Mode
DVD
To use the features described in this section, make
sure you are in DVD mode by pressing the DVD Mode button.
You can use this mode to operate your VCR instead of a disc player.
Remote programming is required. See page 2 for instructions.
Press this
button for
DVD Mode
Input
Switch VCR between
its TV & VCR mode
DVD/VCR Power
& TV Power
Top button turns the
DVD player/VCR
power on and off,
Bottom button turns
the TV on and off
Number Buttons
Enter a channel
number for VCR or
a chapter title on
a DVD
Record
Record on a
videotape
Back
Rewind a videotape
or reverse a DVD
Stop
Stop playing a DVD,
stop playing or
recording a
videotape
Up/Down
Arrow Buttons
Channel up/down
on VCR
Pause
Pause a videotape
or DVD
FWD
Forward a videotape
or DVD
Play
Play a videotape
or DVD
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Dish Network Telecomando
Dish Network
Dish Network Platinum Remote Control Manuale utente
Dish Network
Dish Network 3.1 Manuale utente
Dish Network
Dish Network Digital PVR Manuale utente
Dish Network
Dish Network EZ Manuale utente
Dish Network
Dish Network 11 Scheda tecnica
Dish Network
Dish Network 167820 Manuale utente
Dish Network
Dish Network 52.0 Manuale utente
Dish Network
Dish Network Duo ViP 222 Manuale utente
Dish Network
Dish Network 54.0 Manuale utente
Dish Network
Dish Network Remote Control Manuale utente
Dish Network
Dish Network Solo 301 Istruzioni utente
Dish Network
Dish Network 54.0 Manuale utente
Dish Network
Dish Network 311k Manuale utente
Dish Network
Dish Network digital remote control Manuale utente
Dish Network
Dish Network BASIC REMOTE Manuale utente
Dish Network
Dish Network Platinum Plus 121150 Manuale utente
Dish Network
Dish Network 135331 Manuale utente
Dish Network
Dish Network EZ Manuale utente
Dish Network
Dish Network Hopper with Sling Manuale utente
Dish Network
Dish Network 20.1 Manuale utente
