DoCash 2035 Manuale utente
Heat Sealing Machine
Безвакуумный упаковщик банкнот
DoCash 2035
User Manual
Руководство по эксплуатации
РУССКИЙ
ENGLISH
www.docash.de
Tables of contents
1. Safety precautions 2
2. Purpose of device 3
3. Specification 4
4. Design of device 5
5. Operation procedure 6
6. Maintenance 8
7. Warranty 10
8. Transportation and storage 11
9. Complete Set 11
6.1 Replacement of assembly units 9
6.1.1 Replacement of the heater 9
6.1.2 Replacement of the Teflon cloth 10
10. Sealer assembly 12
This User manual contains block with Warranty Coupon and terms
of warrantee providing.
Keep this User manual during the whole device life time.
1
1. Safety Precautions
DoCash 2035 heat sealer s operate from 220V power supply cir cuit.
User is required to comply with safety precautions while operating any
apparatus of this type:
Replace heating elements and effect other service activities only after
the power supply cable is disconnected from the outlet
If the device has been transported and stored under low temperature
conditions, it is required to maintain the device at least two hours under
indoor temperature before switching it on.
To avoid break-off or damage of the cable, it is required to hold on the
power supply plug while inserting it in the socket and pulling out. Also
avoid such actions when your hands are wet - it may cause in electric
shock.
Avoid using the device with the damaged power supply cable.
Note
Please read this manual carefully before you start to operate the heat
sealer machine.
Note
Voltage over 42V is potentially dangerous for the operator
2
Thank you for choosing DoCash cash handling equipment.
DoCash is a wide range of special cash handling equipment for retail
trade and financial organizations. DoCash is a brand for simple and relia-
ble banknote and coin counters, universal and automatic currency detec-
tors, vacuum packaging machines, etc. You will find any further infor-
mation at www.docash.de.
2. Purpose of device
DoCash 2035 heat sealers are designed for sealing polyethylene and
PVC bags with banknotes and securities.
This Manual reflects relevant information at the time of publication and
may not include later alterations.
3 www.docash.de
3. Specification
Power consumption when seal-
ing:
850 W
Voltage 220V/50Hz
110V/60Hz
Seal length: 350 mm
Seal width: 10 mm
Heating time: 0 ~ 0.25 sec
Net weight: 22 kg
Overall dimensions (HxWxD): 800 х540 x 250 mm
Max seal thickness: 0.2 mm
Sealing time: See the light goes off
4
4. Design of device
Fig 1.
5
Transformer
Control pan-
el
Heater holder
Base
Pedal
Pulling
pole and
Pulling
hook
Working
table
Pressing
arms
Supporting stand
Heat
Power indicatorTimer
Fuse
Power switch
Fig.2. Control Panel
www.docash.de
5. Operation Procedure
1. Connect the machine to 220V power source according to the indication
mentioned in specifications.
Fig. 3
2. Switch on the power, the red light is on.
Fig. 4. Diagram of the control panel
for impulse sealer
3. Adjust the sealing time ac-
cording to the materials and
the thickness of the bags to
be sealed. The sealing time
should be adjusted to around
grade 1 before sealing (Fig.
3). Put the opening of the bag
into between the heat sealers,
step down the pedal (Fig. 4)
and the yellow lamp lights.
Take out the sealed bag 1~2
sec after the yellow lamp is
off.
6
If the seal is not tight enough, increase the sealing time. Check
that there are no wrinkles or creases on the sealed bag. If there
are no faults, seal bags at this sealing time and temperature.
PLEASE NOTE: The cooling time should not be too short, oth-
erwise wrinkles can appear on the seal. The longer the sealing
time is, the longer is the cooling time.
4. Never try to seal without bags. Select the sealing temperature only
experimentally. Otherwise, the Teflon cloth might be burned. If some
plastics unfortunately adheres to the Teflon cloth because of careless-
ness ,never try to scrape it off with something hard. In this case, reduce
the sealing time and seal the bag once again. Release the pedal a little
after the yellow lamp is off. It is very important to carefully remove the
bag from the Teflon cloth. The remains of the polyethylene will be
cleared from the Teflon cloth with the bag.
5. Switch off the power and unplug the machine when you finish the op-
eration.
Note:
Sealing time depends on the thickness of plastic bags, and can be determined
experimentally. Otherwise, the Teflon cloth might be damaged.
Note:
You do not have to hold foot pedal pressed. Sealing and heating parameters
are set by control knobs on the control panel (see item 3) and do not depend
on foot pedal pressing time.
7 www.docash.de
6. Maintenance
1. Always keep the sealing surface clean. Otherwise the remains in the
sealing surface will shorten the life of the heater and the life of the Teflon
cloth. Never try to clean the sealing surface with wet cloth.
2. To avoid burns, never touch the heating block with hand.
3. Check the rubber in the upper pressing arm at regular intervals. After a
long period of use, it can wear and should be changed. The rubber must be
flat and straight.
4. Add lubricating oil into the moving parts at regular intervals.
5. Always check the condition of the Teflon cloth when replacing the heat-
ing element.
6. Do not disassemble the machine if there is no urgent need in it.
8
Note:
Be sure to turn off the power before starting maintenance works.
Note:
This machine requires proper maintenance.
In case of failure, please contact technical service.
Indice
Lingue:
Altri manuali DoCash Elettrodomestico da cucina
