Dwyer Instruments DPMF Series Manuale utente

The Model DPMF Flush Mount LCD Digital Panel Meter offers high

performance and low cost in a compact package. This meter is designed

with a 3-1/2 digit, high contrast CD display. The unit is powered by a 4

to 20 mA DC control loop input. Standard features include adjustable

span and zero, and field-selectable decimal point position. The flat pack

of the panel meter allows for the instrument to be mounted to any flat

surface.

I STALLATIO

The Model DPMF is designed for surface mounting on any flat surface.

WIRI G

The unit is powered by a 4 to 20 mA loop and the screw terminals for

wiring are located on the back of the adder board marked with + PWR-.

Series DPMF Flush Mount LCD Digital Panel Meter

Installation and Operating Instructions

Bulletin PC-DPMF

SPECIFICATIO S

Input: 4 to 20 mA DC.

Input Impedance: 300 Ω nominal.

Accuracy: ±(0.1% FS + 2 count).

Power Supply: Powered by control loop.

Span and Zero: Adjustable (±1999 counts).

Display: 3-1/2 digits, 7 segments, 0.5˝ (12 mm) H.

Decimal Points: 3-position, user selectable.

Polarity: Automatic, “-” displayed.

Operating Temperature: 32 to 122°F (0 to 50°C).

Storage Temperature: -4 to 158°F (-20 to 70°C).

Mounting: Surface mount.

Connection: Screw terminals.

Conversion Rate: 3 per second.

Warm-Up: 10 minutes typical.

Weight: 1.2 oz (34.5 g).

Agency Approvals: RoHS.

1/4

[6.35]

7/8

[21.77]

[25.40]

Ø1/8

[Ø2.5]

2-3/16

[55.56]

1-1/8

[29.03]

2-3/8

[59.94]

TRANSDUCER

POWER

SUPPLY

ZERO

SPAN

J3 J2 J1

+ PWR -

J5 J4

DWYER I STRUME TS, I C.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGA CITY, I DIA A 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

OPERATIO

Selecting Decimal Point Position

Four decimal point positions are available on the digital panel meter.

Move the jumper to correspond the desired decimal point. See Figure 1.

Figure 1

Setting Min/Max Display Value J1, J2, J3 (see Figure 2 & 3):

If:

The minimum display is ≤0 or minimum display is > 0 and the (maximum

display minimum display) ≥ 5;

Then:

J1, J2 & J3 should be all set to the top jumper (see Figure 2).

Figure 2

If:

The minimum display is > 0 and the (maximum display minimum

display) <5;

Then:

J1, J2 & J3 should all be set to the bottom jumper (see Figure 3).

Figure 3

MAI TE A CE/REPAIR

Upon final installation of the Series DPMF, no routine maintenance is

required. The Series DPMF is not field serviceable and should be

returned if repair is needed. Field repair should not be attempted and

may void warranty.

WARRA TY/RETUR

Refer to “Terms and Conditions of Sale” in our catalog and on our

website. Contact customer service to receive a Return Goods

Authorization number before shipping the product back for repair. Be

sure to include a brief description of the problem plus any additional

application notes.

DWYER I STRUME TS, I C.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGA CITY, I DIA A 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

J3 J2 J1

•

Altri manuali Dwyer Instruments Strumento di misura

Dwyer Instruments

Dwyer Instruments 473B Manuale utente

Dwyer Instruments

Dwyer Instruments 477AV Series Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments DPGW series Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments IC-VP2 Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments TFP-GI Series Documento tecnico

Dwyer Instruments

Dwyer Instruments EMMA Manuale utente

Dwyer Instruments

Dwyer Instruments HF series Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments GFM2 Series Manuale utente

Dwyer Instruments

Dwyer Instruments WSM-10 Manuale utente

Dwyer Instruments

Dwyer Instruments 490A-1 Manuale utente

Dwyer Instruments

Dwyer Instruments IEFB Series Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments VP3 Manuale utente

Dwyer Instruments

Dwyer Instruments Mark II 40 Series Manuale utente

Dwyer Instruments

Dwyer Instruments TAC3 series Manuale utente

Dwyer Instruments

Dwyer Instruments Mark II 40 Manuale utente

Dwyer Instruments

Dwyer Instruments A3000 series Manuale utente

Dwyer Instruments

Dwyer Instruments BPI Series Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments A-464 Manuale utente

Dwyer Instruments

Dwyer Instruments 660 Manuale utente

Dwyer Instruments

Dwyer Instruments DPG-200 Series Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments 485B Istruzioni operative

Dwyer Instruments

Dwyer Instruments WT2-10 Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments 45158 Istruzioni per l'installazione e il funzionamento

Dwyer Instruments

Dwyer Instruments 450 Series Manuale operativo e di manutenzione

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente