Ekwb EK-Vector Radeon VII Backplate Manuale utente

INSTALLATION MANUAL

EK-Vector Radeon VII Backplate

BACKPLATE

- 2 -

This product is intended for installation only by expert users. Please

consult with a qualiﬁed technician for installation. Improper installation

may result in damage to your equipment. EK Water Blocks assumes no

liability whatsoever, expressed or implied, for the use of these products,

nor their installation. The following instructions are subject to change

without notice. Please visit our web site at www.ekwb.com for updates.

Before installation of this product please read important notice,

disclosure and warranty conditions printed on the back of the box.

Before you start using this product please follow these basic

guidelines:

Please carefully read the manual thoroughly before beginning

with the installation process!

Please remove your graphics card from the computer to assure

safest mounting process in order to prevent any possible

damages to your GPU and/or graphics card circuit board (PCB).

This product is anticipated to be used exclusively with EK-

Vector Radeon VII GPU blocks and has not been tested with

any factory or aftermarket heatsinks and water blocks. EK does

not provide any assistance or support in the latter application.

- 3 -

TABLE OF CONTENT

INSTALLING THE BACKPLATE 4

IMPORTANT DISCLOSURES 6

REQUIRED TOOLS 6

SUPPORT AND SERVICE 7

SOCIAL MEDIA 7

- 4 -

INSTALLING THE BACKPLATE

STEP 1

PREPARING YOUR GRAPHICS CARD

EK-Vector Radeon VII Backplate is very simple to install, ﬁrst complete

the installation of your EK-Vector Radeon VII Water Block according

to its installation manual. Using a Phillips head screwdriver remove

the 7 screws and their PVC washers which are marked below.

STEP 1

STEP 2

CUTTING THERMAL PADS

Your backplate is supplied with thermals pads that need to be cut into

smaller pieces in order to cover all VRM components. PLEASE REMOVE

THE PROTECTIVE STICKER FROM BOTH SIDES OF THE TERMINAL

PADS PRIOR TO INSTALLATION.

Replacement thermal pads:

1. Thermal PAD F 1.0mm - (120x16mm) - (EAN: 3830046996732)

2. Thermal PAD F 1.5mm - (120x16mm) - (EAN: 3830046996749)

STEP 2

- 5 -

STEP 3

PLACING THERMAL PADS

Once cut to size the thermal pads should be applied to the backplate as

illustrated below. EK made sure to provide customers with more than

adequate quantity of thermal pads to complete this step.

STEP 4

ATTACHING THE BACKPLATE

Place the backplate onto the PCB aligning all of the holes. Position an

M2.5x7 AX1 screw in each of the seven (7) mounting holes marked below

and then tighten them evenly using a Phillips head screwdriver. Do not use

excessive screwing force.

1+2

STEP 4

STEP 3

- 6 -

IMPORTANT DISCLOSURES

VERY IMPORTANT NOTICE

Once the installation is completed, it is a recommended practice to

test the cooling circuit for leaks prior to powering up the computer.

We recommend a 24 hour leak test prior to powering up the

computer. Do not test the water block using city water pressure. This

will rupture the top of the housing and render the block unusable

(and will void your warranty). While all efforts have been made to

provide the most comprehensive tutorial possible, EK Water Blocks

assumes no liability expressed or implied for any consequential

damage(s) occurring to your equipment as a result of using EK Water

Blocks cooling products, either due to errors or omissions on our

part in the above instructions, or due to failure or defect in the EK

Water Blocks cooling products.

WARRANTY

Our products are warranted against defects in materials or

workmanship for a period of 24 months beginning from the date of

delivery to the ﬁnal user. During this period, products will be repaired

or have parts replaced at our discretion provided that: (I) the product

is returned to the agent from whom it was purchased; (II) the product

has been purchased by an end user and has not used for commercial

purposes; (III) the product has not been misused, handled carelessly,

or used in a manner other than in accordance with the instructions

provided describing its installation and proper use. This warranty does

not confer rights other than those expressly set out above and does

not cover any claims for consequential loss or damage. This warranty

is offered as an extra beneﬁt and does not affect your statutory rights

as a consumer. This warranty is voided if the product comes in contact

with aggressive UV additives or other improper liquids. EK blocks are

sealed with warranty void circular label, which proves that the block

has withstood a pressure leak test. Removing it will void leak-free

guarantee and not the guarantee on the product itself. Any other RMA

issues can be reported to EK Support at www.ekwb.com/support for

further analysis.

REQUIRED TOOLS

Phillips-head screwdriver Scissors

For assistance please contact:

http://support.ekwb.com/

EKWB d.o.o.

Pod lipami 18

1218 Komenda

Slovenia - EU

EKWaterBlocks

@EKWaterBlocks

ekwaterblocks

EKWBofﬁcial

SUPPORT AND SERVICE

SOCIAL MEDIA

Indice

Altri manuali ekwb Hardware per computer

ekwb

ekwb EK-Annihilator EX/EP Series Manuale utente

ekwb

ekwb EK-Classic Pump Reservoir 160 SPC PWM D-RGB Manuale

ekwb

ekwb EK-XLC PREDATOR 240 Manuale utente

ekwb

ekwb EK-PRO GPU WB AMP-Trinity RTX 4090 Ni+Inox Manuale utente

ekwb

ekwb EK-Loop Modulus Series Manuale utente

ekwb

ekwb Supremacy MX AMD Manuale utente

ekwb

ekwb EK-FC Titan Series Manuale

ekwb

ekwb EK-FB ASRock X399 RGB Monoblock Manuale utente

ekwb

ekwb EK-FC780 GTX WF3 Manuale

ekwb

ekwb EK-FB ASUS P7P55 KIT Guida

ekwb

ekwb EK-FB ASUS Maximus XI HERO Manuale utente

ekwb

ekwb EK-Thermosphere Guida

ekwb

ekwb EK-Quantum Vector2 Trio RTX 3080/90 ABP Set... Manuale utente

ekwb

ekwb EK-Quantum Kinetic TBE 120 VTX PWM Manuale utente

ekwb

ekwb EK-Pro AM5 Series Manuale utente

ekwb

ekwb EK-FB ASUS M5E Guida

ekwb

ekwb EK-FC 6970 Manuale

ekwb

ekwb EK-FC 780 GTX Jetstream Manuale utente

ekwb

ekwb EK-FB ASUS R4BE Monoblock Manuale utente

ekwb

ekwb EK-Quantum Momentum TRX40 Aorus Master Manuale utente

ekwb

ekwb EK-FC7970 Lightning Manuale

ekwb

ekwb EK-FC590 GTX Manuale

ekwb

ekwb EK-FC780 Guida

ekwb

ekwb EK-Classic AM4 D-RGB Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

ekwb EK-Vector Radeon VII Backplate Manuale utente

Manuali Hardware per computer popolari di altre marche