Elcometer 319 Standard Manuale utente
English
Elcometer 319
Dewpoint Meter
Operating Instructions
English
R
The Elcometer 319 Dewmeter has
been tested in accordance with EU
regulations governing electro-
magnetic compliance and meets the required
directives.
Note: Gauge readings may be affected if the unit
is operated within a radio frequency
electromagnetic strength of greater than3 V/m.
is a registered trademark of
Elcometer Instruments Ltd.
All other trademarks acknowledged.
© Copyright Elcometer Instruments Ltd.
2001 - 2006.
All rights reserved. No part of this Document may
be reproduced, transmitted, transcribed, stored
(in a retrieval system or otherwise) or translated
into any language, in any form or by any means
(electronic, mechanical, magnetic, optical,
manual or otherwise) without the prior written
permission of Elcometer Instruments Ltd.
Doc No. TMA-0245 Issue 06
Text with Cover No. 16468
1
R
CONTENTS
Section Page
1 About your gauge ....................................2
1.1 Climatic conditions . . . . . . . . . . . . . . . . . . 3
1.2 Standards . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 What the box contains . . . . . . . . . . . . . . . 3
2 Quick start ................................................5
3 Getting started .........................................6
3.1 Fitting batteries . . . . . . . . . . . . . . . . . . . . . 6
3.2 Switching the gauge on and off . . . . . . . . . 6
3.3 What the buttons do . . . . . . . . . . . . . . . . . 7
3.4 What the symbols mean . . . . . . . . . . . . . . 8
4 The sensors ............................................10
5 ∆T Alarm .................................................10
6 Taking a reading ....................................11
7 Using your gauge memory ....................11
7.1 Switching memory on . . . . . . . . . . . . . . . 12
7.2 Storing a reading . . . . . . . . . . . . . . . . . . . 12
7.3 Recalling (viewing) readings . . . . . . . . . . 12
7.4 Printing readings . . . . . . . . . . . . . . . . . . . 13
7.5 Exporting readings . . . . . . . . . . . . . . . . . 14
7.6 Clearing (deleting) readings . . . . . . . . . . 15
8 Gauge set up ..........................................16
9 Data transfer software (EDTS+) ............18
10 Maintenance ...........................................19
11 Surface temperature probes .................20
12 Spare parts and accessories ................20
13 Technical specifications .......................21
14 Related equipment .................................22
2
R
hank you for your purchase of this Elcometer
319 Dewmeter. Welcome to Elcometer.
Elcometer are world leaders in the design,
manufacture and supply of inspection equipment
for coatings and concrete. Our products cover all
aspects of coating inspection, from development
through application to post application inspection.
Your Elcometer 319 Dewmeter is a world beating
product. With the purchase of this product you
now have access to the worldwide service and
support network of Elcometer. For more
information visit our website at
www.elcometer.com
1 ABOUT YOUR GAUGE
The Elcometer 319 Dewmeter gauge is used to
check climatic conditions in the surface treatment
industry.
Your Elcometer 319 measures:
• Air temperature
• Relative humidity
• Surface temperature
From these measured values, your gauge then
calculates:
• Dewpoint temperature
• Delta T (∆T)
The Elcometer 319 Dewmeter has readings
memory and an internal clock. This allows
measurements and a date/time stamp to be
stored as they are taken.
The stored data can be viewed on the display,
printed via an infra-red link or downloaded to a
PC using an optional interface cable.
T
3
R
1.1 Climatic conditions
The risk of condensation
forming on surfaces about to
be coated is always present
and is difficult to assess
without suitable instruments.
In particular, it is difficult to
detect condensation on blast
cleaned surfaces.
Surfaces with a temperature
at or below this dewpoint
temperature will be covered
with condensation/moisture.
It is important to take
measurements at regular
intervals and at different
points on the surface.
Factors like sun, shadow,
shape and mass of the
object to be coated can
create unexpected thermal
behaviour on the surface.
The memory in your Elcometer 319 will record
climatic conditions during a coating job.
1.2 Standards
Your Elcometer 319 Dewmeter can be used in
accordance with the following National and
International standards:
BS 7079-B4 ISO 8502-4
NACE RP propo 97
1.3 What the box contains
• Elcometer 319 Dewmeter
• Carrying case
• Operating instructions
HOLD
ON
OFF
R
319 Dewmeter
4
R
The Elcometer 319 Dewmeter is packed in a
cardboard and foam package. Please ensure
that this packaging is disposed of in an
environmentally sensitive manner. Please
consult your local Environmental Authority for
further guidance.
To maximise the benefits of your new
Elcometer 319 Dewmeter please take some
time to read these Operating Instructions. Do
not hesitate to contact Elcometer or your
Elcometer supplier if you have any questions.
5
R
2 QUICK START
1. Fit batteries (see page 6).
2. Press to switch on.
3. Humidity and Temperature are shown on the
display.
4. If required, press or to change the
type of temperature displayed:
To learn how to store readings in memory, see
“Using your gauge memory” on page 11.
To learn how to set up your gauge, see “Gauge
set up” on page 16.
Ambient Surface Dewpoint Delta T
ON
C
F
%Rh
menu alarm link
Temperature
Humidity
Temperature type
6
R
3 GETTING STARTED
3.1 Fitting batteries
Alkaline batteries must be disposed of carefully to
avoid environmental contamination. Please
consult your local Environmental Authority for
information on disposal in your region.
Do not dispose of any battery in fire.
The condition of the batteries is indicated by a
symbol on the display - see “What the symbols
mean” on page 8.
To retain time and date, fit new batteries within 30
seconds of removal of the exhausted batteries.
Always check the time and date after battery
replacement. Data in the memory is not affected
by removal of the batteries.
3.2 Switching the gauge on and off
To switch the gauge on, press .
To switch the gauge off, press . The guage
can be set to switch off automatically 2 minutes
after the last key press - see “Gauge set up” on
page 16.
3 x LR6 (AA)
batteries
ON
OFF
7
R
3.3 What the buttons do
Scrolls left through
items on the display.
Scrolls right through
items on the display.
Press both arrow
buttons together to access
memory and gauge
configuration.
Freezes the measurements on the display.
If the memory is switched on, press this button
twice to store the measurements in memory.
The function of this button changes when
accessing memory and gauge set up.
Switches the gauge on.
Once the instrument is on, this button switches
on or off the illuminationaof the LCD and the
keyboard.
Switches the gauge off.
While navigating menus, this button escapes
from a menu-option or cancels a choice without
storing data.
a. Illumination switches off automatically after
approximately 40 seconds.
HOLD
ON
OFF
319 Dewmeter
HOLD
ON
OFF
8
R
3.4 What the symbols mean
Menu Indicates that the
display is showing
menu information,
not readings.
Alarm Indicates that ∆T is
less than 3°C.
When ∆T rises
above 3.5°C, the
alarm switches off.
Link Indicates that
memory is on.
Press twice
to store a reading
while memory is
on.
Battery
status
4 segments: Full
1 segment: Empty
Flashing: Change
battery now
Relative
humidity
Time
C
F
%Rh
alarm linkmenu
C
F
%Rh
menu alarm link
C
F
%Rh
menu alarm link
HOLD
C
F
%Rh
menu alarm link
C
F
%Rh
menu alarm link
%R
h
Altri manuali per 319 Standard
1
Indice
Altri manuali Elcometer Strumento di misura
Elcometer
Elcometer Protovale CoverMaster CM52 Manuale utente
Elcometer
Elcometer 224 Manuale utente
Elcometer
Elcometer 456 Manuale utente
Elcometer
Elcometer AVU Manuale utente
Elcometer
Elcometer 407L Manuale utente
Elcometer
Elcometer 116c Manuale utente
Elcometer
Elcometer 205 Manuale utente
Elcometer
Elcometer 456 3 Manuale utente
Elcometer
Elcometer 2290 Manuale utente
Elcometer
Elcometer 224 Manuale utente
Elcometer
Elcometer UG20DL Manuale utente
Elcometer
Elcometer 138 Manuale utente
Elcometer
Elcometer 320 Manuale utente
Elcometer
Elcometer 311 Manuale utente
Elcometer
Elcometer 224 Manuale utente
Elcometer
Elcometer 124 Manuale utente
Elcometer
Elcometer 138 Manuale utente
Elcometer
Elcometer Zahn 2210 Manuale utente
Elcometer
Elcometer 138/2 Manuale utente
Elcometer
Elcometer 112 Manuale utente
