ETI 822-800 Manuale utente
Usage and product properties
• The Water Bath Insulation Balls are to be used in conjunction with the water bath.
• They are placed on the water surface, in order to reduce the loss of water
through evaporation and heat.
• Item supplied: 250 insulation balls (average diameter approx. 20 mm) in a
storage bag.
• Heat resistance: up to 90˚C (floating in the water)
• Material: PP (Polypropylene)
DANGER! Risk of injury through burning
Avoid splashes of hot water when adding and removing the insulation balls and
avoid contact with hot water.
WARNING! Risk of material damage
Keep the insulation balls away from objects over 100˚C, such as a hot plate.
How to use
PLEASE NOTE: Take into account that the water levels in the container will raise
somewhat when the insulation balls are added.
1. Before heating up: place as many insulation balls in the water bath, so that the
surface is completely covered with one layer of balls.
2. After use: let the water cool down, before you remove the insulation balls from
the Water Bath, alternatively use a ladle or similar to remove them.
Water Bath
Insulation Balls
Product Information
Product code:
822-800
Supplied by
Electronic Temperature Instruments Ltd
Worthing · West Sussex · BN14 8HQ
01903 202151 · sales@etiltd.com · etiltd.com 26.05.21
Cleaning and storage
• Rinse the insulation balls with clean tap water.
• If required, the insulation balls may be cleaned in mild dishwater. Rinse them
with clean water afterwards.
• Let the insulation balls dry completely before storing them in the storage bag.
Indice
Altri manuali ETI Elettrodomestico da cucina
