Eureka voyage Manuale utente
VOYAGE™ STEAMER
INSTRUCTIONS MANUAL
Cautions for the rst use
Remember, safety should be your rst priority.
1. Never ll the water reservoir when the power cord is plugged in.
2. Allow the appliance to cool for at least 5 minutes after it has
been used.
3. Do not place on unstable surfaces such as cushions while using
the steamer.
4. Do not place steamer close to walls and furniture, as steam may
cause discoloration and warping.
5. Never add cold water to hot water; steam may shoot out of the
lling hole and cause injuries. Always let the appliance cool before
adding water.
1
Safety Instructions
1. Whenever you need to step away from the steamer, make sure that you
unplug it and leave the steamer in a vertical position.
2. Please keep out of reach of children.
3. DO NOT operate steamer if it has been dropped, damged or
has malfunctions in any way.
4. CAUTION! Make sure your steamer is disconnected from the power
supply before pouring water into the tank.
5. DO NOT immerse any part of the steamer in any type of liquid.
6. DO NOT use the steamer if the cord is damaged. Consult with the
manufacturer to get your steamer xed or replaced.
(See last page for instructions)
7. To prevent deposition of minerals in the steam holes, it is
recommended to use distilled water for cleaner steam holes.
8. Never use chemically descaled water.
9. Avoid directing steam towards people or animals. Steam is hazardous
and can cause severe skin burns.
2
Parts & Features
1. Steaming Head
2. Easy-Grip Handle
3. Water Tank Window
4. Steamer’s Body
5. LED ON/OFF Button
3
MAX
MIN
Filling with Water
1. Before lling the water tank, make sure the steamer is unplugged
and held straight or placed on a at level surface.
2. Open up the water tank by turning the steaming head to the Left
and add cold clean water by using the measuring cup. Carefully
monitor the water tank level during this process to prevent overlling.
3. Never ll the water tank past the MAX line.
4. Place steaming head back on and turn to the Right to close.
4
5
Steaming
1. Fill the water tank in accordance with the “Filling with Water” instructions.
2. Plug the cord into the outlet.
3. By pressing the ON/OFF button, the steamer will automatically start
heating up to an adequate and optimal steaming temperature.
4. The light “ON” indicates that the steamer’s heating system is currently
working and maintaining an optimal steaming temperature.
5. Place the garment on a clean hanger.
6. Begin steaming slowly from the bottom to the top of the garment. The
steam will rise along the inside and outside of the fabric, removing
wrinkles (ONLY steam with vertical movements, NOT from side to side)
7. Periodically point the steamer away from the garment and smooth
the fabric with your free hand.
8. Repeat steps 6-7 as necessary until garment is free of wrinkles.
9. When done steaming, press the On/O button, unplug and allow the
steamer to cool before putting steamer away.
Steaming Tips
1. Steaming on both sides of the fabric will help to remove stubborn wrinkles.
2. Delicate fabrics need to be steamed carefully to avoid damage by
water spotting.
3. Drapery and curtains can be steamed while still hanging.
4. Caution should be taken while using a ladder or step ladder.
DO NOT use a stool, chair or revolving chair.
5. To steam towels, handkerchiefs and napkins, hang them over a rod or
towel holder.
Handling & Storing
1. Use distilled water to avoid material build-up.
2. Empty any remaining water into a sink to minimize mineral build-up.
3. Store the steamer in a cool, dry place.
6
7
Troubleshooting
Problem Possible Reasons
No light on the
switch
Steamer heats
up but there is no
steam
Water sprays out
from the steamer’s
head
Plug the steamer power cord
into an electrical outlet
Release some water from the
tank until the water level is
below or at the MAX level
Rell the water reservoir
The steamer is not plugged in
The water reservoir is empty
The household circuit breaker has
been tripped; there is a blown fuse
in the electrical circuit.
There is a mineral build-up in the
steamer
The water tank is overloaded
To remove mineral build-up
make sure that the steam holes
on the cap are not clogged. Use
a pin or any sort of thin pointed
object which can t through the
hole to remove the build-up.
Reset the household circuit
breaker or replace the blown
fuse. Contact an electrician or
your area’s electric provider.
Solution
8
This product has a warranty for 1 year from provable date of purchase against defects in material and
workmanship. During this period such defects will be repaired, or the product will be replaced at no charge.
This warranty does not cover damage caused by misuse, negligence, or improper installation. Warranty
is also invalid in any case that the product is taken apart or serviced by an unauthorized service station.
TO CLAIM:
Purchaser must receive a Return Authorization Number by calling our service center at 1-844-EUREKA5
(844-387-3525) or visit our website www.eurekagarmentcare.net for more info. Once your return has been
authorized, please send your package, prepaid postage, with a copy of your proof of purchase. You will
also need to enclose a letter explaining the nature of your diculty in detail. Please allow 2-4 weeks for
return shipping.
Smartek USA Inc.
12 Hinsdale Street, NY 11207
Eureka is a registered trademark used under license from Electrolux Home Products Inc. Designed in USA.
Assembled in China. © 2017
Warranty
Altri manuali per voyage
1
Indice
Altri manuali Eureka Elettrodomestico da cucina
