Extech Instruments CO10 Manuale utente
User's Guide
Carbon Monoxide Meter
Model CO10
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
CO10-EU-EN v2.3 12/13
2
Introduction
Congratulations on your purchase of the Extech C010 Carbon Monoxide Meter. The CO10
measures and displays CO concentrations between 0 and 1000 parts per million (ppm).
Safety Information
Carbon monoxide is life threatening even at relatively low concentrations; learn
and recognize the effects of CO poisoning (see Table below). Do not use this
meter as a personal safety monitoring device.
Effects of CO poisoning
0-1 PPM Normal background levels
9 PPM Maximum indoor air quality level
50 PPM Maximum 8 hour average exposure level
200 PPM Mild headache, fatigue, nausea and dizziness
400 PPM Frontal headache, life threatening after 3 hours
800 PPM Dizziness, nausea, convulsions, DEATH WITHIN 2 TO 3 HOURS
1600 PPM Nausea within 20 minutes, DEATH WITHIN 1 HOUR
12800 PPM DEATH WITHIN 2 TO 3 MINUTES
Ensure that the meter is turned on in an area free of
CO. If not, the meter will read incorrectly when
subsequently measuring CO.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
CO10-EU-EN v2.3 12/13
3
6
1
3
5
4
2
7
Meter Description
1. LCD display
2. Power ON/OFF key
3. MODE key
4. Power on/Alarm light
5. SEL key
6. Sensor
7. Battery compartment
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
CO10-EU-EN v2.3 12/13
4
Operation
MEASUREMENTS
IMPORTANT: Ensure that the meter is turned on in an area free of CO. If not, the meter will
read incorrectly when subsequently measuring CO.
1. Press the ON/OFF button to turn the meter on.
Allow time for the meter to perform the self test and for the display to
settle.
2. To use the meter, trace the CO10 around the area of the suspected
leak.
3. The meter will indicate the presence of CO (in ppm) on the LCD display. An audible beep will
sound at 35 ppm alerting the user that the threshold of dangerous CO levels has been
detected. The higher the concentration of CO, the faster the beeper will sound. Above 200PPM
the beeper will sound continuously.
4. To turn the meter off, press the ON/OFF key. If the meter is left on, the meter will automatically
power off after 15 minutes.
MODE Button Functions
Press the MODE button to step through the following functions..
1. Maximum Data Mode: Displays the highest reading taken. This reading
is cleared when the meter is powered off.
2. Recall Data Mode: Press the SEL button to step through and recall the
data from the 10 memory locations. The current memory location (0-9)
is displayed in the top right.
3. Store Data Mode: In this mode, you can store the reading to the next
available memory location by pressing the SEL button. “REC” is
displayed in the top right.
4. Recall Alarm Mode: The meter will display the alarm level data setting
─“30ppm”.
Zero Mode: Press the SEL button for over 8 seconds to enter the
manual zero adjusting mode. The zero value will blink and then the
display will 0 and the meter will return to the Measure Mode.
5. Measuring Time Mode/Auto Power Off disable: This mode will
display how long the meter has been on taking measurements. The
time is cleared when the meter is powered off. The auto power off
function is disabled in this mode. In all other modes, auto power off is
enabled and will power off after 15 minutes of inactivity.
6. Audible Alarm Enable/Disable:The audible alarm can be turned on/off
by pressing the SEL button. “on” or “off” will be displayed on the LCD.
The alarm light will remain enabled in either setting.
Backlight In the measure mode press and hold the SEL button for 4 seconds to turn the backlight
on/off. Press the MODE button to enter maximum data mode.
MAX
REC
MEM
REC
Time
PPM
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
CO10-EU-EN v2.3 12/13
5
Specifications
Measurement range 0-1000 ppm
Resolution 1 ppm
Accuracy ±5% or ±10 ppm (whichever is greater)
Sensor Type Stabilized electrochemical Gas-specific (CO)
Sensor Life (Typical) 3 years
Warm-up Period <2 seconds
Power supply 9V Battery (NEDA 1604 or IEC6F22)
Battery life Approx. 50 hours with alkaline battery
Operating Temperature 0 to 50oC (32 to 122oF)
Storage Temperature -30 to 60oC (-22 to 140oF)
Operating Humidity 0 to 99% RH (non condensing)
Dimensions 160 x 56 x 40mm (6.3 x 2.2 x 1.57”)
Weight 180g (6.35oz)
You, as the end user, are legally bound (EU Battery ordinance) to return all used
batteries, disposal in the household garbage is prohibited! You can hand over your
used batteries / accumulators at collection points in your community or wherever batteries
/ accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
Indice
Altri manuali Extech Instruments Strumento di misura
Extech Instruments
Extech Instruments 407114 Manuale utente
Extech Instruments
Extech Instruments RH520 Manuale utente
Extech Instruments
Extech Instruments RT32 Manuale utente
Extech Instruments
Extech Instruments SP505 Manuale utente
Extech Instruments
Extech Instruments MS400 Manuale utente
Extech Instruments
Extech Instruments ExStik FL700 Manuale utente
Extech Instruments
Extech Instruments 475040 Manuale utente
Extech Instruments
Extech Instruments RPM250W Manuale utente
Extech Instruments
Extech Instruments HDV7C-A2-39-HD-1 Manuale utente
Extech Instruments
Extech Instruments MO290-NISTL Manuale utente
Extech Instruments
Extech Instruments HD450-NIST Manuale utente
Extech Instruments
Extech Instruments DT300 Manuale utente
Extech Instruments
Extech Instruments SL250W Manuale utente
Extech Instruments
Extech Instruments HD300 Manuale utente
Extech Instruments
Extech Instruments UM200 Manuale utente
Extech Instruments
Extech Instruments MO53 Manuale utente
Extech Instruments
Extech Instruments SL10 Manuale utente
Extech Instruments
Extech Instruments GX900 Manuale utente
Extech Instruments
Extech Instruments EC150 Manuale utente
Extech Instruments
Extech Instruments BR250 Manuale utente
