Extech Instruments BR50 Manuale utente

User's Guide

Video Borescope and CCTV Tester

Model BR50

www.ponpe.com

contact:

[email protected]

BR50-EU-EN-V1.0 5/11

Introduction

Congratulations on your purchase of the Extech BR50 Video Borescope. This instrument was

designed for use as a remote inspection device and a CCTV camera alignment/inspection tool. Typical

applications include HVAC inspection, automotive inspection, and cable routing. The BR50 is also

useful for automotive, boat, and aircraft inspection. This meter is shipped fully tested and, with proper

use, will provide years of reliable service.

Features

zReal time video inspection

zSupports closed circuit TV input

zBright LEDs to illuminate the area to be inspected

zBuilt-in rechargeable lithium battery, with AC charging or USB charging

zSupports NTSC and PAL formats

Safety

Before using the instrument, please read all safety and specification information carefully

Dangerous electrical voltages may exist behind walls and inside machinery. Be careful not

to make contact with electrical cables, wires, and circuits with the gooseneck; electrical

shock could result.

Double insulation in accordance with CE standards

1. The meter should only be opened and serviced by qualified and authorized personnel

2. Do not handle the meter in a rough or careless manner. The meter houses sensitive

instrumentation and should not be dropped or impacted in any way

3. The camera is water-proof; however the scope body is not water-proof. Do not expose the

instrument to rainy or wet areas, and do not operate the meter in moist locations.

4. Do not aim the camera directly toward the sun from an indoor or an outdoor perspective. Do

not operate the unit under a spotlight or other unusually strong light.

5. Operate the camera under the specified temperature, humidity and power supply conditions

only.

contact:

[email protected]

www.ponpe.com

BR50-EU-EN-V1.0 5/11

Meter Description

1. Camera connection jack

2. External AV input jack

3. LCD Display

4. Status LED

5. Power / Brightness button

6. Charging cable connector

7. Flexible Gooseneck

8. Camera connection plug

9. Camera and LED lights

10. System reset button (rear view)

11. Four (4) housing screws (rear view)

contact:

[email protected]

www.ponpe.com

BR50-EU-EN-V1.0 5/11

Operation

Power the Meter

1. Power Switch: Press and hold the Power button and the display will illuminate if the internal

battery is charged. Press and hold the Power button again to switch off the Video Borescope.

2. Charging the Battery:

a. Before charging, make sure the meter is switched off.

b. Connect the smaller end of the charging cable to the meter.

c. Connect the other end of the charging cable to the AC plug or a PC USB port.

d. A flashing red Status LED indicates the battery is charging. A solid green Status LED

indicates a fully charged meter.

Borescope Operation

1. Connect the camera and gooseneck to the meter

2. Power on the meter

3. The camera image will appear on the display.

4. The camera is now ready for inspections

Light Source level adjustment

1. There are six levels of light brightness adjustments (the default is level 3).

2. Press the power button momentarily to step through the brightness levels.

CCTV Operation

1. Connect the output of a CCTV camera to the AV input connector on the meter.

2. Power on the meter

3. After a few seconds, the camera image will appear on the display.

4. The CCTV camera is now ready for alignment.

Notes:

Signal Switching: The meter defaults to the borescope input. If a signal is applied to the AV jack

the unit will automatically switch to that mode within 5 seconds. When the AV signal is removed, the

meter automatically switches to the borescope mode within 2 seconds.

Signal format conversion: The borescope mode defaults to PAL format. The AV input signal is

converted to NTSC / PAL format automatically.

Auto Power off: If no input is detected, the LCD displays the NO SIGNAL message, the LED

flashes green and the meter enters standby mode.

Reset: Large magnetic fields or other disturbances could “lock up” the meter. If this occurs, press

the RESET button on the rear of the meter.

Battery Power Indication

1. Low Power: When the battery voltage falls below 3.3V, the LCD display shows the symbol

in the upper right hand corner, indicating a low battery condition.

2. Recharging: The charging indication indicates that the battery is

charging.

3. Full Charge: When the battery voltage is greater than 4.0V, the battery symbol will be full.

contact:

[email protected]

www.ponpe.com

BR50-EU-EN-V1.0 5/11

Battery Replacement

The meter contains a rechargeable battery which is not user replaceable. Contact Extech or your

distributor for replacement details.

All EU users are legally bound by the battery ordinance to return all used batteries to

collection points in your community or wherever batteries / accumulators are sold!

Disposal in the household garbage is prohibited!

Specifications

Camera

Sensor size ¼” CMOS

Sensor pixels 300,000

Maximum frame rate 30 FPS

Color resolution 24 Bit

Focusing method Fixed focus 15cm to 25cm (5.9” to 9.8”)

Gooseneck length 1m (39”)

Camera diameter 17mm (0.66”)

LCD Display 2.4” Color LCD

Display resolution 480 (W) X 234 (H) pixels

Active area 48mm x 35.6mm (1.9 x 1.4”)

Light Source 4 LEDs

Adjustable light intensity 6 illumination levels

Video format NTSC/PAL (automatic conversion)

Power Rechargeable 1800mAH lithium battery

Current consumption 400mA max.

Standby current 5mA max.

Low battery warning Voltage falls below 3.3V

Enviormental

Operating Temperature 32°F ~ 122°F (0°C ~ 50°C)

Relative Humidity 85% max.

www.extech.com

www.ponpe.com

contact:

[email protected]

Indice

Altri manuali Extech Instruments Apparecchiature di prova

Extech Instruments

Extech Instruments ET23B Manuale utente

Extech Instruments

Extech Instruments ET10 Manuale utente

Extech Instruments

Extech Instruments 412355A Manuale utente

Extech Instruments

Extech Instruments ET10 Manuale utente

Extech Instruments

Extech Instruments MS6100 Manuale utente

Extech Instruments

Extech Instruments ET60 Manuale utente

Extech Instruments

Extech Instruments ET15 Manuale utente

Extech Instruments

Extech Instruments BR90 Manuale utente

Extech Instruments

Extech Instruments 480400 Manuale utente

Extech Instruments

Extech Instruments 407744 Manuale utente

Extech Instruments

Extech Instruments VT30 Manuale utente

Extech Instruments

Extech Instruments GX930 Manuale utente

Extech Instruments

Extech Instruments 380260-NIST Manuale utente

Extech Instruments

Extech Instruments MG320 Manuale utente

Extech Instruments

Extech Instruments 380260 Manuale utente

Extech Instruments

Extech Instruments CB10 Manuale utente

Extech Instruments

Extech Instruments ET60 Manuale utente

Extech Instruments

Extech Instruments 382252 Manuale utente

Extech Instruments

Extech Instruments 382357 Manuale utente

Extech Instruments

Extech Instruments HDV600 Manuale utente

Extech Instruments

Extech Instruments ET26B Manuale utente

Extech Instruments

Extech Instruments ET10 Manuale utente

Extech Instruments

Extech Instruments RT30 Manuale utente

Extech Instruments

Extech Instruments VT10 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente