Forward STM-6000 Manuale utente

User manual

HD Digital Meter

Satellite & Terrestrial

STM-6000

STM

6000

Table of Content

Description.......................................................................................................4

Safety instructions ..........................................................................................4

Safety of persons...............................................................................................4

General information...........................................................................................5

Appropriate Usage ..........................................................................................6

Delivery range..................................................................................................6

Device overview...............................................................................................7

Start of operation.............................................................................................9

Battery ...............................................................................................................9

Switch-on the Device.........................................................................................9

Lithium-ions-battery......................................................................................10

Charging the battery........................................................................................10

Storing of the batteries ....................................................................................10

System setting...............................................................................................11

Language Setup..............................................................................................11

INFO...................................................... .........................................................12

Factory Default.................................................................................................12

Factory reset..................................................................................................14

Satellite finding..............................................................................................15

Finding channels manual.................................................................................16

Lining satellite aerial up...................................................................................16

T/T2 finding…………………………………………………………………………..18

Finding channels manual..................................................................................19

Lining T2 antenna up.......................................................................................20

M6000

ete

3 |

Satel

ite settin

.............................................................................................

USB...............................................................................................................25

Updating and Backup Data..................................................... .....................25

Angle calculation.........................................................................................28

pectru

.......................................................................................29

Technical specifications..............................................................................31

Warrenty........................................................................................................33

STM

6000

MBO

eter

Descriptio

The Satellite meter is a handy digital antenna measuring device for an quick

and easy alignment of satellite antennas. If a satellite is found, the m

eter

shows it on the display and emits a audible signal. Signal strength and quality

are displayed as numerical values and bar graphs. Another measurem

ent

value is the forward error correction (FEC) and the bit error rate (BER). I

addition, the picture quality can be revised on the high-resoluted 3.5-inch

TFTLCD screen. Many satellites are pre-programmed in order to an quick

antenna adjustm

ent.

The scope of supply contains, among the charger, a USB cable which allow

you to update software

A carrying case serves as protection and for the transport. It cares f

or better

readability of the display at sunshin

Safety instructi

ons

Attention!

Please read the safety instructions carefully before operati

the devic

Please follow all warnings and instructions on the equipm

ent

and in the operating manual

Safety of pers

ons

Ensure that nobody can be hurt by falling tools or parts of the satelli

antenna during the adjustment and installation of the antenna. For your o

security use a rope on sloping roofs

STM

6000

ete

5 |

General informatio

Attention!

The devise should only be operated with the supplied

adapter at the mains

Do not open the meter or the included AC adapter. There is

danger of life through electric shock!

Wrong usage of the ports can lead to the destruction of the

measuring devic

Proceed carefully with the measuring devic

Avoid low temperatures (below 0 °C) or to high humidity

The TFT display can be damaged by mechanical impacts

Avoid excessive input voltages

Do not operate with the devic

if it has visible dam

age,

if there are loose parts in the devic

if the device was located outdoors or in damp rooms a extended period of

tim

STM

6000

Appropriate Us

age

The measuring device meter was developed to measure signals o

digital satellite antennas and satellite systems. It is exclusively for this purpos

and should only be used for this purpose. Use the equipment only f

or the

purpose, which is described in this manual

Follow all information in this manual, particularly the safety instructions

page

Any other usage is rated as not properly and can result in damage or even

injury

There will be no liability for damages caused by a non-intended use.

Delivery ran

Please check if the delivery is compl

ete.

Included in delivery:

device m

eter,

a carrying b

ag ,

an extern c

harger,

an power cabl

an user manual

If the delivery should be incomplete, contact your specialist deal

STM6000

ete

Device overview

Figure 1: Front of the met

M6000

8 |

No. Description

1 LNB-IN Digital satellite signal inpu

2 LC-Display Display of the TV picture, the menu and the

measured values

3 POWER-LED Display of the energy state:

Operati

on:

red: the measuring devise is switched on

Off: the measuring devise is switched off

In charge:

Green: The battery is charged

Red: The battery is full charged

4 LOCK-LED LED lights when a signal is received.

5 FUNCTION

keys

F1: shortcut key

F2: shortcut key

F3: shortcut key

F4: shortcut key

5.1 22K/13V/18V

-LEDs

Lights if 22K/13V/18V signals are received

6.1

Navigation-

cross

OK - button

Navigation through menus

switching programs ▲, ▼

volume control ◄, ►

OK button: confirmation of a selection

7 Numeric keys Direct enter of numbers

8 FIND-button FIND menu: for a quick and easy alignment of a

satellite antenna

9 Menu-button Display the main menu

10 EXIT-button Leave the current menu, cancel operation

11 ANGLE-

button

Display the calculation menu

12 SYSTEM-

button

Configuration of all system param

eter.

Display current software version.

13 POWER-

button

Switch devise on/o

14 SCAN-button Display the auto scan men

15 AC adapte

port

Low volt port – for power supply connection

16 USB-Port USB port for PC connectio

17 SPTRUM

button

Display the menu of spectrum

STM6000

ete

Start of operati

Battery

Before the first operation with the measuring device charge the battery

completely. (see also chapter “Lithium-Ion battery” on page

11).

Load the accumulator during the first loading procedure at least

hours

The maximum battery charging time is approximately 12 hours

Switch-on the Devi

ðPress 2 seconds the red power button on the m

eter.

M6000

10 |

Lithium-ions-battery

Explosion danger!

Never the two poles (+ and -) connect with each other!

Attention!

Storing or operating accumulator no more than 40° C.

Not burning or damaging accumul

ator.

Not taking accumulator to contact with wat

er.

Charging the battery

The maximum battery charging time is approximately 12 hours

A charging circuit in the measuring device provides an optimal charge of

the

battery. The device is charged if it is switched off

èTurn the device off, if it is not already off

èConnect the Euro-main cable with the external AC ada

pter.

èConnect the external AC adapter to the power gri

èConnect the AC adapter to the low-voltage port at the bottom

èThe battery is charged as soon as you connect the AC adapter to

the

eter

The Power-LED shows the battery status

green: the battery is char

ged

red: the battery is completely load

Storing of the batte

ries

Storing the batteries between 0° Celsius and 40° Celsius

Loading the accumulator at a longer storage every two weeks to

avoid a depth disch

arge.

Indice

Altri manuali Forward Strumento di misura

Forward

Forward SCM-6000 Manuale utente

Forward

Forward STM-8800 Manuale utente

Forward

Forward STM-6600 Manuale utente

Forward

Forward SM-8800 Manuale utente

Forward

Forward SCM-8000 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente