Forward STM-8800 Manuale utente

FULLHDComboFinderMeter

STM-8800

HDDVB-S2/S+DVB-T2/T+Spectrum

Meter

Usermanual

STM8800

2 |ENG

Table of Contents

Description....................................................................................................... 4

Safety instructions........................................................................................... 4

Safety of persons............................................................................................... 4

General information.......................................................................................... 4

Appropriate Usage.......................................................................................... 5

Delivery range................................................................................................. 5

Device overview............................................................................................... 6

Start of operation.............................................................................................8

Battery.............................................................................................................. 8

Switch-on the Device........................................................................................ 8

Lithium-ions-battery....................................................................................... 9

Charging the battery.......................................................................................... 9

Storing of the batteries...................................................................................... 9

System setting................................................................................................ 10

Language Setup............................................................................................ ...10

Factory Default.................................................................................................11

Factory reset................................................................................................. ...11

Factory reset.................................................................................................. 11

Satellite finding ............................................................................................. 12

Finding channels manual ................................................................................ 12

Lining satellite aerial up.................................................................................. 13

T/T2 finding................................................................................................... 14

Finding channels manual …...................................... ........................... .........14

Lining T/T2 antenna up --------------------------------------------------------------15

Installation ----------------------------------------------------------------------------16

Satellite setting----------------------------------------------------------------------------16

Dish Set up---------------------------------------------------------------------------------16

DiSEqC Setup-----------------------------------------------------------------------------17

USB--------------------------------------------------------------------------------------19

File Viewer----------------------------------------------------------------------------------19

Updating-------------------------------------------------------------------------------------20

Backup Data---------------------------------------------------------------------------------20

STM8800

3 |ENG

Angle calculation........................................................................................... 21

Spectrum........................................................................................................ 21

AV Setup........................................................................................................ 21

Disposal.............................................................................................. ............24

Technical specifications...................................................................... ..........25

Warrenty............................................................................................ ............26

STM8800

4 |ENG

Description

The Satellite meter is a handy digital antenna measuring device for an quick

and easy alignment of satellite antennas. If a satellite is found, the meter

shows it on the display and emits a audible signal. Signal strength and quality

are displayed as numerical values and bar graphs. Another measurement

value is the forward error correction (FEC) and the bit error rate (BER),

Modulation error rate(MER),In addition, the picture quality can be revised on the

high-resoluted 4.3-inch TFT LCD screen. Many satellites are pre-programmed in

order to an quick antenna adjustment.

The scope of supply contains, among the charger, an USB connector which allows

you to update software.

A carrying case serves as protection and for the transport. It cares for better

readability of the display at sunshine.

Safety instructions

Attention!

Please read the safety instructions carefully before operating

the device.

Please follow all warnings and instructions on the equipment and

in the operating manual.

Safety of persons

Ensure that nobody can be hurt by falling tools or parts of the satellite

antenna during the adjustment and installation of the antenna. For your own

security use a rope on sloping roofs.

General information

Attention!

The devise should only be operated with the supplied AC

adapter at the mains.

Do not open the meter or the included AC adapter. There is

danger of life through electric shock!

Wrong usage of the ports can lead to the destruction of the

measuring device.

STM8800

5 |ENG

Proceed carefully with the measuring device:

Avoid low temperatures (below 0 °C) or to high humidity.

The TFT display can be damaged by mechanical impacts.

Avoid excessive input voltages.

Do not operate with the device:

if it has visible damage,

if there are loose parts in the device,

if the device was located outdoors or in damp rooms a extended period of time.

Appropriate Usage

The measuring device meter was developed to measure signals of

digital satellite antennas and satellite systems. It is exclusively for this purpose

and should only be used for this purpose. Use the equipment only for the

purpose, which is described in this manual.

Follow all information in this manual, particularly the safety instructions on

page 4

Any other usage is rated as not properly and can result in damage or even injury.

There will be no liability for damages caused by a non-intended use.

Delivery range

Please check if the delivery is complete.

Included in delivery:

Tool case

device meter

a carrying bag

an extern charger

an power cable

AV cable

F connnector

an user manual CD

If the delivery should be incomplete, contact your specialist dealer

STM8800

6 |ENG

Device overview

LNB IN : Connect this port to the satellite atn cable

RF IN: Not connect

DC 14V: Power supply port

AV OUT: Connect this port to TV’S CVBS via AV cable

HDMI: Connect this port to TV HDMI port via HDMI cable

AV IN: Connect the port to other’s CVBS Cable

STM8800

7 |ENG

Figure: Front of the meter

No. Description

1 LNB1-IN

LNB2-IN

Digital satellite signal input

2 LC-Display Display of the TV picture, the menu and the

measured values

3 POWER-LED

Display of the energy state:

Operation:

red: the measuring devise is switched on.

Off: the measuring devise is switche

d off.

In charge:

Green: The battery is charged

Red: The battery is full charged

4 LOCK-LED LED lights when a signal is received.

5 FUNCTION keys

F1: shortcut key

F2: shortcut key

F3: shortcut key

F4: shortcut key

5.1 22K/13V/18V-L

EDs

Lights if 22K/13V/18V signals are received

6.1

Navigation-cross

Navigation through menus,

switching programs ▲, ▼

volume control ◄, ►

OK button: confirmation of a selection

7 Numeric keys Direct enter of numbers

STM8800

8 |ENG

8 FIND FIND menu: for a quick and easy alignment of

a satellite antenna

9 Menu Display the main menu

10 AV Switch AV input or out put setup

11 ANGLE Display the calculation menu

12 SYSTEM Configuration of all system parameter.

Display current AV setup.

13 POWER Switch on the power on at 2-3 second

14 SCAN Display the auto scan menu

15 OFF Switch off the power

16 T/R Switch the TV or Radio program display

17 SPTRUM Display the menu of spectrum (for spectrum

meter only)

Start of operation

Battery

Before the first operation with the measuring device charge the battery completely. (see also

chapter “Lithium-Ion battery” on page 10).

Load the accumulator during the first loading procedure at least 5

hours.

The maximum battery charging time is approximately 12 hours.

Switch-on the Device

ðPress 2-3 seconds the red power button on the meter.

STM8800

9 |ENG

Lithium-ions-battery

Explosion danger!

Never the two poles (+ and -) connect with each other!

Attention!

Storing or operating accumulator no more than 40° C.

Not burning or damaging accumulator.

Not taking accumulator to contact with water.

Charging the battery

The maximum battery charging time is approximately 12 hours.

A charging circuit in the measuring device provides an optimal charge of the

battery. The device is charged if it is switched off.

èTurn the device off, if it is not already off.

èConnect the Euro-main cable with the external AC adapter.

èConnect the external AC adapter to the power grid.

èConnect the AC adapter to the low-voltage port at the bottom.

èThe battery is charged as soon as you connect theAC adapter to the

meter

The Power-LED shows the battery status:

Red: the battery is charged

Green: the battery is completely loaded

Storing of the batteries

Storing the batteries between 0° Celsius and 40° Celsius.

Loading the accumulator at a longer storage every two weeks to

avoid a depth discharge.

STM8800

10 |ENG

System setting

èPress the MENU button.

èSelect the point system setting.

èConfirm your selection using the OK button.

Figure 2: System setting

language Setup

Press the SYSTEM button to change the menu language.

_Select the point Language setup.

_Choose your desired language using the ◄- or ►- button.

_After your selection press the EXIT button and follow the instructions on.

Indice

Altri manuali Forward Strumento di misura

Forward

Forward STM-6600 Manuale utente

Forward

Forward STM-6000 Manuale utente

Forward

Forward SCM-8000 Manuale utente

Forward

Forward SM-8800 Manuale utente

Forward

Forward SCM-6000 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente