FS S5860 Series Manuale utente
MANAGED L3 ENTERPRISE SWITCHES
S5860 Series Switches
Quick Start Guide V1.0
MGMT
SYS PWR FAN PoE
1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PoE FUNC
S5860-24XB-U
Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=OverLoad
CONSOLE
Yellow=100M
S5860-48SC
1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F 17F 18F 19F 20F 21F 22F 23F 24F 25F 26F 27F 28F 29F 30F 31F 32F 33F 34F 35F 36F 37F 38F 39F 40F 41F 42F 43F 44F 45F 46F 47F 48F
100G
49F 50F 51F 52F 53F 54F 55F 56F
Status ID
MGMT
CONSOLE 25G
STATUSPWR1PWR2 FANMGMT ID
1234
21 43 65 87 109 1211 1413 1615 1817 2019 2221 2423 40GBreakout
25
26
S5860-20SQ
40G
FUNC
Introduction
Thank you for choosing S5860 Series Switches. This guide is designed to familiarize you with the
layout of the switch and describes how to deploy the switch in your network.
Accessories
S5860-20SQ
S5860-20SQ/S5860-24XB-U
S5860-48SC
S5860-24XB-U
MGMT
SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PoE FUNC
S5860-24XB-U
Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=Over Load
CONSOLE Yellow=100M
MGMT
CONSOLE 25G
STATUSPWR1PWR2 FAN MGMT ID
123 4
21 43 65 87 109 1211 1413 1615 1817 2019 2221 2423 40G Breakout
25
26
S5860-20SQ
40G
FUNC
S5860-48SC
1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F 17F 18F 19F 20F 21F 22F 23F 24F 25F 26F 27F 28F 29F 30F 31F 32F 33F 34F 35F 36F 37F 38F 39F 40F 41F 42F 43F 44F 45F 46F 47F 48F
100G
49F 50F 51F 52F 53F 54F 55F 56F
Status ID
Power Cord x2
Mounting Bracket x2 M4 Screw x8
Rubber Pad x4Grounding Cable x1
S5860-48SC
NOTE: S5860 series switches have dust plugs delivered with them. Keep the dust plugs
properly and use them to protect idle optical ports.
Hardware Overview
Front/Back Panel Ports
S5860-20SQ
MGMT
CONSOLE 25G
STATUSPWR1 PWR2 FAN MGMT ID
123 4
21 43 65 87 109 1211 1413 1615 1817 2019 2221 2423 40G Breakout
25
26
S5860-20SQ
40G
FUNC
USB CONSOLE QSFP+
MGMT SFP+ SFP28
Grounding Cable x1Power Cord x2 Mounting Bracket x2 M4 Screw x14
M6 Screw x8 M6 Nut x8 Inner Rail x2Slide Rail x2
S5860-48SC
Ports Description
RJ45
SFP+
SFP28
100M/1/2.5/5/10G ports for Ethernet connection
SFP+ ports for 1/10G connection
SFP28 ports for 10/25G connection
QSFP+
QSFP28
MGMT
QSFP+ ports for 40G or 4x 10G connection
QSFP28 ports for 40/100G connection
An out-of-band Ethernet management port
CONSOLE An RJ45 console port for serial management
USB A USB management port for software and conguration backup and oine
software upgrade
S5860-48SC
1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F 17F 18F 19F 20F 21F 22F 23F 24F 25F 26F 27F 28F 29F 30F 31F 32F 33F 34F 35F 36F 37F 38F 39F 40F 41F 42F 43F 44F 45F 46F 47F 48F
100G
49F 50F 51F 52F 53F 54F 55F 56F
Status ID
USB
CONSOLE
SFP+ QSFP28
Status Status Status
Status
FUNC
ID
Link ACT
Status
PWR1
PWR2
1 2 3
4
MGMT
CONSOLE
AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB
MGMT
MGMT
S5860-24XB-U
USB CONSOLE RJ45 SFP+ SFP28
MGMT
SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PoE FUNC
S5860-24XB-U
Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=OverLoad
CONSOLE Yellow=100M
NOTE: The FUNC button of the S5860-48SC is reserved.
Ports Description
MGMT
CONSOLE 25G
STATUSPWR1 PWR2 FAN MGMT ID
123 4
21 43 65 87 109 1211 1413 1615 1817 2019 2221 2423 40G Breakout
25
26
S5860-20SQ
40G
FUNC
Front/Back Panel Buttons
S5860-20SQ
FUNC
Status Status Status
Status
FUNC
ID
Link ACT
Status
PWR1
PWR2
1 2 3
4
MGMT
CONSOLE
AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB
S5860-48SC
FUNC
S5860-24XB-U
PoE FUNC
MGMT
SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PoE FUNC
S5860-24XB-U
Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=OverLoad
CONSOLE Yellow=100M
Buttons Description
PoE
FUNC
Switch the display mode between PoE mode and switch mode.
The switch will restart after you press the FUNC button for more than ve
seconds and wait for another ten seconds.
S5860-20SQ
Back Panel
Front/Back Panel LEDs
LEDs Status Description
O
Solid Red
The system is powered o.
Blinking Green Initialization is in progress.
1. A system fault occurs.
2. The temperature reaches the upper limit.
STATUS
MGMT
CONSOLE 25G
STATUSPWR1 PWR2 FAN MGMT ID
123 4
21 43 65 87 109 1211 1413 1615 1817 2019 2221 2423 40G Breakout
25
26
S5860-20SQ
40G
FUNC
Status Status Status
Status
FUNC
ID
Link ACT
Status
PWR1
PWR2
1 2 3
4
MGMT
CONSOLE
AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB
S5860-48SC
Grounding Point
Grounding Point
Fan Slots
Fan Slots
Dual Power Supplies
Dual Power Supplies
FAN1 FAN2 PWR1
M1SFANI-F
Status
M1SFANI-F
Status
M1SFANI-F
Status
M1SFANI-F
Status
M1SFANI-F
Status
FAN1 FAN2 FAN3 PWR1 PWR2
Input
Output
Input
Output
S5860-24XB-U
S5860-20SQ
Grounding Point Fan Slots Dual Power Supplies
STATUS/PWR1/PWR2
FAN/MGMT/ID SFP+ SFP28 QSFP+
LEDs Status Description
FAN
PWR1/PWR2
Solid Green The fan works properly.
Solid Red
1. A fan fault occurs.
2. The fan model does not match with the system.
3. Not all fans are in position.
STATUS
Solid Green The system works properly.
Solid Yellow
O
The temperature reaches the threshold value.
The power module is NOT in the position.
Solid Green
Solid Red
The power module works properly.
A power fault occurs.
MGMT
O The MGMT port is NOT connected.
Green The MGMT port is connected.
Blinking Green The MGMT port is transmitting or receiving data.
SFP+
O The SFP+ port is NOT connected.
Solid Green The SFP+ port is connected at 1/10G.
Blinking Green The SFP+ port is transmitting or receiving data at 1/10G.
SFP28
O The SFP28 port is NOT connected.
Solid Green The SFP28 port is connected at 10/25G.
Blinking Green The SFP28 port is transmitting or receiving data at 10/25G.
QSFP+
O The QSFP+ port is NOT connected.
Solid Green The QSFP+ port is connected at 10/40G.
Blinking Green The QSFP+ port is transmitting or receiving data at 10/40G.
O
ID
The locator is controlled by CPLD by default.
Solid Blue The locator is controlled by O&M personnel remotely.
Solid Green The system works properly.
Solid Yellow
1. The temperature reaches the warning threshold.
2.Only 3 fans are in the position.
3.One of the dual powers is not connected with the AC
power cord.
LEDs Status Description
O
Solid Red
The system is powered o.
Blinking Green Initialization is in progress.
1. One of the modules of the system fails.
2. There are less than3 fans.
3. The internal or partial temperature exceeds the
temperature limit,and the switching service resets.
STATUS
S5860-48SC
S5860-48SC
1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F 17F 18F 19F 20F 21F 22F 23F 24F 25F 26F 27F 28F 29F 30F 31F 32F 33F 34F 35F 36F 37F 38F 39F 40F 41F 42F 43F 44F 45F 46F 47F 48F
100G
49F 50F 51F 52F 53F 54F 55F 56F
Status ID
SFP+ QSFP28
Status Status Status
Status
FUNC
ID
Link ACT
Status
PWR1
PWR2
1 2 3
4
MGMT
CONSOLE
AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB AFM-S48SC-FB
STATUS ID
STATUS
ID MGMT
MGMT
O The MGMT port is NOT connected.
Green The MGMT port is connected at 10/100/1000 Mbps.
Blinking Yellow The MGMT port is transmitting or receiving data.
O
ID
The locator is controlled by CPLD by default.
Solid Blue The locator is controlled by O&M personnel remotely.
LEDs Status Description
MGMT
SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PoE FUNC
S5860-24XB-U
Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=OverLoad
CONSOLE Yellow=100M
SFP+
O The SFP+ port is NOT connected.
Solid Green The SFP+ port is connected at 1/10G.
Blinking Green The SFP+ port is transmitting or receiving data at 1/10G.
QSFP28
O The QSFP28 port is NOT connected.
Solid Green The QSFP28 port isconnected at 40/100G.
Blinking Green The QSFP28 port is transmitting or receiving data at 40/100G.
Solid Green The system works properly.
Solid Yellow
Solid Blue
1. The temperature reaches the threshold value.
2. Dierent power modules are used together.
The locator takes eect. It is controlled by O&M personnel
remotely.
LEDs Status Description
O
Solid Red
The system is powered o.
Blinking Green Initialization is in progress.
1. A system fault occurs.
2. The temperature reaches the upper limit.
SYS
S5860-24XB-U
RJ45
PoE (1-24) SFP+
SFP28
MGMT
SYS
PWR FAN
PoE
Solid Green The power module works properly.
Solid Red
1. A power fault occurs.
2. No AC power cable is plugged in.
3. The power model does not match.
O The power module is NOT in the position.
Solid Yellow Indicates the PoE state.
O The MGMT port is NOT connected.
Solid Green The MGMT port is connected at 1000 Mbps.
Blinking Green The MGMT port is transmitting or receiving data at
1000 Mbps.
Solid Yellow The MGMT port is connected at 10/100 Mbps.
Blinking Yellow The MGMT port is transmitting or receiving data at
10/100 Mbps.
Solid Green
Solid Red
The fan works properly.
Solid Green Indicates the switching state.
1. A fan fault occurs.
2. The fan model does not match with the system.
3. Not all fans are in position.
PWR
FAN
PoE
MGMT
LEDs Status Description
O The RJ45 port is NOT connected.
Solid Green The RJ45 port is connected at 1/2.5/5/10G.
Blinking Green The RJ45 port is transmitting or receiving data at
1/2.5/5/10G.
Yellow The RJ45 port is connected at 100 Mbps.
Blinking Yellow The RJ45 port is transmitting or receiving data at 100 Mbps.
O PoE is o.
Solid Green PoE works properly.
Solid Yellow A PoE fault or overload occurs.
RJ45
PoE (1-24)
Altri manuali per S5860 Series
1
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali FS Interruttore
FS
FS Fiberstore S8050-20Q4C Manuale utente
FS
FS S5850-24XMG-U Series Manuale utente
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S3150-8T2FP Manuale utente
FS
FS S3150-8T2FP Manuale utente
FS
FS S5800-48MBQ Manuale utente
FS
FS S3410 Series Manuale utente
FS
FS IES5100-24FS Manuale utente
FS
FS S5850-24S2C-DC Manuale utente
FS
FS TAP Series Manuale utente
FS
FS S3150-8T2FP Manuale utente
FS
FS N Series Manuale utente
FS
FS S5500-48T6SP-R Manuale utente
FS
FS S5900-24S4T2Q Manuale utente
FS
FS Fiberstore S8050-20Q4C Manuale utente
FS
FS N5860 Series Manuale utente
FS
FS IES3100-8TF-P Manuale utente
FS
FS KVM-160217IP Manuale utente
FS
FS S5800-48F4SR-DC Manuale utente
FS
FS IES3110 Series Manuale utente
