Fujitsu PRIMERGY RX1330 M4 Manuale utente

FUJITSU Server PRIMERGY RX1330 M4

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

04/2022

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to ISO 9001 and ISO 27001

To ensure high quality and information security standards while creating documentation, the

quality management system and information security management system of cognitas are

certified in compliance with ISO 9001 and ISO 27001.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de/en/

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

RX1330 M4 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual RX1330 M4

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

RX1330 M4 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 11/2018 Initial release

V 2.0 09/2019 New text Chassis ID Prom Tool, new CPU types

V 3.0 01/2021 Note for memory modules added

V 4.0 06/2021 – Verifying system information backup/restore

–Replacing the CMOS battery

– Replacing the system board

10/2021 – Some structures adepted to new editoral

system

– Information about Infrastructure Manager

(ISM) added

V 5.0 04/2022 – Cable plan updated

– List of released adapters updated

Upgrade and Maintenance Manual RX1330 M4

Content

1 Introduction 17

1.1 Concept and target groups of this manual 17

1.2 Notational conventions 17

2 Before you start 19

2.1 Basic information 19

2.1.1 Proceeding 19

2.1.2 Advanced Thermal Design (ATD) 19

2.1.3 Installing optional components 20

2.1.4 Replacing a defective component 20

2.2 Classification of procedures 21

2.2.1 Assignment of unit categories 21

2.2.2 Customer Replaceable Units (CRU) 21

2.2.3 Upgrade and Repair Units (URU) 22

2.2.4 Field Replaceable Units (FRU) 23

2.3 Average task duration 25

2.4 Tools you need at hand 26

2.5 Documentation overview 26

2.5.1 About availability of manuals 26

2.5.2 List of documents 26

3 Important information 29

3.1 Introduction 29

3.2 Safety instructions 29

3.2.1 Basic safety instructions 29

3.2.2 Before starting up 30

RX1330 M4 Upgrade and Maintenance Manual

3.2.3 Installation and operation 30

3.2.4 Batteries 33

3.2.5 Working with optical disk drives (ODDs) and media 33

3.2.6 Laser information 35

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 35

3.2.8 Transporting the server 37

3.2.9 Installing the server in the rack 38

3.2.10 Other important information 38

3.3 ENERGY STAR 39

3.4 CE conformity 39

3.5 FCC Class A Compliance Statement 40

3.6 Environmental protection 41

4 Basic hardware procedures 43

4.1 Using diagnostic information 43

4.1.1 Proceeding 43

4.1.2 Locating the defective server 43

4.1.3 Determining the error class 44

4.1.4 Locating the defective component 44

4.2 Shutting down the server 45

4.3 Disconnecting the power cord 46

4.4 Getting access to the component 48

4.4.1 Extending the server out of the rack 48

4.4.2 Removing the server from the rack 49

4.4.3 Removing the top cover 51

4.5 Reassembling 52

4.5.1 Installing the top cover 52

4.5.2 Installing the server in the rack 53

4.5.3 Sliding the server into the rack 55

4.6 Connecting the power cord 56

Content

Upgrade and Maintenance Manual RX1330 M4

4.7 Switching on the server 58

4.8 Handling riser modules 59

4.8.1 Removing a riser module 59

4.8.2 Installing a riser module 61

4.9 Handling the air duct 63

4.9.1 Removing the air duct 63

4.9.2 Installing the air duct 64

5 Basic software procedures 65

5.1 Validation 65

5.2 Starting the maintenance task 65

5.2.1 Suspending BitLocker functionality 65

5.2.2 Disabling the boot watchdog 66

5.2.3 Removing backup and optical disk media 68

5.2.4 Verifying and configuring the backup software solution 68

5.2.5 Switching on the ID indicator 68

5.3 Completing the maintenance task 69

5.3.1 Updating or recovering the BIOS and iRMC S5 69

5.3.2 Verifying system information backup or restore 71

5.3.3 Updating expansion card firmware 72

5.3.4 Enabling Option ROM scan 73

5.3.5 Reconfiguring the backup software solution 74

5.3.6 Resetting the boot retry counter 74

5.3.7 Resetting the error status after replacing memory modules or

CPU 76

5.3.7.1 Resetting the error status after replacing memory modules 76

5.3.7.2 Resetting the error status after replacing CPUs 78

5.3.8 Enabling the boot watchdog 80

5.3.9 Enabling replaced components in the BIOS 81

5.3.10 Verifying the memory mode 81

5.3.11 Verifying the system time settings 82

5.3.12 Viewing and clearing the System Event Log (SEL) 83

5.3.13 Updating the NIC configuration file in a Linux and VMware

environment 85

Content

RX1330 M4 Upgrade and Maintenance Manual

5.3.14 Resuming BitLocker functionality 86

5.3.15 Performing a RAID array rebuild 87

5.3.16 Looking for MAC/WWN/GUID and SAS addresses 88

5.3.16.1 Basic information 88

5.3.16.2 Looking for the MAC address of a LAN controller 89

5.3.16.3 Looking for the WWN address of a fibre channel controller 90

5.3.16.4 Looking for the GUID address of an infiniband or Omni-Path

controller 90

5.3.16.5 Looking for SAS addresses of SAS controllers for external

devices 91

5.3.17 Using the Chassis ID Prom Tool 91

5.3.18 Configuring LAN teaming 93

5.3.19 Switching off the ID indicator 95

5.3.20 Performing a fan test 96

6 Power supply unit (PSU) 99

6.1 Safety notes 99

6.2 Basic information 99

6.3 Standard power supply 100

6.3.1 Replacing the standard PSU 100

6.4 Redundant power supply 105

6.4.1 PSU bays 105

6.4.2 Installing a hot-plug PSU 105

6.4.3 Removing a hot-plug PSU 108

6.4.4 Replacing a hot-plug PSU 112

6.4.5 Replacing the power distribution board 114

6.5 Fujitsu battery unit (FJBU) 124

6.5.1 Installing an FJBU 124

6.5.2 Removing an FJBU 125

6.5.3 Replacing an FJBU 126

6.6 Converting a standard power supply to a redundant power

supply 127

Content

Upgrade and Maintenance Manual RX1330 M4

Altri manuali per PRIMERGY RX1330 M4

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuale utente

Fujitsu

Fujitsu PRIMERGY BX600 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX600 S4 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M5000 Guida all'installazione

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M8000 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX800 S2 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX300 S8 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX900 S1 Manuale utente

Fujitsu

Fujitsu 1FINITY L100 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manuale utente

Fujitsu

Fujitsu primequest 2400E2 Guida

Fujitsu

Fujitsu PRIMERGY RX300 S8 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX600 S3 Manuale del proprietario

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuale utente

Fujitsu

Fujitsu PRIMERGY T850 Guida utente

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuale di istruzioni

Fujitsu

Fujitsu PRIMERGY TX200 S7 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2530 M6 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente