Fujitsu PRIMERGY TX100 S2 Manuale del proprietario

Service Supplement - English

PRIMERGY TX100 S2 Server

Service Supplement

Edition July 2010

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX100 S2 Service Supplement

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety notes and other important information" and

ensure these safety notes are understood before using the product. Keep this

manual and the manual "Safety notes and other important information" in a safe

place for easy reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Service Supplement TX100 S2

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

TX100 S2 Service Supplement

Only for the Japanese market:

I Although described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

TX100 S2 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 12

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 15

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 23

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.1.1 Opening and closing the side cover . . . . . . . . . . . . . . . 23

4.1.1.1 Removing the side cover . . . . . . . . . . . . . . . . . . . 23

4.1.1.2 Closing the side cover . . . . . . . . . . . . . . . . . . . . 24

4.1.2 Opening or closing the hard disk drive cage . . . . . . . . . . . 25

4.1.2.1 Opening the HDD cage . . . . . . . . . . . . . . . . . . . 25

4.1.2.2 Closing the HDD cage . . . . . . . . . . . . . . . . . . . . 27

4.1.3 Opening and closing the front bezel . . . . . . . . . . . . . . . 28

4.1.3.1 Removing the front bezel . . . . . . . . . . . . . . . . . . . 28

4.1.3.2 Installing the front bezel . . . . . . . . . . . . . . . . . . . 31

4.1.4 Removing or installing the air duct . . . . . . . . . . . . . . . . 33

4.1.4.1 Removing the air duct . . . . . . . . . . . . . . . . . . . . 33

4.1.4.2 Installing the air duct . . . . . . . . . . . . . . . . . . . . . 37

4.1.5 Replacing accessible drives . . . . . . . . . . . . . . . . . . . 39

4.1.5.1 Removing accessible drives . . . . . . . . . . . . . . . . . 39

4.1.5.2 Installing accessible drives . . . . . . . . . . . . . . . . . . 40

4.1.6 Replacing dummy covers . . . . . . . . . . . . . . . . . . . . 41

4.1.6.1 Removing a dummy cover . . . . . . . . . . . . . . . . . . 41

4.1.6.2 Installing dummy covers . . . . . . . . . . . . . . . . . . . 43

4.2 Replacing the front panel cable . . . . . . . . . . . . . . . . 44

4.2.1 Removing the front panel cable . . . . . . . . . . . . . . . . . 44

4.2.2 Installing the front panel cable . . . . . . . . . . . . . . . . . . 48

Service Supplement TX100 S2

Contents

4.3 Replacing the front USB module . . . . . . . . . . . . . . . . 52

4.3.1 Removing the front USB cable . . . . . . . . . . . . . . . . . . 52

4.3.2 Installing the front USB module . . . . . . . . . . . . . . . . . . 55

4.4 Replacing the power supply unit . . . . . . . . . . . . . . . . 57

4.5 Replacing hard disk drives . . . . . . . . . . . . . . . . . . . 67

4.6 Replacing fans . . . . . . . . . . . . . . . . . . . . . . . . . . 72

4.6.1 Replacing the front fan module (system fan 1) . . . . . . . . . . 72

4.6.2 Replacing the rear fan module (system fan 2) . . . . . . . . . . 80

4.7 Replacing the processor . . . . . . . . . . . . . . . . . . . . 85

4.7.1 Removing the processor heat sink . . . . . . . . . . . . . . . . 85

4.7.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . . 88

4.7.3 Installing the processor heat sink . . . . . . . . . . . . . . . . . 94

4.8 Replacing the system board . . . . . . . . . . . . . . . . . . 96

4.9 Replacing the Trusted Platform Module (TPM) . . . . . . . 104

4.10 Replacing the USB Flash Module (UFM) . . . . . . . . . . . 109

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

TX100 S2 Service Supplement 9

1 Introduction

The PRIMERGY TX100 S2 is the perfect server system for small and medium

enterprises looking to centralize their IT infrastructure, and offers a great price-

performance ratio. Moreover, the TX100 S2 is incredibly silent making it an

excellent choice for any office environment. With its revolutionary zero Watt

functionality in off-mode and an 88% efficient power supply unit, the TX100 S2

minimizes costs and the environmental impact. The use of data security

features such as ECC memory and optional RAID 5/6 ensures around-the-clock

reliability. Finally, the TX100 S2 offers a choice of Intel processors suited to the

needs of SMEs.

Benefits

– With a choice of processors up to Intel Xeon processors 3400 series, and

budget options to choose from, the PRIMERGY TX100 S2 offers an

excellent price-performance ratio

– Zero Watt power consumption in off mode and power supply unit (PSU) with

88% energy efficiency: Benefit from Fujitsu’s pioneering experience in

Green IT - save money and minimize environmental impact.

– Low noise levels: Effective hardware air flow design ensures a silent system

for an ergonomic working environment.

– Server reliability and security thanks to the use of components such as

Intel 3420 server chipset, ECC memory, optional Trusted Platform Module

(TPM) and optional SATA RAID 5/6

– Flexibility: Available with two different base units with a maximum of either 2

or 4 hard disks.

1.1 Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

10 Service Supplement TX100 S2

Introduction

1.2 Documentation overview

Service DVD

Service partners of Fujitsu Technology Solutions can order a PRIMERGY

Service DVD (U15000-C289) at the following internet address:

https://partners.ts.fujitsu.com/com/service/general/serviceshop/Pages/default.aspx

The DVD contains the following manuals in pdf format:

– "Safety notes and other important information" manual

– "PRIMERGY TX100 S2 Server Operating Manual"

– "PRIMERGY TX100 S2 Server Options Guide"

– "System Board D2779 for PRIMERGY TX100 S2 Technical Manual"

– "PRIMERGY TX100 S2 Server Service Supplement"

– "D2779 BIOS Setup Utility for PRIMERGY TX100 S2" manual

Information/procedure Manual

Detailed safety notes "Safety notes and other

important information"

manual

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External connectors

– Operation

– Configuration of the server

Troubleshooting

Installation / removal or replacing of

CSS components:

– Hard disk drives

– Memory modules

– System fans

– Expansion cards

Table 1: Overview of the documentation TX100 S2

Altri manuali per PRIMERGY TX100 S2

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu PRIMERGY RX200 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX150 S5 Manuale utente

Fujitsu

Fujitsu Primergy TX300 S4 Guida

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX200 S5 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu CELVIN NAS QE807 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX120 S3p Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Istruzioni per il montaggio

Fujitsu

Fujitsu PRIMERGY T850 Guida utente

Fujitsu

Fujitsu SPARC Enterprise T5120 Guida all'installazione

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuale di servizio

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Istruzioni per l'uso e l'installazione

Fujitsu

Fujitsu PRIMERGY BX900 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2560 M2 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX922 S2 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX620 S5 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX100 S2 Manuale utente

Fujitsu

Fujitsu PRIMEPOWER 900 Manuale utente

Fujitsu

Fujitsu Primergy RX100 S3 Manuale del proprietario

Fujitsu

Fujitsu PRIMERGY RX100 S8 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente