General XL1 Manuale utente

INSTRUCTION MANUAL

XL1 Multi-line Laser

Please read this instruction manual before operating this product.

Please store this instruction manual in the carry case for future reference.

CAUTION: Class 2 Laser Product

Do not stare directly into the laser beam from apertures.

Do not disassemble the instrument or attempt to perform any internal servicing

as this will void your warranty. No user serviceable parts included.

Only approved and authorised service technicians can carry out warranty repairs.

SAFETY

Carry case

Laser glasses

Batteries

Laser target Tripod spacer

General XL1

Please ensure the following items are included with your laser.

If anything is missing please contact your retailer.

ITEM CHECKLIST

INCHES CM

Adjustable support legs 360° protractor base

Carry strap

Vertical laser ports (x2)

PRODUCT OVERVIEW

Horizontal laser ports (x1)

Control panel and bubble vial

Power / locking switch

CONTROL PANEL

Bubble vial

Horizontal lineVertical lines

Pulse mode

MODE

DETECTOR CONTROL PANEL*

Sound on / off

Laser sensor

Power indicator

Coarse / fine mode indicator

Coarse / fine mode

Bubble vial

*The detector is an additional accessory which can be purchased from your retailer.

On/off switch

Direction arrows

USING YOUR LASER

Setting Up

Power Supply

Operation

‣Select a place as close as practical to the work site.

Ensure the location is clear of traffic.

‣Place the laser on a level surface such as a bench or mount.

‣Level the unit by eye using the bubble vial as a guide.

The XL1 is powered by three AA alkaline batteries.

‣Once the unit is approximately level, turn the power switch to

“on” position. Self levelling will commence and the horizontal

beam will appear.

‣If the unit is outside the self levelling range the unit will not

level and the beam will flash repeatedly.

‣Press the Vand Hbutton on the control panel to cycle

through the active beams.

Using Your Detector*

‣Press the pulse button on the control panel on top of the laser to

enter into pulse mode.

‣Switch the detector on and move it into the path of the laser beam.

‣Hold the detector upright for horizontal beams. Rotate the detector 90°

for vertical beams. The direction arrows will indicate the position of the

laser beam. The centre LED will indicate alignment with the beam.

MODE

*The detector is an additional accessory which can be purchased from your retailer.

CARE AND MAINTENANCE

‣Reflective surfaces such as glass may reflect the beam, causing

two beams to strike the detector at the same time. This may

create inaccurate reference points.

‣This is a precision instrument and should always be transported

within the carry case provided.

‣Always turn the on/off lock to “off” when transporting the unit.

‣Whenever possible, store the instrument in a dry, shady location.

‣The XL1 should be calibrated every 6 months, if ongoing

accurate levelling is required or an impact has occurred.

‣The operator should check the XL1 for accuracy before

precision levelling is attempted.

‣Clean the instrument with a dry, soft cloth after use in dusty, damp

or wet conditions before storing.

‣Smudges and fingerprints may be removed with a damp tissue

or a soft, lint-free cloth.

WARRANTY

The General XL1 comes with a 3 year manufacturers warranty.

Our goods come with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for a major failure

and for compensation for any other reasonably foreseeable loss or damage. You

are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major failure.

Separate to the above Australia Consumer Law, Spot-on oers a global warranty.

Customer Support

To assist you with any queries or technical questions please contact the

customer support line: 1300 658 338

30 Day Free Service

If your laser is out of calibration within the rst 30 days of purchase you

are entitled to a free calibration adjustment. For more information please

contact your retailer or Spot-on.

Altri manuali per XL1

Indice

Altri manuali General Strumento di misura

General

General TS06 Manuale utente

General

General 50-EB-3 Manuale elenco delle parti

General

General MMD900 Manuale utente

General

General DLAF930S Manuale utente

General

General CT6235B Manuale utente

General

General DT4208SD Manuale utente

General

General UV254SD Manuale utente

General

General MP905 Manuale utente

General

General DAMP60 Manuale utente

General

General MMD8P Manuale utente

General

General UV512C Manuale utente

General

General DTH04 Manuale utente

General

General HWA4214SD Manuale utente

General

General MM70 Manuale utente

General

General PTH8707 Manuale utente

General

General TOOLSMART TS02 Manuale utente

General

General MM1E Manuale utente

General

General PCT2236B Manuale utente

General

General EMHT40 Manuale utente

General

General DLM204 Manuale utente

General

General PalmScope DCS950 Manuale utente

General

General DSM8925 Manuale utente

General

General VOC08 Istruzioni per il montaggio

General

General DSM8930 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente