H3C SecPath DC2400 Manuale utente
H3C SecPath DC2400 Power Module
User Manual
New H3C Technologies Co., Ltd.
http://www.h3c.com.hk
Document version: 6PW101-20170414
Copyright © 2016-2017, New H3C Technologies Co., Ltd.
and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form
or by any means without prior written consent of New H3C
Technologies Co., Ltd.
Trademarks
H3C, , H3CS, H3CIE, H3CNE, Aolynk, ,
H3Care, , IRF, NetPilot, Netflow, SecEngine, SecPath,
SecCenter, SecBlade, Comware, ITCMM and HUASAN are
trademarks of New H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the
property of their respective owners
Notice
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to
ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of
any kind, express or implied.
Environmental protection
This product has been designed to comply with the environmental
protection requirements. The storage, use, and disposal of this
product must meet the applicable national laws and regulations.
Obtaining documentation
To access the most up-to-date H3C product documentation, go to the
H3C website at http://www.h3c.com.hk
To obtain information about installation, configuration, and
maintenance, click http://www.h3c.com.hk/Technical_Documents
To obtain software version information such as release notes,
click http://www.h3c.com.hk/Software_Download
Technical support
http://www.h3c.com.hk
Documentation feedback
You can e-mail your comments about product documentation to
We appreciate your comments.
i
Contents
Overview ·················································· 1
Front panel ···································································· 2
LEDs············································································ 2
Technical specifications ··················································· 4
Power module configuration·············································· 5
Installing and removing the power module······· 6
Installing the power module··············································· 6
Installing the power module ·········································· 7
Connecting the power cord··········································10
Removing the power module············································11
Removing the power cord············································12
Removing the power module········································12
1
Overview
The DC2400 DC-input and DC-output power module provides a
maximum output of 2400 W. The available model is NSQM1DC2400.
It has the following features:
•It has protection against undervoltage input, overvoltage input,
overvoltage output, output short circuit, overcurrent output, and
overtemperature.
•It is hot swappable. You can install and remove the power
module on an operating device.
•It can operate in N+1 or N+N redundancy. For more information,
see "Power module configuration."
NOTE:
The power module shuts down automatically when its
temperature exceeds the acceptable range. When the
temperature returns to the acceptable range, the power module
restarts automatically.
2
Front panel
Figure 1 Front panel
(1) Captive screw (2) Handle
(3) Power receptacle (4) Power cord screw hole
(5) Power input status LED
(INP OK) (6) Power output status LED
(DC/FLT)
LEDs
The power module has two LEDs.
3
Table 1 LED description
LED Mark Color Description
Power
input
status
LED
INP OK
Green Normal power input.
Off
•No power input.
•Low power input voltage.
The power module has
entered self-protection
mode.
Power
output
status
LED
DC/FLT
Green Normal power output.
Red
•An output exception has
occurred, for example,
output short circuit, output
overcurrent, output
overvoltage, input
undervoltage,
overtemperature, or remote
shutdown. The power
module has entered
self-protection mode.
•No power is being input to
the power module. Other
power modules are
supplying power to the
device.
Orange
The temperature of the power
module exceeds the
acceptable range. The power
module has entered
self-protection mode.
4
NOTE:
A
fte
r
the circuit breaker of the power module is switched off, the
LEDs on the power module will remain on for a while. Make sure
the LEDs are off when you remove the power module.
Technical specifications
Table 2 Technical specifications
Item Specifications
Rated input voltage –48 to –60 VDC
Rated output voltage 12 VDC
Maximum input current 60 A
Maximum output current 200 A at 12 VDC
Maximum output power 2400 W
Dimensions (H × W × D) 41 × 102 × 391 mm (1.61 ×
4.00 × 15.36 in)
Ambient
temperatur
e
Operating
temperature –10°C to +50°C (–14°F to
+122°F)
Storage
temperature –40°C to +85°C (–40°F to
+185°F)
Relative
humidity
Operating
humidity 30% to 95%, non-condensing
Storage humidity 10% to 95%, non-condensing
5
Power module configuration
Follow these guidelines to configure power modules for a device:
•Determine the required number of power modules based on the
actual power consumption, the power module slot number, and
power redundancy design.
•Determine the power module redundancy design based on the
power source conditions.
{When two mains power inputs are provided, you can
configure the power modules in N+N redundancy. N+N must
be not greater than the total number of power module slots.
{When one mains power input is provided, you can configure
the power modules in N+1 or N+N redundancy. N+1 or N+N
must be not greater than the total number of power module
slots.
•For easy usage and maintenance, configure a circuit breaker for
each power input. The rated current of the circuit breaker must
be greater than 80 A.
6
Installing and removing the power
module
CAUTION:
Do not install the DC2400 power module and other types of
power modules on the same device.
The power module slots are either vertically or horizontally oriented,
depending on the device model. The power module installation and
removal procedure is similar for vertical and horizontal power module
slots. The figures in this section are for illustration only.
Installing the power module
To avoid bodily injury and device damage, follow the procedure
in Figure 2 to install the power module.
Indice
Altri manuali H3C Unità di controllo
H3C
H3C PSR650C-12A Manuale utente
H3C
H3C Campus SeerEngine LSXM1SEERBXC2 Manuale utente
H3C
H3C LSWM18CQ Manuale utente
H3C
H3C SIC-4G-LTE-M Istruzioni operative e di manutenzione
H3C
H3C LSQM1CGS2QSA0 Manuale utente
H3C
H3C SecPath NSQ1FAB04B0 Manuale utente
H3C
H3C PSR250-12A Manuale utente
H3C
H3C PSR2400-54A Manuale utente
H3C
H3C SecPath AC2500 Manuale utente
H3C
H3C PSR450-12A Manuale utente
H3C
H3C SecPath M9000-AI NSQM5MBSHA1 Manuale utente
H3C
H3C PSR1600B-12A-B Manuale utente
H3C
H3C S9500E LSR1FW2A1 Manuale utente
H3C
H3C SR6600 SPE-FWM Manuale utente
H3C
H3C LSVM1S9800FAN Manuale utente
H3C
H3C S9500E Series Manuale elenco delle parti
H3C
H3C SecPath NSQ1FAB08D0 Manuale utente
H3C
H3C SecPath M9000-AI NSQM5AIASKA1 Manuale utente
H3C
H3C PSR300-12A Series Manuale utente
H3C
H3C SecPath NSQM2AC1400 Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
