Hirschmann OWL3G Manuale utente

UM Installation OWL3G

Release

1.0

06/2015 Technical Support

https://hirschmann-support.belden.eu.com

User Manual

Installation

OWL3G (Industrial Cellular Router)

Thenamingofcopyrightedtrademarksinthismanual,evenwhennotspeciallyindicated,should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

Manualsandsoftwareare protectedby copyright.All rightsreserved.Thecopying,reproduction,

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

ControlGmbHaccordingtothebestofthecompany'sknowledge.Hirschmannreservestheright

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(http://www.hirschmann.com).

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 1.0 - Installation – 27.07.2015

Contents

UM Installation OWL3G

Release

1.0

06/2015 3

Contents

About this Guide 5

Legend 6

GPL License 7

Safety Instruction 8

1 Router Description 13

2 Contents of Package 15

3 Router Design 17

3.1 Router Versions 18

3.2 Delivery Identification 19

3.3 Basic Dimensions of Router Box 20

3.4 Mechanical Dimensions and Mounting Recommendations 21

3.5 Removing from the DIN rail 24

3.6 Description of the Front Panel 25

3.6.1 Status Indication 26

3.6.2 Power Connector 26

3.6.3 Grounding the device (functional earth) 27

3.6.4 Antenna Connectors 28

3.6.5 SIM Card Reader 29

3.6.6 Ethernet Ports ETH0 & ETH1 29

3.6.7 Reset 31

4FirstUse 33

4.1 Connecting Components before the First Use 34

4.2 Start 36

4.3 Configuration 37

4.3.1 Configuration using a Web Browser 37

5 Technical Parameters 39

5.1 Basic parameters 40

5.2 Technical Parameters of HSPA+ Module 41

Contents

4UM Installation OWL3G

Release

1.0

06/2015

5.3 Technical Parameters of the Processor 42

6 Recommended literature 43

6.1 Available Literature 44

7 Possible problems 45

7.1 Solutions 46

8FAQ 47

9 Customers Support 49

9.1 CE-marking 50

9.2 E marking 51

A Further Support 53

About this Guide

UM Installation OWL3G

Release

1.0

06/2015 5

About this Guide

This document provides technical specifications for the Industrial Cellular

Router and illustrates the hardware installation for a Hirschmann Industrial

Cellular Router. It also helps the developers to validate their application

design using the Industrial Cellular Router.

The information in this publication contains general descriptions or

performance factors which, when applied in an actual situation, do not

always correspond with the described form and may be amended by way of

further development of products. The desired performance factors shall only

be deemed binding if these are expressly agreed on conclusion of the

contract. Please note that some characteristics of the recommended

accessory parts may differ from the appropriate product. This might limit the

possible operating conditions for the entire system.

About this Guide

Legend

UM Installation OWL3G

Release

1.0

06/2015

Legend

The designations used in this manual have the following meanings:

List

Work step

Subheading

Link Cross-reference with link

Note: A note emphasizes an important fact or draws your attention to a dependency.

Courier ASCII representation in the graphical user interface

About this Guide

UM Installation OWL3G

Release

1.0

06/2015

GPL License

Source codes under the GPL license are available free of charge. Send an

email request to:

[email protected]

About this Guide

Safety Instruction

UM Installation OWL3G

Release

1.0

06/2015

Safety Instruction

General safety instructions

You operate this device with electricity. The safe operation of the device

dependsonproperhandlingduringtransportation,storageandassembly,

and proper use of operation and maintenance procedures. Improper use

of this device can cause injury or property damage.

Read this documentation, safety instructions and warnings before

connecting any cables.

Never start an operation with damaged components.

The device does not contain any service components. If the device is

not functioning correctly, or if it is damaged, turn off the power supply

and return the device to Hirschmann for inspection.

Qualification requirements for personnel

Allowqualified personnel towork onthe device whohave thefollowing

characteristics:

Properly trained personnel who have practical knowledge and

experience. This is the prerequisite for grounding and labeling

circuits, devices, and systems in accordance with current

technology safety standards.

Qualified personnel are aware of the dangers that exist in their

work.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all the data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

About this Guide

UM Installation OWL3G

Release

1.0

06/2015

Safety Instruction

Qualified personnel are familiar with appropriate measures against

thesehazards inorder to reducethe risk for themselves andothers.

Qualified personnel receive training on a regular basis.

Intended usage

Use the product only for the application cases described in the

Hirschmann product information, including this manual.

Operate the product according to the technical parameters. See

chapter 6 for details.

Connect components which are suitable for the requirements of the

specific application case to the product.

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

Working voltage

Connect only a working voltage that corresponds to the type plate of

your device.

Make sure the following requirements are met every time you connect

the electrical conductors:

The power supply conforms to overvoltage category I or II.

The power supply has an easily accessible disconnecting device

(such as a switch or a plug) which is clearly identified. So in case

of an emergency, it is clear which disconnecting device belongs to

which power supply cable.

The electrical wires are voltage-free.

The power supply is Class 2 compliant.

The working voltage inputs are designed for operation with safety

extra-low voltage. Connect only SELV circuits with voltage

restrictions in line with IEC/EN 60950-1 to the working voltage

connections.

About this Guide

Safety Instruction

UM Installation OWL3G

Release

1.0

06/2015

The wire diameter of the power supply cable is at least 1 mm²

(North America: AWG16) on the working voltage input.

The wire diameter of the ground conductor is at least 1 mm² (North

America: AWG16).

The power supply cables used are permitted for the temperature

range required by the application case.

The power cords are suitable for ambient air temperatures of at

least 167 °F (75 °C). The power cord wires are made of copper.

Switch on the operating voltage for the device only when the following

requirements are fulfilled:

The housing is closed

The terminal block is wired correctly

The terminal block for the operating supply is connected

Installation site requirements

Verify that there is at least 4 in (10 cm) of space above and below the

device.

Verify that there is at least 0.8 in (2 cm) of space on the right and left

sides of the device.

Housing

The router cannot be opened.

Never insert pointed objects (narrow screwdrivers, wires, etc.) into the

device or into the connection terminals for electric conductors. Do not

touch the connection terminals.

Altri manuali per OWL3G

Indice

Altri manuali Hirschmann Router di rete

Hirschmann

Hirschmann OCTOPUS OS3 Manuale utente

Hirschmann

Hirschmann MACH104-16TX-PoEP+2X Series Manuale utente

Hirschmann

Hirschmann MICE MS20-0800 Series Manuale utente

Hirschmann

Hirschmann OWL3G Manuale utente

Hirschmann

Hirschmann SPIDER 3TX-TAP Manuale

Hirschmann

Hirschmann RSB20-0800T1T1 Manuale utente

Hirschmann

Hirschmann PowerMICE Manuale utente

Hirschmann

Hirschmann MICE MS20-1600 Series Manuale utente

Hirschmann

Hirschmann RS40 series Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann MACH 4002 Family Manuale utente

Hirschmann

Hirschmann EAGLE30-0402 series Manuale utente

Hirschmann

Hirschmann MACH104-20TX-FR Series Manuale utente

Hirschmann

Hirschmann RS2-5TX/FX Manuale

Hirschmann

Hirschmann RS2-FX-LH/FX-LH Manuale

Hirschmann

Hirschmann HiSecOS EAGLE20 Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann RS30-...U Series Manuale utente

Hirschmann

Hirschmann MACH 1020 Manuale utente

Hirschmann

Hirschmann RSR20-0900 Manuale utente

Hirschmann

Hirschmann MACH 4000 Series Manuale utente

Hirschmann

Hirschmann HiSecOS EAGLE20 Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann MACH 1020 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza