HP Cluster Platform Hardware Kits v2010 Manuale utente
HP Cluster Platform
Cisco SFS 7012D InfiniBand Interconnect
Cable Management Brackets Installation
Guide
HP Part Number: 5992-0556
Published: May 2007
©Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Printed in the U.S.A.
Table of Contents
1 Preparing for Installation................................................................................................9
1.1 Audience...........................................................................................................................................9
1.2 Documentation Resources.................................................................................................................9
1.3 Kit Description..................................................................................................................................9
1.4 Kit Contents.......................................................................................................................................9
1.5 Required Resources.........................................................................................................................10
2 Installing the Cable Management Brackets...............................................................13
2.1 Cable Routing Options....................................................................................................................14
2.2 Removing the Cisco SFS 7012D InfiniBand Interconnect for Service.............................................14
Table of Contents 3
4
List of Figures
1-1 Cable Management Brackets.........................................................................................................10
2-1 Installing the Cable Management Brackets...................................................................................13
2-2 Cable Routing Options..................................................................................................................14
5
6
List of Tables
1-1 Fasteners........................................................................................................................................10
7
8
1 Preparing for Installation
1.1 Audience
This guide is intended for HP service representatives and other persons trained to install hardware
options in HP 10000 series racks. Such persons are expected to understand the hazards of working
in this environment and to take suitable precautions to minimize danger to themselves and
others.
1.2 Documentation Resources
You can download the documentation for components referenced in this installation guide from
the following locations:
HP 10K Series Rack (Documentation
option):
http://h18004.www1.hp.com/products/servers/proliantstorage/racks
HP Cluster Platform: http://www.hp.com/techservers/clusters/xc_clusters.html
Cisco SFS 70xxD Series InfiniBand
Interconnect Read This First:
Documentation Roadmap
http://docs.hp.com/en/AC-CIBRM-1A/AC-CIBRM-1A.pdf
1.3 Kit Description
The cable management brackets described in this manual are designed to align and support the
InfiniBand cables that lead from an HP Cluster Platform Cisco SFS 7012D InfiniBand Interconnect
to the PCI interface cards installed in each server (node). The brackets provide strain relief for
the ports and cables and ensures a good connection. It also ensures the correct bend radius for
the cables and provides the necessary channels to route the cables and cable management.
1.4 Kit Contents
The kit contains the following components:
• The cable management brackets shown in Figure 1-1 “Cable Management Brackets”.
1.1 Audience 9
Figure 1-1 Cable Management Brackets
1
2
3
The following list corresponds to the callouts shown in Figure 1-1.
1. Cable management bracket – right side
2. Cable management bracket – left side
3. Right side cable management bracket top and side views (left side cable management
bracket opposite).
• The fasteners that are specified in Table 1-1.
Table 1-1 Fasteners
DescriptionTorqueFormatSizeQty.
Cage nut for M6 x 16mm screw.N/ASquare nutM6 cage nuts4
Machine screw, Phillips head. For use with the cage
nut.
30 in/lbPhillips
(Posidrive)
M6 x 16mm
screws
4
• Packaging and documentation.
To prevent screws from becoming loose because of vibration, HP recommends that you use an
adjustable torque driver set to the torque specifications given in Table 1-1. Contact your HP sales
representative if any parts are missing.
1.5 Required Resources
To install the kit, you require the following resources:
• Tools:
— Screwdriver, #2 (medium) Phillips.
— Cage-nut insertion tool (shipped with the rack) or a flat-bladed screwdriver.
— Marker pen or masking tape.
• Resources: A sample cable of the type used by the system interconnect.
• Environment:
10 Preparing for Installation
Altri manuali per Cluster Platform Hardware Kits v2010
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali HP Server
HP
HP D7171A - NetServer - LPr Manuale utente
HP
HP ProLiant DL160 Gen8 Manuale utente
HP
HP ProLiant ML310e Manuale utente
HP
HP ProLiant ML110 G5 Istruzioni utente
HP
HP DL320 - ProLiant - G3 Scheda tecnica
HP
HP A4500A - VMEbus Single Board Computer 744... Manuale del proprietario
HP
HP ProLiant DL180 G Manuale
HP
HP DL120 - ProLiant - G5 Istruzioni utente
HP
HP ProLiant BL420c Manuale utente
HP
HP T5135 - Compaq Thin Client Manuale di riferimento
HP
HP T5720 - Compaq Thin Client Manuale
HP
HP ProLiant DL G6 Manuale utente
HP
HP ProLiant BL685c G7 Manuale
HP
HP cc2300 Manuale
HP
HP 3020 Manuale di istruzioni
HP
HP ProLiant ML100 Series Manuale utente
HP
HP ProLiant DL585 Manuale utente
HP
HP A4500A - VMEbus Single Board Computer 744... Manuale utente
HP
HP ProLiant ML115 G5 Guida rapida
HP
HP ProLiant DL20 Gen10 Plus Manuale
