HP Integrity rx2660 Manuale utente
RX2660BOOT DISK ENTRY
Effective:
12/18/18
Revision:
A
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 1 of 11
Adding a Boot Disk Entry to an
HP Integrity rx2660
Necessary Items
•Terminal Emulator application (e.g., PuTTY).
•Hard drive to be mounted.
Overview
In order to boot an rx2660 to a “new” disk, it is necessary to add an entry to the list of devices the rx2660 will try
to boot from (i.e., add a boot entry).
•Connect to the Management Processor (MP).
•Power on the rx2660.
•From the MP, connect to the Console Terminal (CO) and watch the Power On Self Test (POST) and early
boot.
•When the Extensible Firmware Interface (EFI) Menu appears, go to Add Boot Option and add the Boot
Option for the disk.
•Still in the EFI Menu, go to Change Boot Order and move your disk to the top of the list.
•Boot from the disk.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 2 of 11
Details
In this example, a network connection is made to the Management Processor PDQVCA, which is in an rx2660
that plays the role of PDQVSA in the PDQ system.
1. With the rx2660 initially powered OFF (but still plugged in), insert the new hard drive into an available
slot.
2. Launch a PuTTY session and select either the Telnet or SSH radio button.
3. Connect to the MP and enter the Command Menu (CM). From any running workstation.
Admin's password:
– OR –
Admin's password:
NOTE: When using SSH, nothing appears in response to keystrokes, not even dots or asterisks.
Authentication successful.
Hewlett-Packard Integrity Integrated Lights-Out 2
(c) Copyright Hewlett-Packard Company 1999-2011. All Rights Reserved.
MP Host Name: pdqvca
Revision F.02.26
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
[pdqvca] MP> CM
4. Power up the main part of the rx2660.
[pdqvca] MP:CM> pc -on
PC -on
System will be powered on.
Confirm? (Y/[N]): y
y
-> System is being powered on.
-> Command successful.
[pdqvca] MP:CM>
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 3 of 11
5. Return to the Main Menu (<Ctrl-b>) and go to the Console (CO) to monitor the early boot. This may take
a little while.
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
[pdqvca] MP> co
[Use Ctrl-B or ESC-( to return to MP main menu.]
- - - - - - - - - - Prior Console Output - - - - - - - - - -
* POST-MISERnet startup at 21-NOV-2018 10:45:56.58 *
*******************************************************************
SYSTEM job terminated at NOVEMBER 21, 2018 10:45 AM
Accounting information:
Buffered I/O count: 9029 Peak working set size: 9824
Direct I/O count: 3561 Peak virtual size: 250112
Page faults: 22792 Mounted volumes: 0
Charged CPU time: 0 00:00:02.49 Elapsed time: 0 00:00:31.53
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
***********************************************************
* ROM Version : 04.32
* ROM Date : 05/21/2013
* BMC Version : 05.26
***********************************************************
0 0 0x0015B2 0x0000000018719204 boot time event
…
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 4 of 11
6. When the EFI Boot Manager Menu appears, press the Down arrow key to move the cursor to Boot
Configuration, and then press <Enter>. This must be done quickly as there is about fifteen seconds to
respond.
NOTE: If more than one bootable disk is inserted, then multiple entries will appear instead of the one (two-line)
entry seen in this example. The first entry will be for the bootable disk in the lowest-numbered slot.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 5 of 11
7. In the dialog box, navigate to Add Boot Entry and press <Enter>. A message will display while the
machine searches for a bootable device (this should take less than thirty seconds).
8. Navigate to the proper device (typically the top entry) and press <Enter>.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 6 of 11
9. There is no option on this step, you must select EFI. Press <Enter> again and wait for the screen to
refresh.
10. Navigate to the VMS line and press <Enter>.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 7 of 11
11. Navigate to the line that reads VMS_LOADER.EFI and press <Enter>.
NOTE: It may be necessary to move the cursor past the end of the page.
12. Enter a description for the hard drive (e.g., PDQVSA).
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 8 of 11
13. At the next prompt, leave the Load Option blank and press <Enter>. Type <y> at the Save changes to
NVRAM? prompt.
14. When the screen refreshes, navigate to Edit OS Boot Order and press <Enter>.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 9 of 11
15. Highlight PDQVSA and press <Enter>, the word will turn yellow. Press the Up arrow until PDQVSA is the
topmost entry. Press <Enter> again to lock it into its new position.
16. Press <Enter> and the color will change back.
17. Press <Esc> twice to return to the Boot Menu. The new drive will now display at the top of the list.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 10 of 11
18. Press <Enter>, this will begin rebooting the machine.
19. After the machine has rebooted, press <Ctrl-b> to return to the Main Menu.
Altri manuali per Integrity rx2660
6
Indice
Altri manuali HP Server
HP
HP ProLiant DL20 Gen10 Plus Manuale
HP
HP Disk Carrier Blade for bh3710 Manuale utente
HP
HP Cloudline CL2100 G3 806R Istruzioni operative
HP
HP D7171A - NetServer - LPr Manuale utente
HP
HP D7171A - NetServer - LPr Manuale utente
HP
HP D7171A - NetServer - LPr Manuale utente
HP
HP AlphaServer ES47 Manuale di servizio
HP
HP DL360 - ProLiant - Photon Manuale utente
HP
HP ProLiant DL320e Gen8 v2 Manuale
HP
HP P4535A - Web Cache Server Appliance Manuale utente
HP
HP DL320 - ProLiant - G3 Istruzioni utente
HP
HP ProLiant DL180 Gen9 Manuale utente
HP
HP T5725 - Compaq Thin Client Manuale di servizio
HP
HP ML570 - ProLiant - G2 Istruzioni operative e di sicurezza
HP
HP DW017B - StorageWorks Ultrium 448 Tape Drive Manuale di istruzioni
HP
HP ProLiant WS460c Gen8 Manuale utente
HP
HP Apollo 4200 Gen9 Manuale utente
HP
HP NetServer AA 4000 Manuale utente
HP
HP ProLiant DL160 G5P Manuale utente
HP
HP BL680c - ProLiant - G5 Manuale utente
