HPE ProLiant DL580 Gen9 Istruzioni per il montaggio
MF877-00 Page 1
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HPE ProLiant DL580 Gen9
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by
Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment
(WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
9
Batteries
All types including standard alkaline and lithium
coin or button style batteries
2
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Depending on Power Supply model
2
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
MF877-00 Page 2
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Item Description
Notes
Quantity
of items
included
in product
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx Driver
T15
Phillips screw driver
#2
Flat Head Screw driver
Medium
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. System Battery - Remove the top cover and locate the standup card in back pci card slot bay nex to the chassis wall.
Remove the board by pulling the front CPU drawer out ~ 3 inches then unscrewing the PCA's two blue finger screws
located on both ends of the PCA. Use a medium flat head screwdriver or fingers to remove the battery and dispose of
properly.
2. FBWC Battery - Some models, remove the battery from the holder and disconnect cable from PCA and dispose of
properly.
3. Capacitors=>2.5CM - Remove the power supplies from the system. With a #2 Philips screw driver, remove the screws
securing the top cover, then locate the capacitors and pry from the PCB with a medium flat head screw driver and
dispose of properly.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1 –System Battery location.
Attachment 2 –FBWC Battery.
Attachment 3,4, 5 - Capacitor location by model number of supply.
Altri manuali per ProLiant DL580 Gen9
2
Indice
Altri manuali HPE Server
HPE
HPE ProLiant BL460c Gen10 Manuale utente
HPE
HPE ProLiant DL325 Gen10 Manuale utente
HPE
HPE ProLiant ML350 Gen9 Manuale utente
HPE
HPE ProLiant Thin Micro TM200 Manuale utente
HPE
HPE Synergy Series Manuale utente
HPE
HPE ProLiant DL380 Gen10 Manuale utente
HPE
HPE Apollo k6000 Istruzioni per il montaggio
HPE
HPE ProLiant DL180 Gen9 Istruzioni per il montaggio
HPE
HPE ProLiant e910 Istruzioni operative
HPE
HPE Apollo 4520 Gen9 Istruzioni operative e di sicurezza
HPE
HPE ProLiant DL20 Gen10 Manuale utente
HPE
HPE ProLiant DL580 Gen9 Manuale utente
HPE
HPE ProLiant BL460c Gen10 Manuale utente
HPE
HPE ProLiant 4520 Gen9 Istruzioni per il montaggio
HPE
HPE ProLiant DL360 Gen10 Istruzioni per l'installazione
HPE
HPE ProLiant DX380 Gen10 Manuale utente
HPE
HPE Synergy 12000 Istruzioni per il montaggio
HPE
HPE ProLiant ML350 Gen11 Manuale utente
HPE
HPE ProLiant ML350 Gen10 Manuale utente
HPE
HPE ProLiant ML30 Gen10 Manuale
