Huawei ME906s Manuale utente

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").

The product described in this manual may include copyrighted software of Huawei and possible

licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble,

decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such

restrictions are prohibited by applicable laws or such actions are approved by respective copyright

holders.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

LTE is a trade mark of ETSI.

Other trademarks, product, service and company names mentioned may be the property of their

respective owners.

Notice

Some features of the product and its accessories described herein rely on the software installed,

capacities and settings of local network, and therefore may not be activated or may be limited by

local network operators or network service providers.

Thus, the descriptions herein may not exactly match the product or its accessories which you

purchase.

Huawei reserves the right to change or modify any information or specifications contained in this

manual without prior notice and without any liability.

DISCLAIMER

ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE

LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS

MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE

LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF

PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS

OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.

THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY

TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE

USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY

CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and be responsible

to obtain all necessary governmental permits and licenses in order to export, re-export or import the

product mentioned in this manual including the software and technical data therein.

To better understand how we protect your personal information, please see the privacy policy

at http://consumer.huawei.com/privacy-policy.

Contents

Getting to Know the ME906s ........................................................................................................... 1

Assembly ........................................................................................................................................... 3

Installation Guide .............................................................................................................................. 4

Thank you for purchasing HUAWEI ME906s LTE M.2 Module

(hereinafter referred to as the ME906s)

Note:

This manual briefly describes the preparation, the process for PCB Design, Assembly and safety

precautions.

It is recommended to read the manual before using the ME906s.

Getting to Know the ME906s

The ME906s module is 75 pin Gold Finger with a dimension of 42 mm × 30 mm × 2.3mm. It is

applied to the user interface board, and can be used as a wireless terminal in a network

environment.

Antenna interface

It is used to connect and fix an antenna.

Fixing hole

A screw, metal fastener, and nut are used to fix a ME906s module on a development board through

this fixing hole.

Gold Finger

It is connected to the M.2 connector on the development board.

Note:

In certain cases, your development board may be disassembled only by the professionals.

Before you install the ME906s onto the development board, consult the development board

manufacturer or read the user manual of the development board.

Assembly

Through the M.2 connector

ME906s

Installation Guide

Installing and Using an ME906s Module

1. Connect an antenna connector to the antenna interface of an ME906s.

Note:

Insert the antenna connectors vertically into the antenna interfaces of the ME906s.

Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless

performance of the ME906s be reduced or the ME906s cannot work normally.

Ensure that the antenna is placed normally.

2. Fasten the golden finger in the ME906s module to a M.2 connector of a development board to

fix the ME906s module on the development board.

3. Place a metal fastener between the ME906s module and the development board. Put a screw

through the fixing hole of the ME906s, metal fastener, and fixing hole of the development

board in sequence. Then fasten a nut on the screw.

4. Insert a UIM card into the UIM card socket in the development board.

Removing an ME906s Module from a Development Board

1. Remove the UIM card from the UIM card socket.

2. Power off

3. Remove the screw on the ME906s module.

4. Remove the ME906s module from the development board.

5. Remove the antenna from the ME906s module.

Indice

Altri manuali Huawei Unità di controllo

Huawei

Huawei ME909u-521 Istruzioni per l'installazione

Huawei

Huawei APM30H Manuale utente

Huawei

Huawei CX320 Manuale utente

Huawei

Huawei ME909u-523 Guida utente

Huawei

Huawei MU739 Istruzioni per l'installazione

Huawei

Huawei ME909 Series Istruzioni per l'installazione

Huawei

Huawei PDU8000 Series Manuale utente

Huawei

Huawei SmartLogger2000-10-C-JP Manuale utente

Huawei

Huawei ME906V Manuale utente

Huawei

Huawei SMU01C Manuale utente

Huawei

Huawei ME909s Series Istruzioni per l'installazione

Huawei

Huawei UPS5000-E Series Manuale utente

Huawei

Huawei MU203 Manuale utente

Huawei

Huawei ME906E Istruzioni per l'installazione

Huawei

Huawei SmartLogger2000 series Manuale utente

Huawei

Huawei V100R001C00 Manuale utente

Huawei

Huawei ME909u-521 Istruzioni per l'installazione

Huawei

Huawei ME936 Istruzioni per l'installazione

Huawei

Huawei EM770V Manuale utente

Huawei

Huawei EM660C EVDO Manuale utente

Huawei

Huawei EM770U Manuale utente

Huawei

Huawei UPS5000-E Series Manuale utente

Huawei

Huawei ME309-562 Istruzioni per l'installazione

Huawei

Huawei ME909u-523 Istruzioni per l'installazione

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente