ICP DAS USA 7188EN Guida all'installazione

分類/Classification

tDS

tGW

PETL/tET/tPET

DS/PDS/PPDS

tM-752N

I/O Card

VXC Card

VxComm

7188EN

作者/Author

Tammy

日期/Date

2016-01-12

編號/NO.

FAQ-043

Q: How to enable web server for the PDS/7188EN series module?

A: The PDS/7188EN series module contains a built-in web server that allows the settings for the module to

be remotely modified via a web interface. When the web server has been disabled (Web Server = 0), refer

to the following two methods to enable the web server.

Method 1: Enable web server on PDS by using “console port and command”.Follow the procedure

described below:

1. Power off the PDS module.

2. Connect the download-cable (CA0910), between the PDS and COM4 of the development PC.

3. Wire the CA-0910 to PDS, as follows:

Connect the CA-0910.TX with PDS.TxD

Connect the CA-0910.RX with PDS.RxD

Connect the CA-0910.GND with PDS.GND

4. Set the “Init/Normal Switch”on the PDS module to the in “Init”position.

(Or connect the INIT* pin to the GND pin.)

5. Power on the PDS module.

6. Unzip the “7188XW_yyyymmdd.zip” file on the PC. The “7188XW_yyyymmdd.zip”can be obtained

from the ICP DAS web site (http://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/).

7. Open “Notepad”text editor for Windows and type the command: C4 B115200 P0D8 S1, and then save

the file as “7188xw.ini”in the same directory of 7188XW.exe.

8. Execute “7188XW.EXE”and press [Enter] key.

9. Settings configuration command:

The following is an example of a HTTP configuration.

Command

Description

HTTP= 1

Enables the Web Server.

HTTP= 0

Disables the Web Server.

Enable Web Server

C: COM Port of the development PC (e.g., C4)

B: Baud Rate (e.g., B115200)

P: Parity None (e.g., P0)

D: Data Bits (e.g., D8)

S: Stop Bits (e.g., S1)

Method 2: Enable web server on PDS by using “TCP port 10000”.Follow the procedure described below:

1. Ensure that the network settings on the Host PC have been correctly configured and are functioning

normally. Connect both the PDS module and the Host PC to the same sub network or the same

Ethernet Switch, and apply power to the PDS module.

2. Configure the correct network settings for the required PDS module. Refer to PDS Quick Start Guide for

more detailed information.

(http://ftp.icpdas.com/pub/cd/8000cd/napdos/pds/pds-700/document/quick_start/)

3. Download the “Terminal.exe”on your PC, or use other telnet client program. The “Terminal.exe”can

be downloaded from the ICP DAS web site.

(http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/)

4. Double click the “Terminal.exe”to open “Configuration Settings”dialog box.

5. Click the “TCP/IP Port”tab to configure the parameters as follows:

5-1: Type the “IP address of the PDS module”in the “IP Address”field.

5-2: Type the “10000”in the “TCP/IP Port”field.

5-3: Click the “Open COM”button.



6. Select the “Hex/Text”option in the “Display”filed and settings configuration command:

Command

Description

26SAVE=1, HTTP=1

Enables the Web Server and save the configuration to EEPROM.

26SAVE=1, HTTP=0

Disables the Web Server and save the configuration to EEPROM.

7. Type the “26SAVE=1, HTTP=1”string in the “send”field then click the “Send”button.

8. If the response is received, it will be displayed in the received field that means the success.

9. Reboot the PDS module to complete the configuration.







Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ICP DAS USA Unità di controllo

ICP DAS USA

ICP DAS USA tM Series Manuale utente

ICP DAS USA

ICP DAS USA M-7002 Manuale utente

ICP DAS USA

ICP DAS USA ECAT-2016N Manuale utente

ICP DAS USA

ICP DAS USA tZT-P4C4 Manuale utente

ICP DAS USA

ICP DAS USA tET Series Manuale utente

ICP DAS USA

ICP DAS USA PROFIBUS PROFI-2510 Manuale utente

ICP DAS USA

ICP DAS USA MDC-700 Series Manuale utente

ICP DAS USA

ICP DAS USA tM-AD4P2C2 Manuale utente

ICP DAS USA

ICP DAS USA WP-5231 Manuale utente

ICP DAS USA

ICP DAS USA MDC-700 Series Manuale utente

ICP DAS USA

ICP DAS USA GTP-230 Manuale utente

ICP DAS USA

ICP DAS USA I-7188XA Manuale utente

ICP DAS USA

ICP DAS USA tET-P6 Manuale utente

ICP DAS USA

ICP DAS USA M-7067D Manuale utente

ICP DAS USA

ICP DAS USA M-7041 Manuale utente

ICP DAS USA

ICP DAS USA tM-TH8 Manuale utente

ICP DAS USA

ICP DAS USA ET-87P2 Manuale utente

ICP DAS USA

ICP DAS USA SG-785 Manuale utente

ICP DAS USA

ICP DAS USA HRT-711 Manuale utente

ICP DAS USA

ICP DAS USA FR-32R Manuale utente

ICP DAS USA

ICP DAS USA ET-7000 series Manuale utente

ICP DAS USA

ICP DAS USA I-7052D Manuale utente

ICP DAS USA

ICP DAS USA EIP-2000 Series Guida all'installazione

ICP DAS USA

ICP DAS USA PISO-CPM100U-D/T Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente