ICP DAS USA ECAT-2012H Manuale utente

Technical support: servic[email protected] P1

ECAT-2012H Quick Start

v1.0, Oct. 2019

What’s in the box?

1 Connecting the Power and Host PC

Switch on module and connect it to an EtherCAT network

NOTE: Attaching an ESC directly to an office network will result in network

flooding, since the ESC will reflect any frame – especially broadcast frames –

back into the network (broadcast storm).

Verify that LEDs indicator

The package includes the following items:

ECAT-2012H Module x 1

Quick Start x1 (This Document)

1) Connect the Host device to the IN

port on ECAT-2012H module.

2) Connect the PWR+ pin to positive

terminal on a +10 - +30 VDC power

supply, and connect the GND- pin to

the negative terminal.

Red, OK

Green, OK

OUT

+Vs

GND

F.G.

Technical support: servic[email protected] P2

2 Search Modules

ESI file

The latest ESI file (ICPDAS ECAT-2012.xml) can be

downloaded from ICP DAS website at

http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/software/

Install the ESI file

Copy the “ICPDAS ECAT-2012.xml” file to the Master Tools installation folder, as

indicated in the table below.

Software

Default Path

Beckhoff EtherCAT Configuration

C:\EtherCAT Configurator\EtherCAT

Beckhoff TwinCAT 3.X

C:\TwinCAT\3.x\Config\Io\EtherCAT

Beckhoff TwinCAT 2.X

C:\TwinCAT\Io\EtherCAT

Run the EtherCAT Master software (Beckhoff TwinCAT 2.X)

Switch on power and execute the TwinCAT System Manager (Config mode)

1. I/O Devices Right click 

Scan Devices…

2. Click “OK” button

3. Choose the correct network

device which is connected to

ECAT-2012H and click “OK”

button

Technical support: servic[email protected] P3

(Default Settings)

3 Wiring to the Connector

Wiring Tip

Connecting the wire

Removing the wire

Wire Diagrams

Voltage Input (Differential) Voltage Input (Single-ended) Current Input

4. Click “OK” to start scanning

Click “OK” to activate the free run

mode for TwinCAT system

manager

5. In the left-hand window,

ECAT-2012His now shown in the

TwinCAT system Manager

Use the blade of a

flat-head screwdriver to

push the wire clamp, then

hold until step 2 complete.



Insert the

wire



Use the blade of a

flat-head screwdriver to

push the wire clamp, then

hold until step 2 complete.



Remove the

wire



mV/V

Vx+

Vx-

mV/V V

Vx+

AGND

Vx+

Vx-

Technical support: servic[email protected] P4

Wiring the AI0 (Analog Input type default is Differential input)

Verifying the AI Functionality

Related Information

Connect the V0- (Pin01) to

signal positive (-)

Connect the V0+ (Pin02) to

signal positive (+)





(+)

(-)

Stable Signal Source (e.g., Dry Battery)

EtherCAT Series Product Page:

http://www.icpdas.com/root/product/solutions/industrial_communication/fieldb

us/ethercat/ethercat_selection_guide.html

Documentation & Software:

http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/

1. Click “AI0”in the left-hand window.

2. In the right-hand window, check the

voltage value in the “Value” item.

Indice

Altri manuali ICP DAS USA Unità di controllo

ICP DAS USA

ICP DAS USA M-7033 Manuale utente

ICP DAS USA

ICP DAS USA I-8094 Manuale elenco delle parti

ICP DAS USA

ICP DAS USA LP-8 21 Series Manuale utente

ICP DAS USA

ICP DAS USA iWSN-110X Series Manuale utente

ICP DAS USA

ICP DAS USA tM-P3R3 Manuale utente

ICP DAS USA

ICP DAS USA tSG-3781B Manuale utente

ICP DAS USA

ICP DAS USA tSH-700 Series Manuale utente

ICP DAS USA

ICP DAS USA tET-P6 Manuale utente

ICP DAS USA

ICP DAS USA I-7016 Manuale utente

ICP DAS USA

ICP DAS USA GW-7552-M Manuale utente

ICP DAS USA

ICP DAS USA SP-S2-DS Manuale utente

ICP DAS USA

ICP DAS USA tET-P2A2 Manuale utente

ICP DAS USA

ICP DAS USA I-7188XA Manuale utente

ICP DAS USA

ICP DAS USA LP-8 21 Series Istruzioni generali

ICP DAS USA

ICP DAS USA GTM-204M-4G Manuale utente

ICP DAS USA

ICP DAS USA I-8123W Guida all'installazione

ICP DAS USA

ICP DAS USA I-7060D Manuale utente

ICP DAS USA

ICP DAS USA ISN-101 Manuale utente

ICP DAS USA

ICP DAS USA tET Series Manuale utente

ICP DAS USA

ICP DAS USA ZT-2053 Manuale utente

ICP DAS USA

ICP DAS USA PM-3133i Manuale utente

ICP DAS USA

ICP DAS USA M-7069 Manuale utente

ICP DAS USA

ICP DAS USA PM-4324 Series Manuale utente

ICP DAS USA

ICP DAS USA M-7017R Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente