Intermec EasyCoder 4420 Manuale

Altri manuali per EasyCoder 4420

9

Indice

Altri manuali Intermec Accessori per stampanti

Intermec

Intermec PB50 Manuale utente

Intermec

Intermec PA30 Manuale utente

Intermec

Intermec PW50 Manuale utente

Intermec

Intermec EasyCoder PF4ci Manuale utente

Intermec

Intermec EasyCoder PC4 Manuale utente

Intermec

Intermec EasyCoder PD4 Manuale utente

Intermec

Intermec UBI EasyCoder 601 E Guida

Intermec

Intermec 825-192-001 Manuale utente

Intermec

Intermec EasyCoder PD41 Manuale utente

Intermec

Intermec EasyCoder PD4 Manuale utente

Intermec

Intermec 4630 Manuale utente

Intermec

Intermec Font Card Manuale utente

Intermec

Intermec EasyCoder F4 Manuale utente

Intermec

Intermec EasyCoder 3400e Manuale utente

Intermec

Intermec EasyCoder 601XP Manuale utente

Intermec

Intermec PB42 Manuale

Intermec

Intermec EasyCoder 501XP Manuale utente

Intermec

Intermec EasyCoder PF2i Manuale utente

Intermec

Intermec EasyCoder 501 SA Manuale utente

Intermec

Intermec EasyCoder 601XP Manuale utente

Intermec

Intermec EasyCoder PF2i Manuale utente

Intermec

Intermec EasyCoder PF2i Manuale utente

Intermec

Intermec 074788 Series Manuale utente

Intermec

Intermec PB2 Series Manuale

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale

Part No. 070876-001

4420 Hinged Media Cover Instruction Sheet

The following instructions explain how to install a hinged media cover on the Intermec

4420 printer.

Parts Provided:

•Hinged media cover

•Phillips screws (2)

Tools Required:

•Phillips screwdriver

Warning

Electrical equipment can be dangerous! Make sure the printer power switch is turned

off and the AC power cord is disconnected before opening the printer media cover.

Working on live equipment can cause injury or death.

Avertissement

Le matériel électrique peut être dangereux ! Assurez-vous que l’interrupteur

d’alimentation de l’imprimante est éteint et que le cordon d’alimentation est

débranché, avant d’ouvrir le couvercle du support d’imprimante. Travailler sur du

matériel sous-tension peut provoquer des blessures ou la mort.

Installing the Hinged Media Cover

Remove the standard media cover before installing the hinged media cover.

To remove the standard media cover

1. Place the fingers of your right hand under the embossed section of the media cover

(the media cover release), and pull the bottom of the media cover away from the

base of the printer.

4420I002.eps

Feed/Pause

Power/Data

Alert

Empty/Pause

Intermec

Intermec

4420

1

2

3

2. Grasp the front of the media cover with your left hand and lift the front of the media

cover upward to release it from the printer frame.

3. Lift the media cover away from the top of the printer. Discard the media cover.

4. Remove and discard the two outer screws securing the electronics cover to the

printer. Do not remove the center screw.

To install the hinged media cover

1. Fit the media cover over the printer, aligning the pilot holes on the hinges with the

pilot holes on the back cover of the printer.

2. Install the two Phillips screws (included with the hinged media cover) through the

hinges into the back cover. Allow a clearance of at least 41.91 cm (17 in) around the

printer to open and close the media cover.

Note: Adjust the media cover while tightening the screws to ensure that the front

bezel clears the label taken sensor; otherwise, the sensor may break.

Part No. 070876-001

*070876-001*

*070876-001*

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

© 2000 Intermec

All Rights Reserved

Screw

(2 places)

Hinged

cover

Front bezel Label taken

sensor

4420I001.eps