Contents
vii
Connecting to a Twinaxial Network 3-17
Installing the DCS 300 3-17
Configuring the Twinaxial Card 3-17
Connecting to an SDLC Network 3-18
Installing the DCS 300 3-18
Configuring the SDLC Card 3-19
Configuring Advanced SDLC Parameters 3-20
Configuring IP Routes 3-21
Using the Routing Daemon 3-21
Configuring Routing Tables 3-22
Using the Auto Fallback Feature 3-23
Configuring the DCS 300s 3-24
Configuring the Trakker Antares UDP Plus Terminals 3-24
Configuring the WTP Devices 3-24
Saving Your Runtime Configuration 3-25
Connecting to the Intermec RF Network
Chapter Checklist 4-3
Connecting the DCS 300 to the 900 MHz RF Network 4-4
Configuring the RF Card 4-6
Adding an RF Card 4-8
Setting the Time Parameters 4-10
Defining Default Hosts 4-12
Defining the RF Card Devices 4-13
Enabling the RF Card Devices 4-14
Editing an RF Card Device 4-15
Connecting the DCS 300 to the UDP Plus Network 4-17
Configuring a UDP Plus Network 4-18
Adding a UDP Plus Network 4-19
Setting the Time Parameters 4-21
Defining Default Hosts 4-23
Setting Up the UDP Plus Devices 4-24
Enabling the UDP Plus Devices 4-25
Editing a UDP Plus Device 4-27
Determining a UDP Plus Device’s IP Address 4-28
Editing a UDP Plus Device’s IP Address 4-29
4
