JUMO 404304 Series Manuale utente
40430400T90Z000K000
EN/00392602
Pressure and differential pressure transmitters
Operating Instructions
Content
1 Typographical conventions ............................................................................................................. 5
1.1 Warning signs ...................................................................................................................................... 5
1.2 Note signs ............................................................................................................................................ 5
2 General .............................................................................................................................................. 6
2.1 Preface ................................................................................................................................................ 6
2.2 Application ........................................................................................................................................... 7
3 Identifying the device vision ............................................................................................................ 8
3.1 Order details ........................................................................................................................................ 8
4 Mounting .......................................................................................................................................... 10
5 Installation ....................................................................................................................................... 11
5.1 Electrical connection .......................................................................................................................... 11
6 Commissioning ............................................................................................................................... 13
7 Calibration ....................................................................................................................................... 14
8 Setting the limit contacts ............................................................................................................... 15
5
1 Typographical conventions
1.1 Warning signs
1.2 Note signs
Danger
This sign is used when there may be danger to personnel if the instructions
are disregarded or not followed accurately.
Caution
This sign is used when there may be damage to equipment or data if the
instructions are disregarded or not followed accurately.
Note
This sign is used when your special attention is drawn to a remark.
➩Reference
This sign refers to further information in other chapters or sections.
abc1Footnote
Footnotes are notes which refer to certain points in the text.
Footnotes consist of two parts:
Marking in the text and the footnote text.
The marking in the text is arranged as continuous superscript numbers.
✱Action
This sign indicates that an action to be performed is described.
The individual steps are marked by this asterisk.
Example:
✱Remove crosspoint screw
✱Set potentiometer
6
2 General
2.1 Preface
Please read these Operating Instructions before commissioning the instrument.
Keep the instructions in a place which is accessible to all users at all times.
Please assist us to improve these operating instructions, where necessary.
Your suggestions will be welcome.
All the necessary settings are described in this manual. However, if
any difficulties should still arise during commissioning, you are
asked not to carry out any unauthorized manipulations on the unit.
You could endanger your rights under the instrument warranty!
Please contact the nearest subsidiary or the head office in such a
case.
When returning modules, assemblies or components, the
regulations to EN 100 015 “Protection of electrostatically sensitive
components” must be observed. Use only the appropriate ESD
packaging for transport.
Please note that we cannot accept any liability for damage caused
by ESD (electrostatic discharge).
7
2 General
2.2 Application
General note Pressure and differential pressure transmitters Type 404304 are used for mea-
suring very low pressures.
Corresponding to the measuring range, the CuBe diaphragm inside
the instrument is very sensitive.
Do not blow into the pressure connections, as this may
damage or destroy the instrument.
The instrument is suitable for non-corrosive gases only.
The instrument has no Ex approval.
8
3 Identifying the device vision
3.1 Order details
(1) Basic type
404304 Pressure transmitter with inductive measuring system
(2) Basic type extensions
000 none
011 with one limit contacta
012 with two limit contactsa
013 LCD readout, 31/2-digit
014 with one limit contact and LCD readout, 31/2-digita
015 with two limit contacts and LCD readout, 31/2-digita
(3) Nominal input range
396 0 to 10 Paa/b
397 0 to 20 Paa/b
398 0 to 30 Paa/b
399 0 to 40 Paa/b
400 0 to 0.5 mbar
401 0 to 0.6 mbar
402 0 to 1 mbar
403 0 to 1.6 mbar
404 0 to 2.5 mbar
405 0 to 4 mbar
406 0 to 5 mbar
407 0 to 6 mbar
408 0 to 10 mbar
409 0 to 16 mbar
410 0 to 25 mbar
411 0 to 40 mbar
412 0 to 50 mbar
413 0 to 60 mbar
414 0 to 100 mbar
415 0 to 160 mbar
420 950 to 1050 mbar, absolutec
421 900 to 1100 mbar, absolutec
422 800 to 1200 mbar, absolutec
423 800 to 1000 mbar, absolutec
451 0 to 0.25 bar
452 0 to 0.4 bar
453 0 to 0.6 bar
454 0 to 1.0 bar
488 0 to 1.0 bar, absolutec
999 Special measuring range
9
3 Identifying the device vision
(4) Output
402 0 to 20 mA
403 0 to 20 mA, square root
405 4 to 20 mA, 2-wire
406 4 to 20 mA
407 4 to 20 mA, square root
415 0 to 10 V
416 0 to 10 V, square root
451 0 to 20 mA, extended response time
452 0 to 20 mA, square root, extended response time
453 0 to 20 mA, 2-wire, extended response time
454 4 to 20 mA, extended response time
455 4 to 20 mA, square root extended response time
456 0 to 10 V, extended response time
457 0 to 10 V, square root, extended response time
(5) Voltage supply
02 230 V -10 % to +6 % AC, 50 to 60 Hz
05 115 V -10 % to +6 % AC, 50 to 60 Hz
08 24 V -10 % to +6 % AC, 50 to 60 Hz
27 DC 11.5 to 30 V (with 4 to 20 mA 2-wire output)
28 DC 19 to 31 V
(6) Process connection
296 screwed pipe connection 8 mm
298 6.6 × 11 mm dia. (for flexible hoses 6 mm dia.)
anot with 2-wire output (405 or 453), not with DC 11.5 to 30 V (voltage supply 27)
bwith housing 122 mm × 120 mm × 75 mm and automatic zeroing, not with 2-wire output (405 or
453)
cfor barometric pressure measurement (if applicable, state site altitude a.m.s.l)
(1) (2) (3) (4) (5) (6)
Order code /
Order example 404304 / 000 - 414 - 406 - 02 - 298
10
4 Mounting
Fixing ✱Use the lugs to fix the instrument.
The instrument should preferably be fixed vertically (pressure
connections below), since it has been factory-calibrated in this posi-
tion.
This ensures that no condensate from the pressure lines will enter
the measuring system.
Do not install the instrument close to sources of interference (trans-
formers, transmitters, motors) or heat sources.
Shock or vibration will lead to measurement errors.
11
5 Installation
5.1 Electrical connection
Opening the
instrument
✱Unscrew the four slotted screws
✱Remove cover
Connection
When connecting the instrument, please observe the VDE regulati-
ons concerning work with mains supply voltage, as well as the
regulations of the trade insurance associations regarding work on
and with electrical equipment and installations.
Never connect the supply voltage to the output terminals!
For the required supply voltage, see nameplate.
Instruments with DC supply have a reverse polarity protection.
Connection Terminals
Terminal
block
Voltage supply
DC 11.5 to 30 V, 19 to 31V
L -
L +
1
2
Voltage supply
AC 230 V, 115 V, 24 V
N
L 1
1
2
Output
0 to 10 V, 0/4 to 20 mA, 3-wire
-
+
3
4
Altri manuali per 404304 Series
1
Indice
Altri manuali JUMO Trasmettitore
JUMO
JUMO dTRANS p02 Manuale utente
JUMO
JUMO dTRANS T09 DS Manuale utente
JUMO
JUMO dTRANS T01 HART Manuale utente
JUMO
JUMO SIRAS P21 DP Manuale utente
JUMO
JUMO DELOS SI Manuale utente
JUMO
JUMO CTI-750 Manuale utente
JUMO
JUMO B 90.7027.1 Manuale utente
JUMO
JUMO CTI-750 Manuale utente
JUMO
JUMO 907021/10 Manuale utente
JUMO
JUMO 907021/30 Manuale utente
JUMO
JUMO B 707025.0 Manuale utente
JUMO
JUMO dTRANS T05 Manuale utente
JUMO
JUMO dTRANS T03 Series Manuale utente
JUMO
JUMO 40.2005 Manuale utente
JUMO
JUMO dTRANS T07 Guida di riferimento
JUMO
JUMO 404304 Series Manuale utente
JUMO
JUMO dTRANS T08 01 Manuale utente
JUMO
JUMO TAROS S47 P Manuale utente
JUMO
JUMO dTRANS p02 Manuale utente
JUMO
JUMO DELOS SI Manuale utente
