Kichler Lighting Incus Manuale utente
56” Incus™ LED FAN
INSTRUCTION MANUAL
Product images may vary slightly from actual product.
P
r
o
d
TABLE OF CONTENTS
SAFETY RULES.......................................................................... 4
5
5
6
9
12
13
15
TOOLS REQUIRED....................................................................
PACKAGE CONTENTS.............................................................
MOUNTING OPTIONS.............................................................
HANGING THE FAN..................................................................
INSTALLATION OF SAFETY SUPPORT..........................
ELECTRICAL CONNECTIONS.............................................
FINISHING THE INSTALLATION........................................
INSTALLINGTHELEDASSEMBLY............................................. 16
17
18
20
INSTALLING THE WALL TRANSMITTER........................
OPERATION INSTRUCTION .............................................
TROUBLESHOOTING.............................................................
56” Incus™ LED FAN | 3
ATTACHING THE FAN BLADES ........................................ 7
INSTALLING THE BLADE ARM PLATE ......................... 8
4 | KICHLER.COM
SAFETY RULES
1. To reduce the risk of electric shock, insure electricity has been
2. All wiring must be in accordance with the National Electrical Code
and local electrical codes. Electrical installation should be
performed by a qualified licensed electrician.
3. WARNING: To reduce the risk of fire, electric shock, or personal
injury, mount to outlet box marked "acceptable for fan support of
15.8 kg (35 lbs.) or less" and use mounting screws provided with
the outlet box. Most outlet boxes commonly used for the support
of light fixtures are not acceptable for fan support and may need
to be replaced. Due to the complexity of the installation of this fan,
a qualified licensed electrician is strongly recommended.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PERSONAL INJURY, MOUNT FAN TO OUTLET BOX MARKED
"ACCEPTABLE FOR FAN SUPPORT".
4. The outlet box and support structure must be securely mounted
and capable of reliably supporting a minimum of 50 pounds. Use
only CUL Listed outlet boxes marked "FOR FAN SUPPORT".
5. The fan must be mounted with a minimum of 7 feet clearance
from the trailing edge of the blades to the floor.
6. To operate the reverse function on this fan, press the reverse
button while the fan is running.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other items, be
cautious when working around or cleaning the fan.
9. Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be suitable
for most cleaning.
10. After marking electrical connections, spliced conductors should
be turned upward and pushed carefully up into outlet box. The
wires should be spread apart with the grounded conductor and
the equipment-grounding conductor on one side of the outlet
box.
11. Electrical diagrams are reference only. Light kits that are not
packed with the fan must be CUL Listed and marked suitable for
use with the model fan you are installing. Switches must be CUL
General Use Switches. Refer to the Instructions packaged with
the light kits and switches for proper assembly.
WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO
NOT BEND THE BLADE BRACKETS (ALSO REFERRED TO AS
FLANGES) DURING ASSEMBLY OR AFTER INSTALLATION. DO
NOT INSERT OBJECTS IN THE PATH OF THE BLADES.
TOOLS REQUIRED
Philips screw driver
Blade screw driver
11 mm wrench
Step ladder
Wire cutters
PACKAGE CONTENTS
Unpack your fan and check the
contents. You should have the
following items:
a. Fan blades (3)
b. Canopy & Ceiling mounting
bracket
1)
2)
3)
Mounting hardware:
wood screws (2), flat washers (2),
star washers (2), wire nuts (3),
screws (2)
Blade attachment hardware:
Screw (9 + 2 spare)
Fiber washer ( 9 + 2 spare)
Blade arm plate hardware: Screw
(5 + 2 spare) i
j
g
h
a
b
c
d
e
f
c. Ball/downrod assembly
d. Coupling cover
e. Fan motor assembly
f. Blade arm plate
g. 17W LED assembly
h. Receiver
i. Wall Transmitter
j. Part bag contents
1 2 3 4 5
56” Incus™ LED FAN | 5
Safety cable hardware:
wood screw, spring washer,
flat washer
Balance Kit
4)
5
6 | KICHLER.COM
If there isn't an existing UL (cUL for Canadian Installation) listed
mounting box, then read the following instructions. Disconnect the
Secure the outlet box directly to the building structure. Use
appropriate fasteners and building materials. The outlet box and its
support must be able to fully support the moving weight of the fan
(at least 50 lbs). Do not use plastic outlet boxes.
box.
NOTE: If you are installing the ceiling fan on a sloped (vaulted)
ceiling, you may need a longer downrod to maintain proper
clearance between the tip of the blade and the ceiling. A minimum
clearance of 12" is suggested for optimal operation.
NOTE: Depending on the location you have selected for installation,
you may need to purchase and install a "Joist Hanger" for the
support of the outlet box. Make sure the joist hanger you purchase
has been designed for use with ceiling fans. (Fig. 4)
MOUNTING OPTIONS
Fig. 1
Outlet box
Outlet box
Fig. 2
Provide strong
support
Recessed
outlet box Ceiling
mounting
plate
Fig. 3
ANGLED CEILING
MAXIMUM 30° ANGLE
Outlet box
Fig. 4
ATTACHING THE FAN BLADES
Step 1. Insert the blade through the slot on the blade arm plate .
(Fig.1) Secure the blade with three blade screws and fiber washer
provided.
Step 2. Repeat same process for the remaining blades.(Fig.2)
Fig. 1
fiber washer blade screw
56” Incus™ LED FAN | 7
Blades
Fig. 2
Blade arm plate slot
8 | KICHLER.COM
Fig. 4
Fig. 3
INSTALL THE BLADE ARM PLATE
Step 1. Align the 5 holes from the blade arm plate to the fan motor
assembly. Secure it with the 5 blade arm screws provided. (Fig.3) blade
blade arm plate
fan motor
assembly
blade arm plate screw
blade
blade arm plate
fan motor assembly
56” Incus™ LED FAN | 9
HANGING THE FAN
REMEMBER
To properly install your ceiling fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the canopy
by turning the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by
removing (and save one of the two screws. Loosen the remaining screw
by a half turn. (Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box
through the center of the ceiling mounting bracket. (Fig. 6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the
screws and washers included with the outlet box. (Fig.6)
Fig. 6
Hanger bracket
Ceiling
canopy
Canopy
cover
Ceiling
hanger
bracket
Mounting screws (supplied
with electrical box)
UL Listed
electrial
box
120V Wires
Washers
Fig. 5
Step 5. Remove the hanger ball from the downrod assembly by
loosening the set screw, unscrewing and removing the cross
Step 6. Loosen the two set screws and remove the hitch pin and
retaining clip from the coupling on top of the motor assembly. (Fig. 7)
Step 7. Carefully feed the electrical lead wires from the fan up through
the downrod. Thread the downrod into the coupling until the Hitch pin
holes are aligned.
Next, replace the hitch pin and retaining clip. Tighten both set screws.
(Fig. 7)
HANGING THE FAN(continued)
Fig. 7
Downrod
Cross pin
Hanger
ball Set screw
Supply wires
Downrod
Hitch pin
Retaining clip Set screws
Set screws
10 | KICHLER.COM
(Fig. 7)
Indice
Lingue:
Altri manuali Kichler Lighting Fan
Kichler Lighting
Kichler Lighting Renew Premier Manuale utente
Kichler Lighting
Kichler Lighting Renew Select Manuale utente
Kichler Lighting
Kichler Lighting Terna 300215 Manuale utente
Kichler Lighting
Kichler Lighting 300395 Manuale utente
Kichler Lighting
Kichler Lighting Crescent 300325 Manuale utente
Kichler Lighting
Kichler Lighting Richland II Manuale utente
Kichler Lighting
Kichler Lighting ERIS 337060 Manuale utente
Kichler Lighting
Kichler Lighting Tide Weather+ Manuale utente
Kichler Lighting
Kichler Lighting Szeplo 370060 Manuale utente
Kichler Lighting
Kichler Lighting Guardian 330057 Manuale utente
Kichler Lighting
Kichler Lighting 310155 Manuale utente
Kichler Lighting
Kichler Lighting Szeplo II Manuale utente
Kichler Lighting
Kichler Lighting Surrey Climates 60 Manuale utente
Kichler Lighting
Kichler Lighting Todo 330025 Manuale utente
Kichler Lighting
Kichler Lighting Hatteras Bay Patio Manuale utente
Kichler Lighting
Kichler Lighting Jade 300030 Manuale utente
Kichler Lighting
Kichler Lighting Compass 300322 Manuale utente
Kichler Lighting
Kichler Lighting Sterling Manor Manuale utente
Kichler Lighting
Kichler Lighting VASSAR Manuale utente
Kichler Lighting
Kichler Lighting 300457 Manuale utente
