Kobold DTK Manuale utente

Operating Instructions

for

Low Volume Rotating Vane

Flow Meter

Model: DTK

DTK

page 2 DTK K07/0923

1. Contents

1.Contents ........................................................................................................ 2

2.Note 3

3.Instrument Inspection .................................................................................... 3

4.Regulation Use ............................................................................................. 4

5.Operating Principle ........................................................................................ 4

6.Mechanical Connection ................................................................................. 5

7.Electrical Connection .................................................................................... 6

7.1General ................................................................................................ 6

7.2Plug Connection .................................................................................. 6

7.3Cable Connection DTK-..C.. ............................................................. 6

7.4Compact Electronics: (..C30R, ..C30M, ..C34P, ..C34N) .................... 6

8.Technical Information .................................................................................... 7

9.Order Codes ................................................................................................. 7

10.Dimensions ................................................................................................... 7

11.Disposal ........................................................................................................ 8

12.EU Declaration of Conformance ................................................................... 9

Manufactured and sold by:

Kobold Messring GmbH

Nordring 22-24

D-65719 Hofheim

Tel.: +49(0)6192-2990

Fax: +49(0)6192-23398

E-Mail: [email protected]

Internet: www.kobold.com

DTK

DTK K07/0923 page 3

2. Note

Please read these operating instructions before unpacking and putting the unit

into operation. Follow the instructions precisely as described herein.

The instruction manuals on our website www.kobold.com are always for currently

manufactured version of our products. Due to technical changes, the instruction

manuals available online may not always correspond to the product version you

have purchased. If you need an instruction manual that corresponds to the

purchased product version, you can request it from us free of charge by email

([email protected]) in PDF format, specifying the relevant invoice number and

serial number. If you wish, the operating instructions can also be sent to you by

post in paper form against an applicable postage fee.



Operating instructions, data sheet, approvals and further information via the QR

code on the device or via www.kobold.com

The devices are only to be used, maintained and serviced by persons familiar

with these operating instructions and in accordance with local regulations

applying to Health & Safety and prevention of accidents.

When used in machines, the measuring unit should be used only when the

machines fulfil the EC-machine guidelines.

as per PED 2014/68/EU

In acc. with Article 4 Paragraph (3), "Sound Engineering Practice", of the PED

2014/68/EU no CE mark.

Diagram 8, Pipe, Group 1 dangerous fluids

3. Instrument Inspection

Instruments are inspected before shipping and sent out in perfect condition.

Should damage to a device be visible, we recommend a thorough inspection of

the delivery packaging. In case of damage, please inform your parcel service /

forwarding agent immediately, since they are responsible for damages during

transit.

Scope of delivery:

The standard delivery includes:

 Low Volume Rotating Vane Flow Meter model: DTK

DTK

page 4 DTK K07/0923

4. Regulation Use

Any use of the Low volume rotating vane flowmeter, model: DTK”, which exceeds

the manufacturer’s specification may invalidate its warranty. Therefore, any

resulting damage is not the responsibility of the manufacturer. The user assumes

all risk for such usage.

5. Operating Principle

The medium flows through a specially shaped flow housing and causes a vane to

rotate. The vane has imbedded permanent magnets. Which are detected by a

Hall Effect sensor as they pass. The Hall Effect sensor generates a voltage pulse

each time a magnet passes. The frequency of the pulses is directly proportional

to the flow velocity.

DTK

DTK K07/0923 page 5

6. Mechanical Connection

Before installation:

 Remove all transport packaging and ascertain that no packaging material is

left in the instrument

 Please ascertain whether the allowable maximum operating pressure and

operating temperature of the instruments will not be exceeded (see standard

material combinations).

 Please ascertain after completing of mechanical installation, whether the

connection between fitting and pipe is tight.

Warning! Overflows of more than 20 % might damage the bearings

and cause larger measuring errors or malfunction.

DTK

page 6 DTK K07/0923

7. Electrical Connection

7.1 General

 Make sure that the power supply wires are de-energized.

 Connect the power supply and output signal wires according to the wiring

diagrams under 7.2

Caution! Incorrect connection will destroy the electronics.

Make sure that the power supply values of your system are

matching the power supply values of this instrument.

7.2 Plug Connection

DTK-...0400 DTK-...F3; DTK-...L3

NPN open collector PNP open collector

7.3 Cable Connection DTK-..C..

DTK-...0P00; DTK-...0S00

white: + VS

brown: GND

green: signal NPN open collector

7.4 Compact Electronics:

(..C30R, ..C30M, ..C34P, ..C34N)

see

Instruction Manual-Supplement

for Compact Electronics

DTK

DTK K07/0923 page 7

8. Technical Information

Operating instructions, data sheet, approvals and further information via the QR

code on the device or via www.kobold.com

9. Order Codes

Operating instructions, data sheet, approvals and further information via the QR

code on the device or via www.kobold.com

10. Dimensions

Operating instructions, data sheet, approvals and further information via the QR

code on the device or via www.kobold.com

DTK

page 8 DTK K07/0923

11. Disposal

Note!

 Avoid environmental damage caused by media-contaminated parts

 Dispose of the device and packaging in an environmentally friendly

manner

 Comply with applicable national and international disposal regulations and

environmental regulations.

Batteries

Batteries containing pollutants are marked with a sign consisting of a crossed-out

garbage can and the chemical symbol (Cd, Hg, Li or Pb) of the heavy metal that

is decisive for the classification as containing pollutants:

Cd1 Hg2 Pb3 Li4

1. „Cd" stands for cadmium

2. „Hg" stands for mercury

3. „Pb" stands for lead

4. „Li" stands for lithium

Electrical and electronic equipment

DTK

DTK K07/0923 page 9

12. EU Declaration of Conformance

We, KOBOLD Messring GmbH, Nordring 22-24, 65719 Hofheim, Germany,

declare under our sole responsibility that the product:

Low Volume Rotating Vane Flow Meter Model: DTK-...

to which this declaration relates is in conformity with the following EU directives

stated below:

2014/30/EU EMC Directive

2014/35/EU Low Voltage Directive

2011/65/EU RoHS (category 9)

2015/863/EU Delegated Directive (RoHS III)

Also, the following standards are fulfilled:

EN 61000-6-4:2011

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission

standard for industrial environments

EN 61000-6-2:2006

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for

industrial environments

EN 61010-1:2010

Safety requirements for electrical equipment for measurement, control and

laboratory use - Part 1: General requirements

EN 60529:2014

Degrees of protection provided by enclosures (IP Code)

EN IEC 63000:2018 Technical documentation for the assessment of electrical

and electronic products with respect to the restriction of hazardous substances

Hofheim, 20 Sept 2023

H. Volz J. Burke

General Manager Compliance Manager

Indice

Altri manuali Kobold Strumento di misura

Kobold

Kobold NZJ Manuale utente

Kobold

Kobold Heinrichs K09 Manuale utente

Kobold

Kobold URM Manuale utente

Kobold

Kobold SZM Manuale utente

Kobold

Kobold KSK Manuale utente

Kobold

Kobold KEC-2 Manuale utente

Kobold

Kobold DAG-A4B Series Manuale utente

Kobold

Kobold Heinrichs BGN Series Manuale utente

Kobold

Kobold ADI-1F Series Manuale utente

Kobold

Kobold HEINRICH DWF-S Manuale utente

Kobold

Kobold DAG-S4V Series Manuale utente

Kobold

Kobold Heinrichs HPC Manuale utente

Kobold

Kobold ZUB-MANS-KON1/2 Manuale utente

Kobold

Kobold HND-P Series Manuale utente

Kobold

Kobold DFT Series Manuale utente

Kobold

Kobold KEC-2 Manuale utente

Kobold

Kobold DRF34 Series Istruzioni per l'installazione

Kobold

Kobold OVZ Manuale utente

Kobold

Kobold MIM-12*****C3T0 Series Manuale utente

Kobold

Kobold DPL Manuale utente

Kobold

Kobold DAH Manuale utente

Kobold

Kobold VKG Manuale utente

Kobold

Kobold DPM Series Manuale utente

Kobold

Kobold DAG-S4T Series Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente