15
Leister BITUMAT B2
Hot air welder
Handheld hot air welder for overlap welding of modified bitumen membrane liners (SBS, APP) in the open air or in
well ventilated rooms, for various roof systems, on horizontal and shallow-pitched flat surfaces.
Application
Please read operating instructions carefully before use
and keep for future reference.
Operating Instructions (Translation of the original operating instructions)
GB USA
Danger to life when opening the device as live components and connections are
exposed. Unplug the line/mains plug from the plug socket before opening the device.
Incorrect use of the hot air tool can present a fire and explosion hazard
especially near combustable materials and explosive gases.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by qualified specialists or under their super-
vision. Children are not authorized to use this device.
For personal protection, we strongly recommend the tool be connected to an
RCCB (Residual Current Circuit Breaker) before using it on construction sites.
Rated voltage stated on the device must correspond to line/mains voltage.
N 61000-3-11; Zmax = 0.105 Ω+ j 0.066 Ω. If necessary, consultate supply
authority.
In the case of line/mains power failure extract hot air blower and set
main switch to position 0
Do not touch hot welding nozzle, they can cause burns. Allow the tool to cool
down. Do not point the hot air flow in direction of people or animals.
FI
230
400
Warning
Caution
Connect tool to a receptacle with protective earth terminal. Any interruption of
the protective earth conductor inside or outside the tool is dangerous!
Use only extension cables/cords with protective earth conductor!
Protect the device from damp and wet.
The handle and guide bar may not be used as transport aids. The replacement
drive roller must during transport always be secured with the screw-on addi-
tional weight to be in the holder.
