Life Span SP-320 Manuale utente

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au

Product may vary slightly from the item pictured due to model upgrades

Read all instructions carefully before using this product. Retain this owner’s manual for

future reference.

SP-320 OWNER’S MANUAL

SP-320

TABLE OF CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS 3

2. EXPLODED DIAGRAM 5

3. PARTS LIST 7

4. ASSEMBLY INSTRUCTIONS 8

5. ADJUSTMENT 13

6. COMPUTER OPERATION 14

7. EXERCISE GUIDE 15

8. WARRANTY REGISTRATION 17

SP-320

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING - Read all instructions before using this machine.

It is important your spinning bike receives regular maintenance to prolong its useful life. Failing to

regularly maintain your spinning bike may void your warranty.

1. Keep children and pets away from the machine at all times. Do not leave unattended children in the

same room of the machine.

2. Handicapped or disabled persons should not use the machine without the presence of a qualified

health professional or physician.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the

workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Before beginning training, remove all within a radius of 2 meters from the machine. DO NOT place

any sharp objects around the spin bike.

5. Position the machine on a clear, level surface away from water and moisture. Place mat under the

unit to help keep the machine stable and to protect the floor.

6. Use the machine only for its intended use as described in this manual. DO NOT use any other

accessories not recommended by the manufacturer.

7. Assemble the machine exactly as the descriptions in the instruction manual.

8. Check all bolts and other connections before using the machine for the first time and ensure that the

trainer is in the safe condition.

9. Hold a routine inspection of the equipment. Pay special attention to components which are the most

susceptible to wear off, i.e. connecting points and wheels. The defective components should be

replaced immediately. The safety level of this equipment can only be maintained by doing so. Please

don't use the machine until it is repaired well.

10. NEVER operate the machine if it is not functioning properly.

11. This machine can be used for only one person’s training at a time.

SP-320

12. Do not use abrasive cleaning articles to clean the machine. Remove drops of sweat from the

machine immediately after finishing training.

13. Always wear appropriate workout clothing when exercising. Running or aerobic shoes are also

required.

14. Before exercising, always do stretching first.

15. The power of the machine increases with increasing the speed, and the reverse. The machine is

equipped with adjustable knob, which can adjust the resistance.

SP-320

2. EXPLODED DIAGRAM

SP-320

3. PARTS LIST

NO NAME QUANTITY SPEC

1L PEDAL L 1 JD-301（9/16"）

1R PEDAL R 1 JD-301（9/16"）

2 END CAP1 5 60*30*1.5

3 CARRIAGE BOLT 4 GB/T 12-1988 M8*42

4 REAR STABILIZER 1 WELDING

5 FLAT WASHER 4

GB/T 95-2002 8

6 DOMED NUT 4 GB/T 802-1988 M8

(H=16mm)

7 SPRING ADJUSTMENT KNOB 2 φ50*82 (M16*1.5)

8 PLASTIC SLEEVE 2 53.5*23.5*1.5

9 BELT WHEEL 1 φ200*24

10 VERTICAL SEAT POST 1 WELDING

11 END CAP1 2 40*20*1.5

12 SEAT POST 1 WELDING

13 SEAT 1 DD-2681

14 STOPPER 4 φ32*37/(M8X25)

15 FRONT STABILIZER 1 WELDING

16 MAIN FRAME 1 WELDING

17 HANDLEBAR POST 1 WELDING

18 HANDLE BAR 1 WELDING

19 LOCKING KNOB 1 PE+Q235/φ52*47 (M8x15)

20 FLAT WASHER 1 1 φ32*φ8.2*2

21 BOLT 8 GB/T 70.2-2000 M8*15

22 LEFT PROTECT COVER 1 157*73*157 (85g)

23 RIGHT PROTECT COVER 1 156*80*174 (85g)

24 BRAKE KNOB 1 112*32*7

25 ADJUSTMENT KNOB 1 φ40*78

26 LITTLE PLASTIC RING 1 14*8*9

27 PLASTIC RING 2 φ20*φ9*3

28 FIXING NUT 1 2

GB/T 6177.2-2000 M10*1.25

29 CRANK END CAP 2 φ23*7.5

30 SHEET IRON 1 δ5

31 LOCK NUT 7 GB/T 889.1-2000 M8

32 END CAP2 1 53.5*23.5*1.5

33 LEFT CRANK 1 170*27

34 CRANK COVER 1 φ56*28

35 BEARING 2 6004ZZ

36 END CAP3 2 50*25*1.5

SP-320

NO NAME QUANTITY SPEC

37 SPRING WASHER 4 GB/T 859-1987 8

38 FIXING NUT 2 2 GB/T 802-1988 M12X1.25

(H=16mm)

39 FIXING BOLT 2 M6*54

40 NUT 2 GB/T 889.1-2000 M6

41 SCREW 1 13 GB/T 845-1985 ST4.2*19

42 SCREW 2 6 GB/T 15856.1-2002 ST4.2X19

43 SCREW 3 5 GB/845-85 ST4.8X13

44 OUTER CHAIN COVER 1 757*267*60.5 (550g)

45 LITTLE CHAIN COVER 1 108*37*3 (7g)

46 AXIS 1 φ20*162

47 LONG FIXING TUBE 1 φ25*φ20.5*41

48 SHORT FIXING TUBE 1 φ25*φ20.5*9

49 INNER CHAIN COVER 1 505*263*12 (220g)

50 BELT 1 5PK53

51 RIGHT CRANK 1 170*27

52 BRAKE 1 2PCS 130mm

53 BOLT 5 GB/T 70.1-2000 M6*20

54 BRAKE PLASTIC 2 82*41*19

55 BOLT 2

GB/T 5780-2000 M8*40

56 WHEEL 2 φ50*23

57 NUT 4

GB/T 41-2000 M8

58 FIXING NUT 2 2 M12X1.25 H=6

59 FIXING TUBE 1 φ16*φ12.1*35

60 BEARING 2 6001ZZ

61 FLYWHEEL 1 φ453*11(15KG)

62 FLYWHEEL SHAFT 1 φ12*160

63 WOOLLY BLOCK 2 78*38*14

64 HANDLEBAR COVER 1 115*89*75 (60g)

65 COMPUTER 1 HS-6065

66 FIXING NUT 2 27*M20*1（5mm）

67 FLYWHEEL COVER 1 φ59*35

68 SENSOR 1 SR-202

69 SCREW 4 1 ST2.9*9.5

70 FLAT WASHER 2

GB/T 95-2002 12

71 B0TTLE HOLDER 1 φ6

72 SPRING WASHER 5 GB/T 859-1987 6

73 COMPUTER HOLDER 1 δ2.5

SP-320

4. ASSEMBLY INSTRUCTIONS

STEP 1: PREPARATION

A. Before assembling make sure that you will have enough space around the item.

B. Use the present tooling for assembly.

C. Before assembly please check whether all needed parts are available (at the above of this instruction

sheet you will find an exploded diagram with all single parts (marked with numbers) which this item

consists of.

STEP 2:

1. Attach the Front Stabilizer (pt.15) to the

Main Frame (pt.16) using two sets of Ø8

Flat Washers (pt.5), M8 Domed Nut (pt.6)

and M8*42 Carriage bolt (3).

2. Attach the Rear Stabilizer (pt.4) to the Main

Frame (pt.16) using two sets of Ø8 Flat

Washers (pt.5), M8 Domed Nut (pt.6) and

M8*42 Carriage bolt (3).

3. Use the screw (Pt.43) to attach the bottle

holder (Pt.71) to the main frame (Pt.16).

SP-320

STEP 3:

1. Slide the Vertical Seat Post (pt.10) into

the seat post housing on the main

frame (pt.16).

2. Slide the Seat Post (pt.12) into the

Vertical Seat Post (pt.10).

3. Secure the Seat Post (pt.12) with the

Locking Knob (19) and flat washer (20).

You will have to loosen the knurled

section of the Spring Adjustment Knob

(pt.7), pull the knob back and then

select and align holes for the desired

height. Release the knob and retighten

the knurled portion.

4. Attach the Seat (pt.13) to the Vertical

Seat Post (pt.12) as shown, and tighten

the bolts around the screws under the

seat.

SP-320

STEP 4:

1. Slide the Handlebar Post (pt.17) into the

handlebar post housing on the main

frame.

You will have to loosen the knurled

section of the Spring Adjustment Knob

(pt.7), pull the knob back and then select

and align holes for the desired height.

Release the knob and retighten the

knurled portion.

2. Remove the bolts and spring washer from

the Handlebar Post (pt.17), then fix the

Handlebar (pt.18) with 4pcs Ø8 the

Spring Washer (pt.37) and M8*15 the Bolt

(pt.21).

ATTENTION: The handlebar must be attached

tightly

3. Slide the Computer (pt.65) onto the

Computer Holder (pt.73) connect the plug

(A1&A2),

Indice

Altri manuali Life Span Cyclette

Life Span

Life Span SM-410 Manuale utente

Life Span

Life Span SM-310 M2 Manuale utente

Life Span

Life Span SP-870 M2 Manuale utente

Life Span

Life Span SM-400 Manuale utente

Life Span

Life Span RC 80 Manuale utente

Life Span

Life Span SP250 Manuale utente

Life Span

Life Span R7000i Manuale utente

Life Span

Life Span SP-880 Manuale utente

Life Span

Life Span SM-420 Manuale utente

Life Span

Life Span Exer 75 Manuale utente

Life Span

Life Span EXC-10H Manuale utente

Life Span

Life Span X-22 Manuale utente

Life Span

Life Span SP-960 Manuale utente

Life Span

Life Span SM-100 Manuale utente

Life Span

Life Span EXER-80 Manuale utente

Life Span

Life Span EXER-80 Manuale utente

Life Span

Life Span SP620 Manuale utente

Life Span

Life Span C7000i Manuale utente

Life Span

Life Span EXER-49 Manuale utente

Life Span

Life Span Workplace DT-3 Manuale utente

Life Span

Life Span C7000i Manuale utente

Life Span

Life Span SP-850 Manuale utente

Life Span

Life Span SM-800 Manuale utente

Life Span

Life Span SP620 Manuale utente

Manuali Cyclette popolari di altre marche

Weslo

Weslo Vector 302 Guida rapida

TOORX

TOORX BRX85 Manuale utente

Matrix

Matrix KranKcycle Manuale utente

Matrix

Matrix IC3 Manuale utente

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuale utente

Monark

Monark 827E Manuale utente

Stamina

Stamina 1310 Manuale utente

American Fitness

American Fitness SPR-BK1072A Manuale utente

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuale utente

BH FITNESS

BH FITNESS H9158H Manuale dell'operatore

Body Sculpture

Body Sculpture BC-7220G Manuale utente

Cateye

Cateye EC-2300 Manuale utente

FYTTER

FYTTER RACER RC MSR Manuale utente

Kikos

Kikos HM-9090M Manuale utente

Pro-Form

Pro-Form 345 Zlx Bike Guida utente

Fuel Fitness

Fuel Fitness SU135-40 Manuale utente

NordicTrack

NordicTrack Gxr 4.2 Bike Manuale utente

Vision Fitness

Vision Fitness U70 Manuale utente