Life Span SP-710 Manuale utente

NOTE: This manual may be subject to updates or changes. Up to date manuals are av ailable through our website at www.lif espanonline. com.au

Product may varyslightlyfromthe itempictureddue to model upgrades

Read all instructions carefully before using this product. Retain this owner’s manual for

future reference.

SP-710 OWNER’S MANUAL

SP-710

TABLE OF CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS 3

2. EXPLODED DIAGRAM 5

3. PARTS LIST 7

4. ASSEMBLY INSTRUCTIONS 9

5. ADJUSTMENT 14

6. COMPUTER OPERATION 15

7. EXERCISE GUIDE 21

8. WARRANTY REGISTRATION 23

SP-710

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING - Read all instructions before using this machine.

It is important your spinningbike receives regular maintenance to prolong its useful life.Failingto

regularlymaintain your spinningbike mayvoid your warranty.

1. Keep children and pets away from the machine at all times. Donot leave unattended

children in the same room of the machine.

2. Handicapped or disabled persons should not use the machine without the presence of a

qualified health professional or physician.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms,

STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Before beginning training, remove all within a radius of 2 meters from the machine. DO

NOT place any sharp objects around the spin bike.

5. Positionthe machine on a clear, level surface away from water and moisture. Place mat

under the unit to help keep the machine stable and to protect the floor.

6. Use the machine only for its intended use as described in this manual. DO NOT use

any other accessories not recommended by the manufacturer.

7. Assemble the machine exactly as the descriptions inthe instruction manual.

8. Check all bolts and other connections before using the machine for the first time and

ensure that the trainer is in the safe condition.

9. Hold a routine inspection of the equipment. Pay special attention to components which

are the most susceptible to wear off, i.e. connecting points and wheels. The defective

components should be replaced immediately. The safety level of this equipment can

SP-710

only be maintained by doing so. Please don't use the machine until it is repaired well.

10.NEVER operate the machine if it is not functioning properly.

11.This machine can be used for only one person’s training at a time.

12.Do not use abrasive cleaning articles to clean the machine. Remove drops of sweat

from the machine immediately after finishing training.

13.Always wear appropriate workout clothing when exercising. Running or aerobic shoes

are also required.

14.Before exercising, always do stretching first.

15.The power of the machine increases with increasing the speed, and the reverse. The

machine is equipped with adjustable knob, which can adjust the resistance.

SP-710

2. EXPLODED DIAGRAM

SP-710

3. PARTS LIST

NO NAME QUANTITY SPEC

1L PEDAL (L) 1 JD-301（9/16"）(L)

1R PEDAL (R) 1 JD-301（9/16"）R

2 END CAP1 4 φ76

3 CARRIAGE BOLT 4 GB/T 12-1988 M10*90

4 REAR STABILIZER 1 WELDING

5 ARC WASHER 4 φ10

6 DOMED NUT 5 GB/T 802-1988 M10

7NUT 4

GB/T 41-2000 M8

8 BOLT 2

GB/T 5780-2000 M8*40

9 BEARING 4 608ZZ

10 VERTICAL SEAT POST 1 WELDING

11 END CAP 2 2 38*38*1.5

12 SEAT POST 1 WELDING

13 SEAT 1 DD-6619

14 STOPPER 4 φ52*39（M8）

15 FRONT STABILIZER 1 WELDING

16 MAIN FRAME 1 WELDING

17 HANDLEBAR POST 1 WELDING

18 HANDLE BAR 1 WELDING

19 L SHAPE KNOB 2 M10*25

20 FLAT WASHER 1 3 φ45*φ10.5*4

21 PU WHEEL 2 φ69*23

22 SENSOR 1 SR-202

23 COMPUTER 1 ST-6527(ST-7607)

24 NUT 6 GB/T 889.1-2000 M8

25 BOLT 1 1 GB/T77-2007 M6*6

26 L SHAPE KNOB 2 (M16*1.5)X20mm

27 BOLT 1 4 GB/T 70.2-2000 M8*15

28 FIXING NUT 1 2 M12X1.25 H=8MM

29 CRANK END CAP 1 φ28*6.5

30 KNOB 1 φ60*113

31 NUT 2 GB/T 41-2000 M10

32 Twist The Fixings 1 φ20.5*34

33 LEFT CRANK 1 170*15

34 CRANK COVER 1 φ56*28

35 BEARING 4 6004ZZ

36 RIGHT CRANK 1 170*15

37 Screw rod 1 Φ13.5*187

38 WASHER 2 3 φ20*φ14*2.0

39 PLASTIC SLEEVE 1 2 38*38*1.5

40 BOLT 10 1 M10*21

41 SCREW 2 9 GB/T 15856.1-2002 ST4.2X19

42 SHAFT 1 φ25*45

43 SCREW 3 2

GB/845-85 ST4.8X13

SP-710

NO NAME QUANTITY SPEC

44 OUTER CHAIN COVER 1 604*281*57(420g)

45 BEARING 2 6203ZZ

46 AXIS 1 φ20*162

47 LONG FIXING TUBE 1 φ25*φ20.5*41

48 SHORT FIXING TUBE 1 φ25*φ20.5*12

49 INNER CHAIN COVER 1 287*254*10 (205g)

50 BELT 1 5PK1180

51 BELT WHEEL 1 φ200*24

52 SPRING WASHER 3 1 GB/T 859-1987 10

53 FLAT WASHER 3 2

GB/T 95-2002 12

54 FIXING NUT 3 1 M20*1.0

55 BOLT 3 8 GB/T 5780-2000 M5*10

56 FLYWHEEL COVER 1 294*71*92

57 FLAT WASHER 1 2 GB/T 95-2002 10

58 SHAFT NUT 1 φ18*11

59 BOLT 4 1 GB/T 70.1-2000 M6*40

60 NUT 2 2

GB/T 41-2000 M6

61 FLYWHEEL 1 φ460*15(20KG)

62 FLYWHEEL SHAFT 1 φ49*90

63 BOLT 5 1 GB/T 70.1-2000 M6*20

64 BOLT 6 4 GB/T 70.1-2000 M6*30

65 FLAT WASHER 1 8

GB/T 95-2002 6

66 FIXING NUT 2 27*M20*1（5mm）

67 FLYWHEEL HOLDER 2 129*56.5*15

68 BOLT 7 4 GB/T 70.1-2000 M6*12

69 BOLT 8 2 GB/T 70.1-2000 M6*12

70 ADJUSTING METAL 1 117*14.5*δ1.5

71 BLOCK 1 161*21*19

72 WOOLLY BLOCK 1 156*15.5*10

73 BOLT 9 2 GB/T 5780-2000 M5*10

74 SPRING WASHER 1 2 GB/T 859-1987 5

75 SPRING WASHER 2 8 GB/T 859-1987 6

76 LITTLE BELT WHEEL 1 φ64*23

77 FIXING NUT 2 27*6(M20*1)

78 B0TTLE HOLDER 1 φ6

79 PULSE 2

80 SCREW 5 2

GB/845-85 ST4.2X25

81 PULSE WIRE 1 L=800

82 HAND SUPPORT 2 120*65

83 STICKER 2 100*55

84 SUPPORT SHEET 2 δ2

85 BOLT 4 GB/T 70.3-2000 M6*18

86 FLAT WASHER 1 4

GB/T 95-2002 8

87 NUT 4 GB/T 889.1-2000 M6

SP-710

4. ASSEMBLY INSTRUCTIONS

STEP 1: PREPARATION

A. Before assembling make sure that you will have enough space around the item.

B. Use the present tooling for assembly.

C. Before assembly please check whether all needed parts are available (at the above of this instruction

sheet you will find an exploded diagram with all single parts (marked with numbers) which this item

consists of.

STEP 2:

1. Attach the Front Stabilizer (pt.15) to the

Main Frame(pt.16) using two setsof

Ø10 Arc Washers (pt.5), M10 Domed

Nut (pt.6) and M10*90 Carriage bolt (3).

2. Attach the Rear Stabilizer (pt.4) to the

Main Frame(pt.16) using two setsof

Ø10 Arc Washers (pt.5), M10 Domed

Nut (pt.6) and M8*90 Carriage bolt (3).

SP-710

STEP 3:

1. Slide the Vertical Seat Post (pt.10) into

the seat post housing on the main

frame (pt.16).

2. Slide the Seat Post (pt.12) into the

Vertical Seat Post (pt.10), then Secure

using a flat washer1 (20) and L Shape

knob (19). You will have to slacken the

knurled section of the L Shape Knob

(26) and pull the knob back and then

selectthe desired height. Release the

knob and retighten the knurled portion.

3. Now fix the Seat (pt.13) to the Seat

Post(pt.12) as shown, and tighten the

bolts around the screws under the seat.

Indice

Altri manuali Life Span Cyclette

Life Span

Life Span SP-340 Manuale utente

Life Span

Life Span EXER 30 PRO Manuale utente

Life Span

Life Span EXER 45 Manuale utente

Life Span

Life Span SM-700 Manuale utente

Life Span

Life Span SP-550 Manuale utente

Life Span

Life Span S2 Sport Series Manuale utente

Life Span

Life Span SP-870 Manuale utente

Life Span

Life Span Ampera Office Bike Manuale utente

Life Span

Life Span SP700 Manuale utente

Life Span

Life Span EXER-49 Manuale utente

Life Span

Life Span SP-850 Manuale utente

Life Span

Life Span RC-300 Manuale utente

Life Span

Life Span S1 Sport Series Manuale utente

Life Span

Life Span LFE01 Cyclestation 3 Manuale utente

Life Span

Life Span SP150 Manuale utente

Life Span

Life Span RC 80 Manuale utente

Life Span

Life Span SP-650 Manuale utente

Life Span

Life Span EXER-80 Manuale utente

Life Span

Life Span R5i Manuale utente

Life Span

Life Span SP-310 M2 Manuale utente

Life Span

Life Span C7000i Manuale utente

Life Span

Life Span S2 Sport Series Manuale utente

Life Span

Life Span DT-3C Manuale utente

Life Span

Life Span SP250 Manuale utente

Manuali Cyclette popolari di altre marche

Weslo

Weslo Vector 302 Guida rapida

TOORX

TOORX BRX85 Manuale utente

Matrix

Matrix KranKcycle Manuale utente

Matrix

Matrix IC3 Manuale utente

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuale utente

Monark

Monark 827E Manuale utente

Stamina

Stamina 1310 Manuale utente

American Fitness

American Fitness SPR-BK1072A Manuale utente

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuale utente

BH FITNESS

BH FITNESS H9158H Manuale dell'operatore

Body Sculpture

Body Sculpture BC-7220G Manuale utente

Cateye

Cateye EC-2300 Manuale utente

FYTTER

FYTTER RACER RC MSR Manuale utente

Kikos

Kikos HM-9090M Manuale utente

Pro-Form

Pro-Form 345 Zlx Bike Guida utente

Fuel Fitness

Fuel Fitness SU135-40 Manuale utente

NordicTrack

NordicTrack Gxr 4.2 Bike Manuale utente

Vision Fitness

Vision Fitness U70 Manuale utente