Linn LOUDSPEAKERS Manuale utente

LOUDSPEAKERS

OWNERS MANUAL

KAN SARA ISOBARIK

2

CONTENTS

INTRODUCTION

INSTALLATION

STANDS

MAINTENANCE/SERVICE

GENERAL

ACTIVE & PASSIVE

UPGRADING HIERARCHY

GUARANTEE & SERVICE

3

NTRODUCTION Thank you for buying this Linn product. These Linn

speakers have been designed to give outstanding performance over an

extended lifetime.

Before purchasing any of our speakers, we expect you to have had an

opportunity to audition these speakers in a single speaker demonstration

room. It is important that you make your own decision about the performance

of our speakers with suitable ancillary equipment. We are confident that under

these conditions any of our range will easily outperform the competition.

You should only have one pair of loudspeakers in the room. Any other

transducer will unacceptably distort the sound. The speaker in your TV set or

even a telephone will have a detrimental effect on sound quality.

I

4

NSTALLATION One of the main objects of speaker installation is to

mount the speaker cabinet as rigidly as possible. All our loudspeakers

have purpose-designed stands with adjustable pointed feet, which are a

simple but effective means of preventing movement.. Kans and Saras

may be shelf-mounted.

To ensure consistency of performance, we have designed all our

loudspeakers to work best when positioned within 5 -10 cms from the wall, and

at least 45 cms from any corner, where possible.

Connection of the speaker to the amplifier should be with a good quality multi-

strand cable such as the Linn range of loudspeaker cables. The cables

should be terminated at both ends with the connectors supplied. Lesser

speaker cables will degrade the signal.

I

5

TANDS KAN/SARA. When assembling

stands, fit all the bolts loosely before final

tightening.

Ensure that the stand is level and that the

speaker rests firmly on the top.

We include small top spikes with the Kan and

Sara stands. These will bed slightly into the

base of the speaker. This ensures a firm

coupling between the speaker and the stands.

DMS/PMS. The current stand has a welded box

section. These stands feature spikes which bolt

onto the top and bottom of the stand. The top

spikes should locate into the pads on the base of

the speaker. To

fit these stands,

the speaker

should be

inverted with

care (use the

top piece of

original packing

to protect the

speaker) and

the top spikes

adjusted to give no play.

The stand should then be placed on the floor and the speaker placed on top.

The bottom spikes should now be adjusted to give the minimum amount of

movement. Once the spikes have been adjusted, then the locking nuts should

be fully tightened.

GENERAL. On wooden floors it can be useful to mount the bottom spikes onto

the heads of crosshead woodscrews. These should be fully screwed into the

floor boards, using the adjustment provided on the spike to take up any play

and ensure maximum rigidity.

S

6

AINTENANCE/SERVICE Linn speakers require no internal maintenance,

and on no account should you try to remove either the back panel or any

of the drive units.

Should any problems arise, contact the supplier prior to returning the

speakers. Always return the speakers as a pair, even if the fault only

manifests itself on one speaker.

Always use correct original packing in order to reduce the risk of transit

damage. When shipping Saras and DMS/PMS, the treble unit should be

protected from accidental damage by some adhesive tape.

If you are in any doubt as to the packaging, always consult your supplier, who

may be able to supply a replacement set if necessary.

ENERAL Care should be taken to avoid direct heat or sunlight on the

speaker cabinets. We would recommend using a standard furniture

polish to maintain the finish.

The Declon grilles on the Sara and the DMS/PMS will, over the years,

accumulate some dust, which can be removed by using the relevant vacuum

cleaner attachment. Handling of the cone of the treble unit should be avoided,

as this can result in damage to the unit.

Always ensure that the top grilles of the DMS/PMS remain in place to prevent

dust getting into the tweeter, and avoid placing heavy objects on the top of

these speakers, as pressure on the midrange and treble unit can result in

damage.

The Kan grilles are not removable. Any attempt to remove the grille is liable to

result in damage to either the grille or the cabinet.

M

G

7

CTIVE AND PASSIVE SPEAKERS All of our speakers are available in

active or passive versions. An active speaker is one which has no

internal crossover, each speaker being directly connected to Its own

individual power amplifier.

In this system the frequencies are separated before the signal is fed to the

power amplifier. This type of system has many advantages over a passive

system, as each amplifier has much greater control over the drive unit. This

results in a more accurate and revealing system. This type of system

therefore requires a very high quality turntable, arm and cartridge combination.

It should also be remembered that one better amplifier used in the passive

mode will outperform two or more inferior amplifiers in the active mode.

PGRADING HIERARCHY Under no circumstances can a loudspeaker

improve the signal fed into it. Therefore, when upgrading the system

you should always try to improve the quality of the signal.

Improvements to the turntable, arm, cartridge and amplifier should be made

before considering up-grading the speakers.

The final decision should be made following auditioning the proposed upgrade

against your existing system.

A

U

8

UARANTEE & SERVICE The unit is guaranteed under the conditions

which apply in the country of purchase. In addition to any statutory

rights the customer may have, we undertake to replace any parts that

have failed due to faulty manufacture.

Keep a copy of the sales receipt, as this will establish the purchase date of the

unit. Refer all enquiries to authorised dealers only.

For information on your nearest dealer, contact the Linn Factory in the UK or

your overseas distributor.

G

Altri manuali per LOUDSPEAKERS

1

Questo manuale è adatto per i seguenti modelli

1

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP

HP GL313AA - USB Speakers PC Multimedia Manuale utente