LINSHANG LS126A Manuale utente
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 1 of 7
LS126A
UV Light Meter
User Manual V2.0
Please read this manual carefully before using and reserve it for reference.
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 2 of 7
I. Product introduction
The UV light meter is mainly for intensity and energy measurement of UVA light source. The meter
features in an ultra-small probe design, suitable for measuring the UV intensity and energy of some small
space where conventional probe is difficult to put in.
II. Technical Parameters
1. Spectral response: 340nm-420nm, calibrated with 395nm UV LED light source
2. Measuring range: 0 - 20000mW/cm2
3. Resolution: 1mW/cm2
4. Energy measuring range: 0-9999999mJ/cm2
5. Record time: 0-99999s
6. Resolution: ±10 %
7. Sampling speed: 2048 times/second
8. Optional unit: mW/cm2 (default), W/cm2, W/m2
9. Test Hole Diameter: ￠=3mm
10. Probe size: 36mm long×7.2mm wide ×4.7mm thickness
11. Instrument size: 170mm long ×76mm wide ×26mm high
12. Probe wire length: 0.8m
13. Instrument weight: about 232 grams
14. Display: 240*160 dot matrix LCD
15. Battery: 4 AAA alkaline dry batteries
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 3 of 7
III. Spectral response curve
IV. Product features
1. The probe is designed with ultra-small size; the narrowest width that can be put in is 7.2mm.
2. With a high-speed sampling speed of 2048 times per second, accurately calculate the UV energy
value.
3. Have statistical function, directly display real-time value, maximum value, minimum value, average
value and measurement duration.
4. Suitable for measuring the intensity and energy of UV LED light source for UV curing machine..
V. Operations
1. Power on/off
Power on: Press “ ” to power on the instrument. After powering on, the instrument displays the
calibration coefficient, calibration date, production date, version number, serial number and other
information. Then enters the measurement mode.
Power off: Long press the “ ” button to power off; or the instrument will automatically power off in
10mins after no operation when Auto Off set ON.
The data recorded before shutdown will be automatically saved to the history record.
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 4 of 7
2. Parameter settings mode
In the off state, long press the “ ” button 3s to enter the parameter setting mode.
In the setting mode, “ ” and “ ” are Select buttons, and “ ” is the Confirm button.
A. Select whether to automatically power off (Auto Off: ON/OFF)
Short press the “ ” or “ ” button to select ON/OFF
Selecting ON indicates that the instrument automatically powers off in 10mins after no operation.
Selecting OFF indicates that the user has to manually turn the instrument off, and the instrument will
not automatically power off.
Short press “ ” button to complete the setting and enter the next Set option.
B. Whether to display the energy value (Energy display: ON/OFF)
Short press the “ ” or “ ” button to select ON/OFF
Short press “ ” button to complete the setting and enter the next Set option.
C. Smooth (OFF/50HZ/60HZ)
If UV light source powered by AC power supply, the AC frequency affects the power measurement,
so that the smoothing process becomes necessary for those probes with high sampling speed (2048
times/second), enter the smooth setting mode, short press the “ ” or “ ” button to select.
OFF: Select this option, if UV light is DC powered and does not need smoothing
50HZ: Select this option for 50HZ AC
60HZ: Select this option for 60HZ AC
Short press “ ” button to complete the setting and enter the next Set option.
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 5 of 7
D. Select the unit (Units：μW/cm2, mW/cm2, W/cm2, W/m2)
Short press the “ ” or “ ” button to select the unit required.
Short press “ ” button to complete the setting and enter the standard selection interface.
E. Select the standard (LS-STD, JJG 879-2015)
Short press the “ ” or “ ” button to select the standard.
LS-STD(企业标准): Calibration in accordance with enterprise standard.
JJG 879-2015(国标): Calibration in accordance with China national standard.
Short press “ ” button to enter the measurement mode.
3. Measurement mode
In the measurement mode. The system displays the real-time value, maximum value, minimum value,
average value, measurement duration, energy value (Energy display =Yes)
In the measurement mode, if the backlight is off, press the “ ” button to light the backlight; if the
backlight is already lit, short press the “ ” button, and the “HOLD” icon will be displayed in the lower
left corner of the interface. All data will be kept on the LCD, and the current data will be saved to the
history record.
In the “HOLD” state, if the backlight is off, press the “ ” button to light the backlight; if the backlight
is already lit, short press the “ ” button to cancel the HOLD function and start a new measurement.
In the measurement mode, if the backlight is off, short press the “ ” button to light the backlight; if
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 6 of 7
the backlight is already lit, press the “ ” button to clear up the current data and start a new
measurement.
In the measurement mode, short press “ ” or “ ” to enter the record data query mode.
4. Record data query mode
No.1 is the latest record data (up to 9 records are stored in the instrument, and the oldest record will
be deleted automatically when exceed 9 records).
Short press “ ” or “ ” to scroll up or down a record.
Long press the “ ” button 3 second to clear all records.
Short press the “ ” button to enter the measurement mode.
VI. Precautions
1. When not in use, please long press the “ ” button to power off the instrument.
2. Avoid contacting with corrosive materials and keep away from high humidity.
3. After shutdown, store it in a special packing box and keep it in a safe place. Protect the photosensitive
part of the probe from polluting.
4. The recommended period of calibration is one year.
5. Because the UV probe is sensitive to humidity, the environment in which it is stored is important.
When not in use for a long time, be sure to store the instrument in a low humidity environment.
6. When the instrument displays low battery, replace the battery.
VII. Packing list
No. Description Quantity Unit
1 UV Light Meter 1 pcs
2 AAA battery 4 pcs
3 User manual 1 pcs
4 Certificate/Warranty card 1 pcs
5 Plastic box 1 pcs
Shenzhen Linshang Technology Co., Ltd.
2022-06-23 Page 7 of 7
VIII. Service
1. The instrument has one-year warranty. If the instrument works abnormally, please send the whole
instrument to our company for maintenance
2. Provide users with spare parts and lifelong maintenance services
3. Provide the users with the instrument calibration service
4. Free technical support for long term
Manufacturer: Shenzhen Linshang Technology Co., Ltd.
Website www.linshangtech.com
Service hotline: 086-755-86263411
Email: sales21@linshangtech.com
Indice
Altri manuali LINSHANG Strumento di misura
LINSHANG
LINSHANG LS162 Manuale utente
LINSHANG
LINSHANG LS163 Manuale utente
LINSHANG
LINSHANG LS110 Manuale utente
LINSHANG
LINSHANG LS232 Manuale utente
LINSHANG
LINSHANG LS170 Manuale utente
LINSHANG
LINSHANG LS251D Manuale utente
LINSHANG
LINSHANG LS108 Manuale utente
LINSHANG
LINSHANG LS300 Manuale utente
LINSHANG
LINSHANG LS197 Manuale utente
LINSHANG
LINSHANG LS126C Manuale utente
LINSHANG
LINSHANG LS193 Manuale utente
LINSHANG
LINSHANG LS182 Manuale utente
LINSHANG
LINSHANG LS133 Manuale utente
LINSHANG
LINSHANG LS171 Manuale utente
LINSHANG
LINSHANG LS220B Manuale utente
LINSHANG
LINSHANG LS108H Manuale utente
LINSHANG
LINSHANG LS192 Manuale utente
LINSHANG
LINSHANG LS195 Manuale utente
LINSHANG
LINSHANG LS131 Manuale utente
LINSHANG
LINSHANG LS233 Manuale utente
