Marathon MBWC24-2DSS Istruzioni per il montaggio
Owner's
Use & Care Guide
MBWC24-2DSS
FRENCH DOOR WINE &
BEVERAGE CENTRE
Congratulations on the purchase of your new Premium Wine & beverage
cooler!
To activate your Warranty, please register your appliance at www.stirlingmarathon.com or by
completing and mailing the enclosed Warranty Registration Card. We are confi-dent you will
have years of hassle-free enjoyment and ask that you please retain the Use & Care Guide for
future reference and your safety. Before installing please, read your Use & Care Guide carefully
and pay special attention to the Safety & Warning information outlined in the following pages
For immediate assistance: 1-844-309-9777
www.stirlingmarathon.com
Table of Contents
Important Safety information ..........................................................................................................
Installation location................................................................................................................................
Installation requirements ...................................................................................................................
Ventilation Grill Assembly...................................................................................................................
Switching the appliances ‘‘On’’........................................................................................................
Control description ...............................................................................................................................
Recommended Wine Serving Temperature Chart.................................................................
Troubleshooting.......................................................................................................................................
Warranty......................................................................................................................................................
3
4
5-6
7
8
Care & Maintenance...............................................................................................................................
/RXcabW\UbVS@S[]dOPZSAVSZdSa..................................................................................................
9
10
11
12
13
14
Important Safety Information
3
•Do not move your Cabinet while loaded with wine. You might distort the body. The wine cellar should be installed in a
suitable place to avoid touching the compressor with hand.
•This appliance can not be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be performed by children without supervision.
•If the power cord is damaged, it must be replaced by a manufacturers authorized servicer or a similarly qualified person in
order to avoid a hazard.
•Opening the door for long periods can cause a significant increase in the temperature in the compartments of the appliance.
•Clean regularly surfaces that can come in contact with food and accessible drainage systems.
•If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent
mould developing and odour within the appliance.
DO NOT USE AN EXTENSION CORD
To reduce the risk of fire, electrical shock, or
injury when using your appliance, follow these basic precautions:
•Read all instructions before using the Wine cooler.
•DANGER or WARNING: Risk of child entrapment.
•Child entrapment and suffocation are not problems of the past. Junked or disposed of appliances are still dangerous even if
they will “just sit in the garage a few days”.
•Before you throw away your old Wine cooler/Beverage Cooler: Take off the door. Leave the shelves in place so that children
may not easily climb inside.
•Children should be supervised to ensure that they do not play with the appliance.
•Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
•Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. The fumes can create
a fire hazard or explosion.
•WARNING: Keep ventilation openings, in the appliance enclosure or built-in structure, clear of obstruction;
•To avoid a hazard due to the possible instability of the appliance, it must be levelled following the instructions.
•WARNING: Do not damage the refrigerant circuit;
•WARNING: When positioning the appliance, ensure the supply cord is not pinched or damaged.
•WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
•Flammable and explosive items should never be put in or stored near the wine cooler.
-------------------SAVE THESE INSTRUCTIONS --------------------
WARNING
DANGER
Installation location
Installing your Marathon Wine & beverage center
Before using your new Wine Cooler, we recommend leaving Cooler door open and
unplugged for 24 hours before installation or use. This will allow time to clear any
residual odours from the interior liner and hardwood shelves.
Your Premium Marathon Wine et beverage cooler is engineered for built-in or free-
standing installation. The front bottom vent must not be covered.
Your Marathon cooler is also equipped with 4 adjustable feet to facilitate easy
levelling. We recommend that you tighten the back feet first and then adjust the
front feet to level the wine and/or beverage cooler
Installation location
Choosing the right location for your Wine Cooler is important. We highly recommend the
following location criteria:
• The appliance must be positioned such that the plug and power outlet are
accessible. Release the power cord and move the appliance to its final location.
The appliance should be installed in a suitable place where the compressor will not
be subject to physical contact, unencumbered and well ventilated
• Dry area, not too damp or humid – ideally at maximum 65% relative humidity for
peak performance and reduced sweating on the interior door when opening. If the
temperature is above or below this range, it may affect the performance of
the wine and/or beverage cooler . Placing in cold, hot or humid temperature
conditions may cause temperature fluctuations and increased running operation
costs.
• Flat, level floor
• Approved electrical outlet (preferably with a surge protector) within 3 feet of the
Wine Cooler.
• Minimum 1 meter from any microwave oven. Certain microwave ovens do not have
a wave interference shield. When placed too close to the wine or beverage cooler,
the performance may be affected.
•Marathon Wine & beverage coolers are NOT CERTIFIED for outdoor use.
Outdoor use will void your warranty and possibly cause a safety hazard and
result in fire or personal injury.
CAUTION! Your Marathon & beverage cooler is equipped with a three-prong power
cord which has a ground wire. The power cord should never be altered or used with
an extension cord or power bar. Improper use of the grounding plug can result in the
risk of electric shock. Consult a qualified electrician or service person if the grounding
instructions are not completely understood. If the power cord is damaged, it must be
replaced by a qualified person to avoid electrical hazards.
4
Installation RequirementsInstallation Requirements
Ø Min. 2 ½ ’’
Make up air
(recommended)
CUTOUT
MBWC24-2DSS
Cutout & Dimensions
DIMENSIONS
22 13/16’’ | 57.5cm
23 7/16’’ | 59.5cm
32 ¼’’-35’’ | 82-89 cm
23¼’’ | 59 cm
min. 23 ⅞’’ | 60.5 cm
32 11/16’’ - 35 ¼’’ | 82-89 cm
Please ensure you have a minimum of 3/16” clearance on each side of the unit. This space will
allow fresh air to flow freely and remove and insert easily the wine cooler as needed.
Warning! DO NOT SEAL BY SILICON OR ANY OTHER MANNER THE SIDE OF THE UNIT
OTHERWISE THE GUARANTEE WILL BE VOID.
In “Hot and Humid locations”, an air vent with a minimum ventilation size of 200mm x
40mm MUST be cut out on each side OR 2 circular shapes with a diameter of 65mm at the
top of either side of the partitioning, allowing cool air to flow into the rear of the cabinet.
This air vent must not be opened on the same side as other appliances, such as ovens, or an
area that is sealed and without access to fresh cool air. FaiFailing to comply with the above
specifications could result in WARRANTY BECOMING VOID.
5
6
Installation RequirementsInstallation Requirements
MBWC24-2DSS
Cutout & Dimensions
DOOR CLEARANCE
227/16’’ | 53 cm
32 7/16’’ | 82.4 cm
11 9/16’’ | 29.4 cm
23 ½’’ | 59.6 cm
34 ⅝’’ | 88 cm
1. Please follow the installation diagram when installing built-in
wine cellars. Use no less than the minimum installation
dimension or it will affect the venting of the unit.
2.The built-in wine coolers has a power switch located on the
control panel so access to electrical outlet is not needed to
power off your unit.
3.The wine cooler requires a standard 120 volt/15 amp
dedicated power supply.
4.The power cord is approx. 6 ft./2M in length and is fixed on
the right side at the back when looking from the front of the
cabinet.
Ventilation Grill Assembly
Ventilation Grill Assembly
7
To protect your wine and/or beverage cooler while transit, We have
carefully packed and protected the ventilation grill in the styrofoam
and/or separate cardboard carton. DO NOT DISCARD PACKAGING
without removing the stainless steel ventilation grill.
Please note that for model MBWC24-2D, the legs are adjustable to 2 inches to assist with
varied counter heights A minimum of 34.5” height is required for the front ventilation plate
to be properly secured once installed. The stainless front ventilation grill is packaged
separately in the wine cooler. Once the wine and beverage cooler is levelled and placed into
the location, the front ventilation grill is easily installed and secured by the 4 stainless screws
included.
MBWC24-2D is designed for standard counter high installations which requires adjusting the
legs to 34.5” in order to fit the standard 5” ventilation grill. If you have a custom installation
between 32.5”-34.5”, a smaller 3.25” ventilation grill also comes with the unit.
Use and care
•Gurgling sound - caused by the refrigerant flowing through the appliance’s coils.
• Crackling/popping sounds - resulting from the contraction and expansion of the
refrigerant gas to produce cold.
• Fan operating sound - to circulate the air within the wine cellar.
8
Unpacking and cleaning the wine cooler
Use a soft cloth to clean the interior surface with lukewarm water.
Switching The Appliance On
Before connecting the refrigerator to an electrical power supply, let it stand upright for
approximately 2 hours to let the refrigerant settle in the compressor. This will reduce the
possibly of malfunctions in the cooling system due to transportation. Please wipe and clean
the interior of the refrigerator thoroughly with a damp, non-abrasive cloth.
Once positioned, plug the wine & beverage cooler into the power outlet and turn “ON” by
pressing the “Power Button” for 3 seconds.
When you use your Marathon wine & beverage cooler for the first time (or restart the
appliance after having it shut off for a long time) there will be a few degrees variance
between the temperature you have selected and the one indicated on the LED readout.
This is normal and will adjust to the desired temperature once the compressor and cooling
system has been running for several hours.
IMPORTANT: If the unit is unplugged, power is lost, or is turned off, wait 3 to 5 minutes
before restarting the unit. The compressor will not re-start immediately and requires this
time to automatically restart.
Frost Free Fan Cooled Operation
Your Wine cooler is engineered with a high efficiency compressor cooling system that uses
a fan to cool and regulate your desired temperature setting. This means you never have to
worry about defrosting your wine & beverage cooler and it will provide years of hassle-free
enjoyment. Like all Frost Free and compressor appliances, you will hear the fan operating
and the compressor cycling on and off while it defrosts itself. The following sounds will most
likely occur during normal operation:
Control description
LED Temperature Control
IMPORTANT: The LED temperature displays the actual internal air temperature of your
Marathon Wine & beverage cooler. The temperature settings are preset at the factory
and in the event of a power interruption, all previous temperature settings are
automatically erased and it will revert to the factory preset temperature settings.
Once you program your desired temperature setting, it is strongly recommen-
ded not to adjust frequently. The thermostat is accurate and will maintain the
temperature inside the wine cellar +/- 2.5º C. Please note that the depending
on the thickness of the wine bottle, and loading, the actual temperature of the
wine may differ from the wine and beverage cooler setting by +/- 1ºC.
9
1
2
3
Temperature Display
Displays the current temperature.
Temperature adjustment °C or °F Temperature Conversion
Press once and each time afterwards the inside temperature will reduce by 1°C.
To set, simply stop when you have reached your desired temperature setting.
The temperature display will then revert to the current temperature and start
cooling to your desired temperature. If pressed several times, the tempera-ture
setting will reach its lowest setting (5°C - wine cooler, 2°C - Beverage coo-ler),
then start again at the maximum temperature setting (20°C - wine cooler, 10°C
- Beverage cooler). To change the temperature display to Celsius or Fa-
hrenheit simply press and hold the button for 3 seconds.
Interior light & Power “ON/OFF”
Press the Interior light button to turn ON or OFF the interior LED light.
Press and hold the button for 3 seconds to turn the power ON or OFF.
Use and care
CARE & MAINTENANCE
Clean your Wine Cooler/Beverage Cooler
1. Turn off the power, unplug the appliance, and remove all items including shelves and rack.
2. Wash the inside surfaces with a warm water and mild soap solution.
3. Wash the shelves with a mild soap solution.
4. Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
5. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
1. Remove all stored wines/beverage
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation.
Also, protect the outside of the appliance with a blanket or similar item.
10
•
Energy saving tips
•
•
The appliance should be located in the coolest area of the room, away from
heat-producing appliances and out of direct sunlight.
Ensure that the unit is adequately ventilated.
Do not keep the door open any longer than necessary.
Power failure
In the event of a short power outage, your wine cooler will save your set temperature preferences.
Any power outage lasting longer than 10 minutes, the unit will reset back to the factory default
temperature settings.
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off for
a long period, you need to take the proper steps to protect your contents.
Vacation Time
Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off
the appliance. Clean and dry the interior and exterior thoroughly.
To prevent odour and mould growth, leave the door open slightly blocking it open if necessary.
Moving your Wine & Beverage Cooler:
Indice
Altri manuali Marathon Elettrodomestico da cucina
