Metos 2025319 Manuale utente

STAND FOR GLASSES AND CUPS

Installation and Operation Manual

S/N: Rev.: 1.0

2025319

12.9.2003 Rev.

1. General .......................................................................................................... 1

2. Operation instructions ................................................................................. 1

2.1 Operation ....................................................................................................................... 1

2.1.1 Functional description and use .............................................................................. 1

2.1.2 Cleaning ................................................................................................................. 1

3. Installation ..................................................................................................... 2

3.1 Transport package ......................................................................................................... 2

3.2 Assembly instructions ................................................................................................... 2

3.2.1 Installing the band .................................................................................................. 2

3.2.2 Assembly ............................................................................................................... 4

4. Spare parts .................................................................................................... 6

12.9.2003 Rev.

12.9.2003 Rev. 1.0

General

1. General

Carefully read the instructions in this manual as they contain important information re-

garding proper, efficient and safe installation, use and maintenance of the appliance.

Keep this manual in a safe place for eventual use by other operators of the appliance.

2. Operation instructions

2.1 Operation

2.1.1 Functional description and use

The appliance is designed for storage of cups, glasses and plates. About 150 glasses fit in

the stand.

The appliance body is of stainless steel and the shelves are of thick, shockproof glass. The

shelves rotate easily on ball bearings. Thanks to the spiral construction picking is easy.

The shelf diameters are 55, 50 and 45 cm. The shelves have railings.

2.1.2 Cleaning

In normal use, the appliance does not require any other daily care than sufficient cleaning.

Use only neutral or slightly alkaline cleaning agents or wipe the surfaces with a damp

cloth. Follow the instructions provided by cleaning agent manufacturers. Abrasive mate-

rials should not be used.

12.9.2003 Rev. 1.0

Installation

3. Installation

3.1 Transport package

Take the assembly instructions and the appliance components out of the package and put

them on a work table. The glasses have been packed in cardboard. You will find the axle

on the side of the box, the bottom lowermost in the box and small parts in a bag on the

box edges. The cardboard parts of the transport package are recyclable.

3.2 Assembly instructions

3.2.1 Installing the band

1. Place the bands and the holders on the work table. Press the band D450 in the

holder’s slot. Tighten the retaining screw M5.

2. Mount the holders on the D500 and D550 bands.

3. Place the glasses on the work table. Tighten the bands with the help of plastic

screws on glasses. Assembly order: D450, D500, D550.

12.9.2003 Rev. 1.0

Installation

Installing the band

1. Band D450, D500, D550

2. Band holder

3. Band holder’s slot

4. Retaining screw

5. Glass D450, D500, D550

6. Plastic screw

Glass shelf assembled

12.9.2003 Rev. 1.0

Installation

3.2.2 Assembly

1. Fasten the bottom to the axle with the bottom screw M12.

2. Place the bushing on the axle. Tightly fasten the bushing with the help of the re-

taining screw M5 at the height of the lowermost shelf as desired.

3. Place the sliding bearing on the bushing on the axle.

4. Place the plastic ring, with the raised edge upwards, on the sliding bushing on the

axle.

5. Place the glass D550 on the plastic bushing on the axle. (Band fastened, see “In-

stalling the band”.)

6. Place another plastic ring, with the raised edge downwards, on the glass on the ax-

le.

7. Place the bushing on the axle. Tighten the retaining screw M5 well so that the glass

is steady.

8. Mount the remaining bushings, sliding bearings, plastic rings and glasses on the

axle in the same order, at the shelf height desired. Mounting order: lower shelf

D550, middle shelf D500, upper shelf D450.

9. Finally install the knob using the retaining screw M6 on the axle.

Parts:

3 pcs Glass D450, D500, D550

3 pcs Band D450, D500 D550

9 pcs Band holder (retaining screw M5 and plastic screw fixed)

1 pc Knob + retaining screw M6

1 pc Axle and bottom screw M12

1 pc Bottom

6 pcs Bushing (retaining screw M5 fixed)

6 pcs Plastic bushing

3 pcs Sliding bearing

1 pc Hexagon spanner M5, M12

Y 1:X

Indice

Altri manuali Metos Elettrodomestico da cucina

Manuali Elettrodomestico da cucina popolari di altre marche

Tayama

Tayama TYG-35AF Manuale utente

AEG

AEG 43172V-MN Manuale utente

REBER

REBER Professional 40 Guida utente

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuale utente

Presto

Presto fountain popper Manuale utente

Westmark

Westmark 1035 2260 Manuale utente

Zanussi

Zanussi ZCG64396XA Manuale utente

HOFFEN

HOFFEN SM-9302M Manuale utente

Philips

Philips HD3133 Manuale utente

Ronco

Ronco Beef Jerky Manuale utente

Hendi

Hendi 470411 Manuale utente

Livoo

Livoo MEN386 Manuale utente

Vogue

Vogue D446 Manuale utente

croydon

croydon WR-10313-700 Manuale utente

ADE

ADE AUTOMATIC-L Manuale utente

Chefman

Chefman RJ43-SQ Series Manuale utente

Vacmaster

Vacmaster VP680 Manuale utente

Jetmaster

Jetmaster 900HG Manuale utente