Milwaukee SM500 Manuale utente

Milwaukee

USER MANUAL

PORTABLE

ORP METER

MODEL: SM500

Smart ORP Meter

ISMIL500 11/01

SPECIFICATIONS:

SM500

RANGE ±1000 mV

RESOLUTION 1 mV

ACCURACY (@25°C) ±5 mV

ORP ELECTRODE MA921B/1 (included)

ENVIRONMENT 0 to 50°C, 95% RH max.

BATTERY TYPE 9V alkaline (included)

BATTERY LIFE approximately 300 hours of use

DIMENSIONS 145 x 80 x 40 mm

WEIGHT 220 g (with battery) meter only

OPTIONAL ACCESSORIES:

M10000B Electrode rinse solution, 20 ml sachet (25 pcs)

MA9015 Electrode storage solution, 220 ml bottle

MA9020 200-275 mV ORP solution, 220 ml bottle

MA921B/1 Platinum ORP electrode with 1 m cable

WARRANTY:

This instrument is warranted from all defects in materials and

manufacturing for a period of two years from the date of purchase.

The electrode is warranted for a period of 6 months.

If during this period, the repair or replacement of parts is required,

where the damage is not due to negligence or erroneous operation

by the user, please return the parts to either dealer or our office

and the repair will be effected free of charge.

Note: We reserve the right to modify the design, construction and

appearance of our products without advance notice.

Milwaukee

OPERATION:

• The meter is supplied complete with a 9V battery. Slide off

the battery compartment cover on the back of the meter.

Install the battery while paying attention to its polarity.

• Always remove the electrode protective cap before taking

any measurement. If the electrode has been left dry, soak

the tip in storage solution for a few

minutes to reactivate it.

• Connect the ORP electrode to the

BNC socket on the top of the meter.

• Immerse the tip (2.5 cm) of the ORP

electrode into the sample.

• Turn the instrument on by pressing

the ON/OFF key.

• Allow the reading to stabilize before

taking measurements.

• After use, switch the meter off and

store the electrode with a few drops

of storage solution in the protective

cap.

• The meter is factory calibrated. ORP

electrodes are inter-changeable and

no mV calibration is needed when

they are replaced.

MAINTENANCE:

• To correctly perfom a redox measurement, the surface of

the ORP electrode must always be clean. Use for this

purpose the M10000B rinse solution. If needed, brush the

Platinum tip with very fine abrasive paper.

• When not in use, the tip of the electrode should always be

kept moist and safe from any mechanical stress.

BATTERY REPLACEMENT:

When the battery becomes weak the meter will display "S".

When the low battery indicator appears, the battery has only

about 50 hours of working time left. A low battery will result in

unreliable measurements. It is recommended to replace the

battery immediately.

Battery replacement must only take place in a non hazardous

area using an alkaline 9V battery.

Turn the meter off, slide off the battery compartment cover at

the rear of the meter and replace the 9V battery with a new

one. Make sure the battery contacts are tight and secure, seat

the battery in its compartment and insert the cover again.

Altri manuali Milwaukee Strumento di misura

Milwaukee

Milwaukee M12 SUB-SCANNER 2291-20 Manuale utente

Milwaukee

Milwaukee MI 413 Manuale utente

Milwaukee

Milwaukee MW13 Manuale utente

Milwaukee

Milwaukee EC40 Manuale utente

Milwaukee

Milwaukee CD97 Manuale utente

Milwaukee

Milwaukee 2217-40 Manuale utente

Milwaukee

Milwaukee PRO Lux MW700 Manuale utente

Milwaukee

Milwaukee LDM 30 Manuale utente

Milwaukee

Milwaukee 48-22-9801 Manuale utente

Milwaukee

Milwaukee C 12 IC AVD Manuale utente

Milwaukee

Milwaukee 2010R Manuale utente

Milwaukee

Milwaukee MW190 Manuale utente

Milwaukee

Milwaukee pH52 Manuale utente

Milwaukee

Milwaukee PRO MI414 Manuale utente

Milwaukee

Milwaukee 2205-20 Manuale utente

Milwaukee

Milwaukee REDLITHIUM L4 CLL, REDLITHIUM L4 CPL Manuale utente

Milwaukee

Milwaukee Heavy Duty 2270-20 Manuale utente

Milwaukee

Milwaukee PRO MW801 Manuale utente

Milwaukee

Milwaukee MI405 Manuale utente

Milwaukee

Milwaukee M12 3PL Manuale utente

Milwaukee

Milwaukee MC510 Manuale utente

Milwaukee

Milwaukee MW306 MAX Manuale utente

Milwaukee

Milwaukee 2235-40 Manuale utente

Milwaukee

Milwaukee MW102 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente