Minka Group MinkaAire DECO Guida

INSTRUCTION MANUAL WARRANTY CERTIFICATE

DECO

Patents, Trademark, and/or Copyright Laws.

The Minka-Aire® warranty is for one (1) year from the date of purchase from an authorized Minka-Aire® dealer.

This warranty is only valid to the original purchaser or user against all defects in material and workmanship (light bulbs

excluded) for one (1) full year. Additionally, Minka-Aire® warrants the motor only for the lifetime of the Minka Aire

ceiling fan (excluding wall controls and electrical components), to the original purchaser or user.

* The warranty is voided with the use of any non- Minka-Aire®electrical devices, E.g., wall controls or electrical dimmer switches, etc…

* The warranty is void once the original purchaser or user ceases to own the fan or the fan is moved from its original point of installation.

* The warranty is void with the use of any hanger bracket (non-Minka Aire or non-fan speciﬁc) other than the hanger bracket supplied & installed

with this speciﬁc fan.

Warranty Service Information

To obtain warranty service during the warranty period, the purchaser should return the fan with the sales receipt to the original place of

purchase. The authorized Minka-Aire® dealer, at its sole discretion, will either repair or replace the fan after verifying the legitimacy of the warranty

claim. Replacement is subject to availability of the same model. If the model is unavailable it will be replaced by one of equal value. This is a limited

warranty; the original purchaser or user is responsible for the cost of removal and reinstallation of repaired or replacement product.

To obtain the name of the Minka-Aire® authorized dealer nearest you call the Minka-Aire® customer care department at 1-800-307-3267, or

contact Minka-Aire® through www.minkagroup.net and select FAQ to answer any questions or if you require additional assistance submit the

question form found there.

Date Purchased Store Purchased Model Number F866L

CONTENTS

SAFETY RULES..........................................................................................

PACKAGE CONTENTS...........................................................................

INSTALLING THE FAN..........................................................................

HANGING THE FAN...............................................................................

ELECTRICAL CONNECTIONS............................................................

FINISHING THE INSTALLATION.....................................................

ATTACHING THE FAN BLADES........................................................

INSTALLING THE LTGHT KIT PLATE .....................................................

INSTALLING THE 24W LED ASSEMBLY ..............................................

OPERATING THE REMOTE CONTROL/WALL CONTROL............

CARE OF YOUR FAN......................................................................................

TROUBLESHOOTING...................................................................................

SPECIFICATIONS............................................................................................

1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267

SAFETY RULES

1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.

2. Be cautious! Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams.

3. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualiﬁed electrician

or consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.

4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7

feet from the ﬂoor and 18 inches from the tip of the blades to the wall.

5. If you are mounting the fan to a ceiling fan outlet box, use a U.L. Listed metal octagonal outlet box marked "Acceptable for Fan Support".

Secure the box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan

(at least 50 pounds) Do not use a plastic box.

6. Caution: To reduce the risk of injury use only the screws provided with the outlet box in conjunction with the lock washers provided

7. If you are mounting the fan to a joist, make sure it is able to support the moving weight of the fan (at least 50 pounds).

8. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling.

9. Do not insert anything into the fan blades while the fan is operating.

10. Turn the fan off and wait for the blades to stop completely before proceeding with maintenance or cleaning.

SUITABLE FOR USE IN

WET LOCATIONS

with the fan.

NOTE:

The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may

occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be

supplied by the person (s) installing, caring for and operating the unit.

NOTE:

READ AND SAVE ALL INSTRUCTIONS!

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OROTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX OR SUPPORTING SYSTEM MARKED

ACCEPTABLE FORFAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN CONJUCTION WITH THE LOCK WASHERS PROVIDED WITH

THE FAN. MOST OUTLET BOXES COMMONLY USEDFORFANSUPPORT OF LIGHTING FIXTURES ARE NOT ACCEPTABLE FORFANSUPPORT AND NEEDTO BE

REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF INDOUBT.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDERS WHILE INSTALLING, BALANCING THE BLADESORCLEANING THE FAN . DO NOT

INSERT FOREIGN OBJECTS BETWEEN ROTATINGFANBLADES.

TO REDUCE THE RISK OF FIRE ORELECTRONIC SHOCK,THIS FAN CAN ONLY USE FC880RS-DP SOLID-STATE SPEED CONTROL WITH

RC1000 REMOTE CONTROL ONLY

#10 x 1.5’’ Wood screws (2 PCs.)

#8 x 3/4’’ Machine screws (2PCs.)

Lock washers (2 PCs.)

4mm Star washers (2 PCs.)

Wire nuts (3 PCs. )

Washers (2 PCs.)

3/16’’ x 9mm Screws (18PCs + 1PC spare.)

Mounting hardware:

Blade attachment hardware:

Blade holder attachment hardware:

Balancing kit

Downrod Rubber Cover (1PC.)E.

PACKAGE CONTENTS

Unpack your fan and check the contents. Youshould have the following items:

2 mounting screws and 1.5V AAA

Battery (2 PCs.)

Fan blades (6 PCs.)

Blade holders (6 PCs.)

Hanger bracket

Canopy

Canopy cover

Standard downrod assembly(6’’)

Coupling cover

Fan motor/housing assembly

Light kit plate

24W LED assembly (LED light

10.

Receiver

11.

Remote control with holder and

12.

Extension power cord (18+24+24 inch)

13.

AAA1.5V

1/4’’ x12mm screws with lock washers

( 12 PCs Preassembled + 1PC spare)

kit +PC lens)

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.

INSTALLING THE FAN

MOUNTING OPTIONS

If there isn't an existing mounting box, then read the following instructions. Disconnect the

power by removing fuses or turning off circuit breakers.

Secure the outlet box directly to the building structure. Use appropriate fasteners and building

materials. The outlet box and its support must be able to fully support the moving weight of

the fan (at least 50 lbs.). Use a UL Listed metal outlet box. Do not use a plastic outlet box.

Figure 1, 2 and 3 are examples of different ways to mount the outlet box.

NOTE:

You may need a longer downrod to maintain proper blade clearance when installing on a

steep, sloped ceiling. Longer downrods are available from your Minka-Aire dealer.

To hang your fan where there is an existing ﬁxture but no ceiling joist, you may need to install

a hanger bar as shown in Fig. 4 (available at your Minka-Aire dealer).

FIG. 1

FIG. 3

FIG. 2

FIG. 4

CROSS BRACE

CEILING

JOIST

CEILING

jOIST

CEILING

JOIST

OUTLET BOX

PARALLEL WOOD BRACE

(MIN. 2" THICK)

OUTLET

BOX

OUTLET BOX

CEILING JOIST OR

CROSS BRACE

ANGLED CEILING

MAXIMUM 18 ANGLE

PROVIDE

STRONG

SUPPORT

RECESSED

OUTLET BOX

HANGER

OPENING

must be

FACING

UPSIDE

HANGER BAR

(OPTIONAL)

HANGER

BRACKET

WARNING:

All of the parts, hardware and components such as the

hanger bracket and hanger ball have been provided for your safety and

the proper installation of your new ceiling fan. The use of other parts,

hardware or components not supplied by Minka Aire with the fan will

void the Minka Aire Warranty.

REMEMBER to turn off the power. Follow the steps below to hang your

fan properly:

Step 1. Secure the Hanger Bracket to the ceiling outlet box using the screws

provided with your outlet box in conjunction with the lock-washers

provided with the fan. (Fig. 5)

Step 2. Loosen the two Set Screws and remove the Hitch Pin and Lock Pin

from the coupling located on the top of the Motor Assembly. (Fig. 6)

Step 3. Remove the Hanger Ball from the Downrod Assembly by loosening

the Set Screw and removing the Cross Pin. (Fig. 7)

Step 4. Carefully feed fan wires up through the downrod. (Fig. 8) Thread

Downrod into the Coupling until the holes are lined up and secure with

the LockPin and Hitch Pin previously removed, tighten Set Screws. (Fig. 9)

Step 5. Slip Coupling Cover, Canopy Cover and Canopy onto Downrod.

Carefully re-install the Hanger Ball onto the Downrod being sure that it's

properly positioned over the Cross Pin and the wires are not twisted,

tighten Set Screw. Place downrod rubber cover onto the hanger ball.(Fig. 9)

Step 6. Lift the Motor Assembly and place the Hanger Ball into the

Hanger Bracket. Rotate the Motor Assembly as needed until the check

groove from the Hanger Ball rests ﬁrmly over the registration tab from

the Hanger Bracket. Motor Assembly should not rotate if this is done

correctly. (Fig. 10)

HANGING THE FAN

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Minka Group Fan

Minka Group

Minka Group Minka Aire Sabot Guida

Minka Group

Minka Group minkaAire BARN Manuale utente

Minka Group

Minka Group minkaAire Ninety-Nine F899L-ORB Manuale utente

Minka Group

Minka Group minkaAire CONCEPT IV Guida

Minka Group

Minka Group Aire Roxhill Manuale utente

Minka Group

Minka Group MinkaAire Mesa F566 Manuale utente

Minka Group

Minka Group minkaAire VOLTERRA F702L-VB Guida

Minka Group

Minka Group minkaAire ALUMA Guida

Minka Group

Minka Group minkaAire CONCEPT I Guida

Minka Group

Minka Group Aire Roto F524 Guida

Minka Group

Minka Group minkaAire CONCEPT II WET Manuale utente

Minka Group

Minka Group Aire WELKIN Guida

Minka Group

Minka Group minkaAire Contractor Series Manuale utente

Minka Group

Minka Group Minka Aire GEANT Guida

Minka Group

Minka Group minkaAire Rainman F582L-SI Guida

Minka Group

Minka Group minkaAire JAVA LED F753L-CL Guida

Minka Group

Minka Group MinkaAire Java Manuale utente

Minka Group

Minka Group minkaAire CRISTAFANO F900L-BCW Guida

Minka Group

Minka Group minkaAire Contractor WATT F551 Manuale utente

Minka Group

Minka Group minkaAire Sundance F572-ORB Manuale utente

Minka Group

Minka Group MinkaAire Ultra-Max F588-SP Manuale utente

Minka Group

Minka Group minkaAire ALUMA WET Guida

Minka Group

Minka Group Minka-Aire Symbio Manuale utente

Minka Group

Minka Group Minka-Aire Java LED F753L Manuale utente

Manuali Fan popolari di altre marche

ELTA FANS

ELTA FANS H03VV-F Manuale utente

Hunter

Hunter 20714 Manuale di istruzioni

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuale utente

Hunter

Hunter Caraway Manuale di istruzioni

Panasonic

Panasonic FV-15NLFS1 Manuale utente

Kompernass

Kompernass KH 1150 Manuale utente

VES

VES FALA100/12V/TR Manuale utente

Vertiv

Vertiv Liebert DCD Manuale utente

Westinghouse

Westinghouse GFP Series Manuale utente

Venmar

Venmar KUBIX HRV PLUS Series Manuale utente

Maico

Maico ECR 31 Manuale utente

Sonnenkonig

Sonnenkonig Dinky Manuale utente

S&P

S&P ECOWATT HXBR Manuale utente

Wider

Wider IMP03369BH Manuale utente

Panasonic

Panasonic F-60DHN Manuale utente

Hinkley

Hinkley HIGHLAND Manuale utente

Broan

Broan 766BN Manuale utente

Premium

Premium PFS16022 Istruzioni per il montaggio

Minka Group minkaAire DECO Guida

Manuali Fan popolari di altre marche