Mobius M210 Manuale utente
USER GUIDE
©2020 ETEROS TECHNOLOGIES INC. ALL RIGHTS RESERVED. | UG2006M210
CONTENTS
This User Guide is a comprehensive manual covering the operation and maintenance of the Mobius
M210 Mill processing machine as of the date of publication. ETEROS TECHNOLOGIES reserves the right
to make updates to the machine from time to time. In the event of an update, this User Guide will
remain appropriate for the safe operation and maintenance of your unit. This User Guide, as well as
any documentation supplied by component manufacturers, are to be considered the information
package associated with this device. Every operator must read and understand the User Guide. The
manual should be located within easy access for periodic review.
NOTES:
SAFETY 4
SAFETY INSTRUCTIONS
DISCLAIMER
WARNING LABELS
SERVICE & REPAIRS
GENERAL SAFETY PRECAUTIONS
5
5
6
6
7
VOLTAGE CONFIGURATION
WHAT’S IN THE BOX
GET TO KNOW YOUR MOBIUS M210 MILL
DUST COLLECTION PORT
12
13
13
13
INITIAL SETUP 11
PREFACE 8
INTENDED USE OF EQUIPMENT
OPERATING CONDITIONS
SPECIFICATIONS
9
9
10
OPERATION 14
OPERATION PREP
CONTROL PANEL OVERVIEW
GENERAL OPERATION
SET-UP & ADJUSTMENTS
15
15
16
17
GENERAL 18
CLEANING
MAINTENANCE
LIFTING & MOVING
WARRANTY
TROUBLESHOOTING
19
19
19
20
21
MOBIUS MILL M210 USER GUIDE
4
SAFETY
5
MOBIUSTRIMMER.COM
SAFETY INSTRUCTIONS
To ensure operator safety while in use, this device includes decaling, guarding, and other safety features.
Operators are encouraged to use caution and best judgment when using equipment. Equipment
should be serviced when required.
To avoid possible damage to the machine and risk of injury to the operator, consult with an Eteros
Technologies representative to answer any questions.
This document refers to the ETEROS TECHNOLOGIES product milling machine as the MOBIUS M210 Mill.
Since this machine has a rotary milling unit, special safety precautions must be observed to reduce the
risk of personal injury. Careless or improper use may cause serious or even fatal injury. Please read and
understand these precautions thoroughly before using the machine.
All operators must read and understand this User Guide and be trained in safe operation and use of
the MOBIUS M210 MILL. We recommend the owner of this equipment develop a standard operating
procedure specic to each worksite to address any local hazards or other conditions not outlined in this
User Guide. The MOBIUS M210 MILL must be inspected regularly for damage, component failure, and
wear. Results of inspection activity should be documented.
Eteros Technologies makes every effort to ensure the MOBIUS M210 MILL is compliant with all current
safety standards. It is the responsibility of the owner to ensure all municipal, provincial, state, county,
territorial, and federal codes, regulations and standards have been met in each working location.
Do not lend or rent your machine without providing the User Guide. A rst-time operator should receive
practical instruction before using the machine.
This machine is not to be used for any purpose other than those expressly stated in the User Guide,
advertising literature or other Eteros Technologies written material pertaining to the MOBIUS M210 MILL.
Operators must be in good physical condition and mental health to operate this device. Under no
circumstances should the device be operated by anyone under the inuence of any substance,
including drugs or alcohol, which might impair vision, dexterity, or judgment. Do not operate the
MOBIUS M210 MILL when fatigued. Be alert - If tired while operating the device, take a break. Fatigue
may result in loss of control. Working with any equipment can be strenuous. If you have any condition
that might be aggravated by strenuous work, check with your doctor before operating the device.
DISCLAIMER
ETEROS TECHNOLOGIES recognizes that the MOBIUS M210 MILL is a purpose-built machine for processing
cannabis by licensed producers. Please check all municipal, provincial/state, and federal laws and
regulations before using the MOBIUS M210 MILL. ETEROS TECHNOLOGIES does not promote or condone
the use of processing equipment in any way that may be deemed illegal.
ETEROS TECHNOLOGIES recognizes that our equipment can be used for processing herbs, hops, owers
and many other products. It is not the responsibility of ETEROS TECHNOLOGIES to conrm alternative
applications for our equipment.
MOBIUS MILL M210 USER GUIDE
6
WARNING LABELS
SERVICE & REPAIRS
Indicates a hazardous situation that, if not avoided, will result in serious
injury and / or death. This signal word is to be limited to the most extreme
situations; typically for machine components that, for functional
purposes, cannot be guarded.
Indicates a potentially hazardous situation that, if not avoided, could
result in serious injury and / or death. It includes hazards that are exposed
when guards are removed. It may also be used to alert against unsafe
practices.
Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury. It may also be used to alert against
unsafe practices.
Repairs may only be carried out by Eteros Technologies or a designated authorized agent (service
technician).
Should the need arise, please notify:
ETEROS TECHNOLOGIES
502-130 INDUSTRIAL AVE.
CARLETON PLACE, ONTARIO, CANADA
K7C 3T2
www.ETEROS.com
Improper interfacing, improper repair, or unauthorized modication could result in void warranty claims.
CAUTION:
WARNING:
DANGER:
7
MOBIUSTRIMMER.COM
GENERAL SAFETY PRECAUTIONS
1. READ and become familiar with the entire User Guide. LEARN the equipment applications, limitations,
and possible hazards.
2. KEEP GUARDS IN PLACE and in working order including the upper product hopper.
3. DO NOT USE IN A DANGEROUS ENVIRONMENT or damp or wet locations. Never expose control
panel directly to rain or water. Keep work area well illuminated.
4. DO NOT use the device in the presence of ammable liquids or gases.
5. KEEP WORK AREA CLEAN. Cluttered areas and workspace invite accidents.
6. KEEP CHILDREN and BYSTANDERS AWAY from the device. Visitors should be kept at a safe distance
from the work area.
7. DON’T FORCE THE EQUIPMENT. It will operate optimally and safely at the rate for which it was
designed.
8. USE THE RIGHT TOOL. Don’t force the device to do a job for which it was not designed.
9. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective
hair covering to contain long hair.
10. ALWAYS OPERATE DEVICE IN A WELL-VENTILATED AREA. Dust generated from certain materials can
be a health hazard. Use a dust collection system whenever possible.
11. WEAR A FACE MASK OR DUST MASK. Milling operation may produce dust. If dust extraction is not
considered, a dust mask must be worn.
12. POWER DOWN AND DISCONNECT EQUIPMENT before servicing and when changing accessories,
such as screens, rotors, etc.
13. CHECK FOR DAMAGED PARTS PRIOR TO OPERATION. The equipment should be inspected prior to
use to ensure proper operation in performing its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may
affect its operation. Any damaged part including guards should be properly repaired or replaced.
14. ALWAYS WEAR EYE PROTECTION.
15. Hearing protection is generally not required when operating the M210. We recommend that noise
levels are monitored to ensure that all local, municipal, provincial and federal regulations and
recommendations are adhered to.
MOBIUS MILL M210 USER GUIDE
8
PREFACE
9
MOBIUSTRIMMER.COM
The M210 is designed and manufactured for the milling, grinding, blending and consistent particle size
reduction for cannabis and hemp. It should be used in a laboratory, clean room or production type
environment.
To optimize the performance of your M210 please ensure that your product is:
• Cannabis or Hemp
• Flower, leaf or trimmings
• Fully bucked or de-stemmed
• Dry to a moisture content of 8%-12%
NOTE: THIS DEVICE IS NOT TO BE OPERATED IN WET LOCATIONS.
OPERATING CONDITIONS
Location Indoor
Altitude 0 - 2000 metres above sea level
Temperature (ambient) 5•C - 25•C
Relative Humidity 25% - 75%
Voltage 115 V +/- 10%
230 V +/- 5%
Pollution Degree 2
Overvoltage Category II
*** SEE USER GUIDE FOR INPUT VOLTAGE CONFIGURATION ***
INTENDED USE
MOBIUS MILL M210 USER GUIDE
10
SPECIFICATIONS
Construction 304 Stainless Steel
Speed Adjustments 1 - 10
Number of Screens 7
Feed Motor 1/2 HP
Number of Milling Blades 6
Power Requirements
*** SEE USER GUIDE FOR INPUT
VOLTAGE CONFIGURATION ***
115V, 60Hz, 6AMPS or
230V, 50Hz, 6AMPS
Tool-less Disassembly Yes
Fits Through a 32” Door Yes
Width 28”
Length 28”
Height 52”
Weight 265lbs
Warranty 1 year
Certications CE and cLCus Certication
Accessories • Fine Screen
• Medium Screen
• Coarse Screen
• Custom Carts
• Custom Feed Hopper
Questo manuale è adatto per i seguenti modelli
1
Indice
