Monoprice PID 13271 Manuale utente
MONOPRICE
Portable Melody Bluetooth Speaker
PID 13271
User's Manual
2
SAFETY WARNINGS AND GUIDELINES
This device is not waterproof. Do not expose it to water or moisture of any kind.
If using this device in a humid environment, ensure that no condensation occurs.
Condensation can damage the speaker driver and/or short the internal
electronics.
Fully charge this device prior to use.
If left unused for a long period of time, the battery should be charged at least
once every three months to ensure that it remains capable of holding a full
charge.
This device has no user serviceable parts. Do not open the case or otherwise
attempt to modify this device.
INTRODUCTION
Thank you for purchasing this Portable Mini Melody Bluetooth Speaker!
This compact speaker features a wireless Bluetooth connection with a range of up to 32
feet (10 meters). It also includes a physical 3.5mm wired connection for ultimate
flexibility and convenience. The built-in microphone allows you to use this as a
speakerphone for making and receiving telephone calls using your Bluetooth-enabled
phone.
FEATURES
Wireless Bluetooth connection
Up to 32 feet (10 meters) wireless range
3.5mm auxiliary input
Built-in microphone for use as a speakerphone
Internal rechargeable battery
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have any
problem with your order, please give us an opportunity to make it right. You can contact
a Monoprice Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun:
9am-6pm PT) or via email at [email protected]
3
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service
for a replacement.
1x Portable Melody Bluetooth Speaker
1x Micro-USB charging cable
1x Quick user's guide
PRODUCT OVERVIEW
1. Volume - button
2. Previous Track < button
3. Multifunction button
4. Volume + button
5. Next Track > button
6. Microphone
7. Power switch
8. Micro-USB Charging port
9. 3.5mm AUX port
CHARGE LEVEL INDICATION
The LED indicator will begin flashing red when the battery charge level is low. When it
does, charge the speaker by following the instructions in the Charging section below.
Depending on your device, a battery level icon may appear on
screen. The icon will have a short, red bar when the charge level is
low.
4
CHARGING
This speaker features a built-in battery, which can be charged from any USB power
source. Perform the following steps to charge the speaker's battery:
1. Slide the Power switch (7) to the OFF position.
2. Plug the USB Micro-B end of the included charging cable into the Micro-USB
Charging port (8) on the speaker.
3. Plug the other end of the cable into a USB power source, such as a computer's
USB port or an AC adapter/wall charger.
4. The LED will blink red while charging, then will turn off when fully charged.
Note: The battery should be fully charged at least once every three months, even
if the speaker has gone unused during that time.
BLUETOOTH PAIRING
This speaker can be paired to a Bluetooth-enabled device either manually or
automatically, using NFC.
Manual Pairing
Perform the following steps to manually pair the speaker with your phone or other
Bluetooth device:
1. Slide the Power switch (7) to the ON position. The speaker will beep and the
LED indicator will begin to blink blue, indicating that the speaker is in Bluetooth
Pairing Mode.
Note: If the speaker is already paired to a device, the LED will instead glow blue
continuously. To unpair the speaker from the other device, press and hold the
Multifunction button (3) for about 3 seconds. The speaker will beep and the
LED will begin blinking blue, indicating that the speaker is ready to be paired with
another device.
2. Open the Bluetooth settings on your device and search for nearby Bluetooth
devices.
3. Locate and select the MP-13271 entry. If prompted for a passcode, enter 0000
(four zeroes). The speaker will beep and the LED indicator will stop blinking and
begin to glow blue continuously.
5
NFC Pairing
Perform the following steps to automatically pair the speaker with your phone or other
Bluetooth device using NFC:
1. Slide the Power switch (7) to the ON position.
2. Ensure that both Bluetooth and NFC are enabled on your device.
3. Touch your device to the NFC logo on the top left side of the speaker.
4. Your device may prompt you to affirm the
connection. If so, click the Yes option.
5. The speaker will automatically establish a
Bluetooth connection with your device. When the
process is completed, the speaker will beep and
the LED will cease blinking and begin to glow
blue continuously.
PAIRING WITH ANOTHER DEVICE
Although the speaker can be paired with multiple devices, it can only be paired with one
at a time. Perform the following steps to pair the speaker with a different device:
1. Slide the Power switch (7) to the ON position.
2. Press and hold the Multifunction button (3) for about 3 seconds. The speaker
will beep and the LED will begin blinking blue, indicating that the speaker is ready
to be paired with another device.
3. Follow the instructions in the Bluetooth Pairing section above.
DIRECT CONNECTION
If you cannot use a Bluetooth connection, you can use the speaker for audio playback
by connecting it to your device using a 3.5mm stereo audio cable (not included).
Perform the following steps to make a direct connection:
1. Plug one end of a 3.5mm stereo audio cable
(not included) into the AUX port (9) on the
speaker.
2. Plug the other end of the cable into the
headphone output jack on your audio device.
The LED will glow red when using a direct
connection.
Note that when using a direct connection, the volume control buttons on the
speaker are non-operative. Use the volume controls on your audio device to
control the volume level.
6
TELEPHONE CALLS
If you are using a Bluetooth connection with your phone, the speaker can be used as a
speakerphone for incoming and outgoing calls.
Incoming Calls
When you receive an incoming call, audio playback will automatically pause. You will
hear your phone's normal ringtone and the speaker will beep to indicate that an
incoming call has been received.
To answer the call, press the Multifunction button (3) once.
To reject the call, press and hold the Multifunction button (3) for about 2
seconds.
Once the call has been completed, press the Multifunction button (3) once to
terminate the call. Audio playback will automatically resume.
Outgoing Calls
You can use the speaker as a speakerphone when initiating a telephone call.
Use your phone as normal to initiate the call.
Use the speaker and the built-in microphone as a speakerphone during the call.
Press the Multifunction button (3) once to terminate the call.
AUDIO PLAYBACK CONTROL
When using a Bluetooth connection, the following buttons control audio playback:
Previous < (2): Press to skip back to the beginning of the current track. If already
at the beginning, press to skip back to the beginning of the previous track.
Volume - (1): Press to decrease the volume level.
Multifunction (3): Press to pause/resume playback.
Volume + (4): Press to increase the volume level.
Next > (5): Press to skip ahead to the beginning of the next track.
SLEEP MODE
If the speaker is powered on and no audio signal is present for about 4 minutes, it will
go into Sleep mode. Press the Multifunction button (3) once to exit Sleep mode.
7
TROUBLESHOOTING
Q1: I slide the Power switch to the ON position, but the LED remains off.
A1: Recharge the battery.
Q2: The volume is too low, even with the volume level set to maximum.
A2: Increase the volume level on your audio source device. For best results, set the
volume level on your source device to near maximum, then use the volume controls
on the speaker to adjust to a comfortable listening level.
Q3: The volume controls on the speaker have no effect.
A3: The volume controls on the speaker are non-operative when using a direct
connection. Switch to a Bluetooth connection to use the volume controls on the
speaker.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com during regular business hours, 7 days a week. You can also get
8
REGULATORY COMPLIANCE
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the
user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the
user’s authority to operate this device.
This device complies with IC RSS-210. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
EU Conformity with Applicable Directives
This equipment complies with the essential requirements listed below:
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
R&TTE Directive 1999/5/EC
RoHS Directive 2011/65/EU
WEEE Directive 2011/65/EU
Packaging & Packaging Waste Directive 94/62/EC
Batteries Directive 2006/66/EC
Indice
Altri manuali Monoprice Altoparlanti
Monoprice
Monoprice Pro Audio Series Manuale utente
Monoprice
Monoprice Harmony XL Manuale utente
Monoprice
Monoprice SB-200 Manuale utente
Monoprice
Monoprice 7495 Manuale utente
Monoprice
Monoprice 13706 Manuale utente
Monoprice
Monoprice MM-5 Manuale utente
Monoprice
Monoprice 14890 Manuale utente
Monoprice
Monoprice 33828 Manuale utente
Monoprice
Monoprice HarmonyMini Manuale utente
Monoprice
Monoprice 18586 Manuale utente
Monoprice
Monoprice 24760 Manuale utente
Monoprice
Monoprice NB-BT Manuale utente
Monoprice
Monoprice 44884 Manuale utente
Monoprice
Monoprice 14447 Manuale utente
Monoprice
Monoprice PID 11427 Manuale utente
Monoprice
Monoprice 36377 Manuale utente
Monoprice
Monoprice DT-5BT Manuale utente
Monoprice
Monoprice 10800 Manuale utente
Monoprice
Monoprice 34576 Manuale utente
Monoprice
Monoprice DT-3BT Manuale utente
