Moxa Technologies NPort 5110 Series Manuale utente

– 1 – – 2 – – 3 –

P/N: 1802051000012

NPort 5100 Series

Quick Installation Guide

Fourth Edition, April 2014

Overview

NPort 5100 series device servers are compact, palm-sized data

communication devices that allow you to control RS-232 (NPort

5110), RS-422/485 (NPort 5130), and RS-232/422/485 (NPort

5150) serial devices over a TCP/IP-based Ethernet.

Note: “-T” indicates an extended temperature model.

Package Checklist

Before installing the NPort 5100 series device server, verify that

the package contains the following items:

•1 NPort 5100 series 1-port serial device server

•100 to 240 VAC power adapter (excluding T models)

•4 stick-on pads

•Documentation and software CD

•Quick Installation Guide

•Warranty card

Optional Accessories

•DK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are

missing or damaged.

Hardware Introduction

As shown in the following figures, NPort 5100 series device servers

have one male DB9 port for transmitting RS-232 (NPort 5110),

RS-422/485 (NPort 5130), or RS-232/422/485 (NPort 5150) serial

data.

NOTE

The NPort 5110, NPort 5130, and NPort 5150 have the

same form factor.

Reset Button—Press the Reset button continuously for 5 sec to

load factory defaults: Use a pointed object, such as a straightened

paper clip or toothpick, to press the reset button. This will cause

the Ready LED to blink on and off. The factory defaults will be

loaded once the Ready LED stops blinking (after about 5 seconds).

At this point, you should release the reset button.

LED Indicators—NPort 5100’s top panel has three LED indicators,

which are described in the following table.

LED

Name

LED

Color

LED Function

Ready Red Steady on: Power is on and NPort is

booting up.

Blinking: Indicates an IP conflict, or

DHCP or BOOTP server is not responding

properly.

Green Steady on: Power is on and NPort is

functioning normally.

Blinking: The NPort has been located

by NPort Administrator’s Location function

Off

Power is off, or power error condition

exists.

Link Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection.

Off Ethernet cable is disconnected, or has a

short.

Tx/Rx

Orange

Serial port is receiving data.

Green Serial port is transmitting data.

Off

No data is being transmitted or received

through the serial port.

Adjustable pull high/low resistor for RS-422/485

(150 KΩ or 1 KΩ)

Jumpers are used

to set the pull

high/low resistor values. The default is

150 KΩ. Short the jumpers to set this

value to 1 KΩ. Do not use the KΩ

setting with RS

232 mode, since doing

so will degrade the RS

232 signals and

shorten the communication distance.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Hardware Installation Information

STEP 1: After removing the NPort 5100 series device server from

the box, connect the NPort 5100 series device server to a network.

Use a standard straight-through Ethernet cable to connect to a hub

or switch. When setting up or testing the NPort 5100 series device

server, you might find it convenient to connect directly to your

computer’s Ethernet port. In this case, use a cross-over Ethernet

cable.

STEP 2: Connect the NPort 5100 series device server’s serial port

to a serial device.

STEP 3: Connect the power adaptor.

STEP 4: Placement options

In addition to placing

the NPort 5100 on a

desktop or other

horizontal surface,

you may also make

use of the DIN-

Rail or

Wall Mount options,

as illustrated here.

Wall Mount DIN-Rail

Software Installation Information

To install NPort Administration Suite, insert the NPort

Document & Software CD into your computer’s CD-ROM drive.

Once the NPort Installation CD window opens, click on the

Installation button, and then follow the instructions on the

screen.

To view detailed information about NPort Administration Suite,

click on the Documents button, and then select “NPort 5100

Series User’s Guide” to open the pdf version of the user’s guide.

Pin Assignments

Ethernet Port Pinouts

Pin No.

Ethernet

Tx+

Tx-

Rx+

Rx-

NPort 5110—DB9 male (RS-232) port pinouts

Pin No.

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

–

NPort 5130—DB9 male (RS-422/485) port pinouts

Pin No.

RS-422/485-4W

RS-485-2W

TXD-(A)

–

TXD+(B)

–

RXD+(B)

Data+(B)

RXD-(A)

Data-(A)

GND

–

NPort 5150—DB9 male (RS-232/422/485) port pinouts

Pin No.

RS-232

RS-422/

485-4W

RS-485-2W

DCD

TXD-(A)

–

RxD

TXD+(B)

–

TxD

RXD+(B)

Data+(B)

DTR

RXD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

NPort 5110: 128.7 mA@12V, 72 mA@24V

NPort 5130: 200 mA@12V, 106 mA@24V

NPort 5150: 200 mA@12V, 106 mA@24V

Operating

Temperature

0 to 55°C (32 to 131°F), for standard

models

-40 to 75°C (-40 to 167°F), for -T models

Operating Humidity

5 to 95% RH

Dimensions 75.2 ×80 ×22 mm

(2.96 ×3.15 ×0.87 in)

including

ears

22 mm

(2.05 ×3.15 ×0.89 in)



without ears

Serial Line Protection

15 KV ESD for serial port

Magnetic Isolation

1.5 KV for Ethernet

Power Line Protection

Level 2 Burst (EFT), EN61000-4-4

Level 2 Surge, EN61000-4-5

Regulatory Approvals

FCC Class A, CE Class A, UL, LVD

Altri manuali per NPort 5110 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Moxa Technologies Server

Moxa Technologies

Moxa Technologies 5400 Manuale utente

Moxa Technologies

Moxa Technologies NPort 6450 Series Manuale utente

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Manuale utente

Moxa Technologies

Moxa Technologies ioLogik R2140 Manuale utente

Moxa Technologies

Moxa Technologies NPort 5210A Manuale utente

Moxa Technologies

Moxa Technologies NPort IA5000A Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 Manuale utente

Moxa Technologies

Moxa Technologies nport 5400 series Manuale utente

Moxa Technologies

Moxa Technologies NPort IA5150A Manuale utente

Moxa Technologies

Moxa Technologies NPort W2250A-T-EU Manuale utente

Moxa Technologies

Moxa Technologies NPort IAW5000A- I/O Manuale utente

Moxa Technologies

Moxa Technologies CN2500 Manuale utente

Moxa Technologies

Moxa Technologies NPort W2150A Manuale utente

Moxa Technologies

Moxa Technologies NPort 6150 Series Manuale utente

Moxa Technologies

Moxa Technologies ioLogik W5300 Series Manuale utente

Moxa Technologies

Moxa Technologies ioLogik E1210 Manuale utente

Moxa Technologies

Moxa Technologies CN2610 series Manuale utente

Moxa Technologies

Moxa Technologies NPort IA5250I/5250I-T Series Manuale utente

Moxa Technologies

Moxa Technologies EtherDevice Manuale utente

Moxa Technologies

Moxa Technologies NPort 5130 Manuale utente

Moxa Technologies

Moxa Technologies ioLogik 4000 Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 5600 Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 6450 Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 5100A Series Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente