Moxa Technologies NPort 5600-8-DT Manuale utente

P/N: 1802056001014

*1802056001014*

NPort 5600-8-DT

Quick Installation Guide

Edition 4.1, November 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The NPort 5600-8-DT Series includes the following models:

•NPort 5610-8-DT: 8 ports, RS-232, DB9

•NPort 5610-8-DT-J: 8 ports, RS-232, RJ45

•NPort 5650-8-DT: 8 ports, RS-232/422/485, DB9

•NPort 5650-8-DT-J: 8 ports, RS-232/422/485, RJ45

•NPort 5650I-8-DT: 8 ports, RS-232/422/485, DB9, optical isolation

Package Checklist

The NPort 5600-8-DT package should contain the following items:

•NPort 5600-8-DT 8-port serial device server

•Power cord and adapter

•DIN rail kit

•NPort documentation and software CD

•NPort 5600-8-DT Quick Installation Guide

Optional Accessories:

•DK-35A: DIN rail mounting kit (35 mm)

•CBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable, 150 cm

•CBL-RJ45F9-150: 8-pin RJ45 to female DB9 cable, 150 cm

•CBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable, 150 cm

•CBL-RJ45F25-150: 8-pin RJ45 to female DB25 cable, 150 cm

•NP21101: DB25-M to DB9-F RS-232 cable, 30 cm

NOTE

Please notify your sales representative if any of the above

items are missing or damaged.

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is out of this range, please

use a power adapter supplied by U

L Listed External Power

Supply (The power output meets SELV and LPS and rated 12

48 VDC, minimum current 0.73 A). Moxa has power adapters

with wide temperature range (

-40 to 75°C, -40 to 167°F), the

PWR-12150-(plug type)-SA-T series, for your reference.

- 3 -

Hardware Introduction

Top and Rear View

Front View (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT)

Front View (NPort 5610-8-DT-J, 5650-8-DT-J)

Reset Button

The reset button is used to load the factory defaults. Use a pointed

object to hold the reset button down for five seconds. You may release

the reset button when the Ready LED stops blinking.

- 4 -

LED Indicators

The LED indicators on the top panel are used to display status as

follows:

Name

Color

Function

PWR

Red

Power is on.

Off

Power is off.

Ready Green

Steady:

NPort is operational

Blinking:

NPort is responding to NPort

Administrator “Locate” function

Off

Power is off or fault condition exists.

Fault Red

IP conflict or DHCP or BOOTP server did not

respond properly.

Off

No fault condition detected.

Link

Green

Steady:

Network is connected, no data is

being transmitted.

Blinking:

Network is connected, data is

being transmitted.

Off

Ethernet cable is disconnected or has a

short.

InUse

(P1 to P8)

Green

Serial port has been opened by server side

software.

Off

Serial port is not currently opened by

server side software.

Tx/Rx

(P1 to P8)

Green (Tx)

Serial device is transmitting data.

Orange (Rx)

Serial device is receiving data.

Off

No data is flowing to or from the serial

port.

Hardware Installation

STEP 1: After removing the NPort 5600-8-DT from the box, place it on

a desktop or other horizontal surface. Connect the 12-48 VDC power

adaptor to the NPort 5600-8-DT’s power input when using an AC power

source, or connect the NPort 5600-8-DT’s terminal block directly to a

DC power source.

STEP 2: Use an Ethernet cable to connect the NPort 5600-8-DT to a

network hub or switch. You can also connect directly to your computer’s

Ethernet port, which is convenient for initial configuration or testing.

STEP 3: Connect the NPort 5600-8-DT’s serial port to a serial device.

Wall or Cabinet Mounting

The NPort 5600-8-DT comes with two metal attachment plates to allow

installation on a wall or the inside of a cabinet. First, attach the

brackets to the back of the NPort with screws. Next, mount the unit on

a wall or cabinet with screws. Screws should be less than 6.0 mm in

head diameter, and less than 3.5 mm in shaft diameter.

- 5 -

DIN Rail Mounting

DIN-rail attachments can be purchased separately to attach the product

to a DIN-rail. The DIN-rail attachments should be oriented with the

metal springs on top.

Standard Attachment

DK-35A Attachment

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your

application is out of this range, please

use a power adapter supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and rated 12

48 VDC, minimum current 0.73 A). Moxa has power adapters

with wide temperature range (

-40 to 75°C, -40 to 167°F), the

PWR-12150-(plug type)-SA-T series, for your reference.

Pull High/Low Resistors for RS-485

Use the set of DIP switches on the bottom panel to set the pull high/low

resistor values for each serial port. To access the switches, remove the

screws holding the DIP switch cover in place and flip open the cover.

There are three DIP switches for each port’s pull high/low resistors:

Pull High

Pull Low

Terminator

1KΩ

120Ω

Default



OFF

150KΩ

–

Software Installation Information

For the NPort’s configuration, the default IP address of the NPort

is:LAN: Static; IP = 192.168.127.254; netmask = 255.255.255.0

NOTE

If you have forgotten the NPort's IP address, use the Device

Search Utility (DSU) from your PC to locate the

NPort. After

searching the LAN for NPort units, the DSU will display the IP

address of each unit.

You may log in with the password moxa to change any setting to meet

your network topology (e.g., IP address) or serial device (e.g., serial

parameters). For first-time use, click the Wizard in the left navigation

- 6 -

panel. The wizard will prompt you to configure the IP address, SSID,

and security mode. For other settings, use the factory defaults or

modify the settings for your application.

For software installation, download the relative utilities from Moxa's

website:

https://www.moxa.com/support/support_home.aspx?isSearchShow=1

•Download the NPort Windows Driver Manager and install it as the

driver to run with Real COM mode of the NPort Series.

•Execute NPort Windows Driver Manager; then map the virtual COM

ports on your Windows platform.

•For Loopback Wiring:

。The NPort with RJ45 Port :

You may refer to the RJ45 Ports pin assignment section to loop

back pin 4 and pin 5 for the RS-232 interface to carry out a self test

on the device.

。The NPort with DB9 Male Serial Ports:

You may refer to the DB9 Male Ports pin assignment section to loop

back pin 2 and pin 3 for the RS-232 interface to carry out a self test

on the device.

•Use HyperTerminal or a similar program (you may download Moxa's

program, called PComm Lite) to test whether the device is good or

not.

Pin Assignments and Cable Wiring

RJ45 Ports (NPort 5610-8-DT-J, 5650-8-DT-J)

Pin RS-232 RS-422

4-wire RS-485

2-wire RS-

485

DSR

–

RTS

TxD+

–

GND

TxD

TxD-

–

RxD

RxD+

Data+

DCD

RxD-

Data-

CTS

–

DTR

–

NOTE

The NPort 5610-8-DT-J supports RS-232 only.

DB9 Male Ports (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT)

Pin RS-232

RS-422

4-wire RS-485

2-wire RS-

485

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

- 7 -

NOTE

The NPort 5610-8-DT supports RS-232 only.

RS-232 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

DSR

DTR

RTS

CTS

GND

TxD

RxD

TxD

DCD

CTS

RTS

DTR

DSR

RS-422, 4-wire RS-485 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

TxD+

RxD+

GND

TxD-

RxD-

RxD+

TxD+

RxD-

TxD-

2-wire RS-485 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

GND

Data+

Data-

Specifications

LAN

Ethernet Ports

2 × 10/100 Mbps (RJ45)

Protection

Built-in 1.5 kV magnetic isolation

Serial Interface

RS-232

NPort 5610-8-DT, 5610-8-DT-J

RS-232/422/485

NPort 5650-8-DT, 5650-8-DT-J, 5650I-8-

Serial Ports

8 (DB9-M or RJ45 connectors)

Isolation

2K VDC isolation (NPort 5650I-8-DT)

Serial Signals

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

- 8 -

RS-422

Tx+, Tx-, Rx+, Rx-, GND

RS-485 (2-wire)

Data+, Data-, GND

RS-485 (4-wire)

Tx+, Tx-, Rx+, Rx-, GND

Serial Line Protection

15KV ESD for all signals

RS-485 Data Direction

ADDC™ (Automatic Data Direction Control)

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data Bits

5, 6, 7, 8

Stop Bit(s)

1, 1.5, 2

Flow Control

RTS/CTS, DSR/DTR (for RS-232 only),

XON/XOFF

Transmission Speed

50 bps to 921.6 Kbps

Power Requirements

Power Input

12 to 48 VDC

Mechanical

Operating Temperature

0 to 55°C (32 to 131°F), 5 to 95% RH

Storage Temperature

-20 to 70°C (-4 to 185°F), 5 to 95% RH

Material

SECC sheet metal (0.8 mm)

Dimensions (W × D × H)

With wall-mount:

With DIN-rail kit:

197 × 44 × 125 mm

229 × 46 × 125 mm

197 × 52.8 × 125 mm

Power Line Protection

2 KV Surge, EN61000-4-5

Certifications

Regulatory Approvals

FCC Class A, CE Class A, UL, CUL, LVD

Warranty

5 years

Altri manuali per NPort 5600-8-DT

Indice

Altri manuali Moxa Technologies Server

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series Manuale utente

Moxa Technologies

Moxa Technologies EtherDevice Manuale

Moxa Technologies

Moxa Technologies NPort IA5250I/5250I-T Series Manuale utente

Moxa Technologies

Moxa Technologies NPort IA5150 series Manuale utente

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 6450 Series Manuale utente

Moxa Technologies

Moxa Technologies CN2610 series Manuale utente

Moxa Technologies

Moxa Technologies NPort 5200-P Series Manuale utente

Moxa Technologies

Moxa Technologies MIINEPORT E1 Manuale utente

Moxa Technologies

Moxa Technologies NPort IA5150AI Manuale utente

Moxa Technologies

Moxa Technologies NPort 5100A Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 6150 Series Manuale utente

Moxa Technologies

Moxa Technologies NPort Express DE-211 Manuale

Moxa Technologies

Moxa Technologies NPort 5100 Series Manuale utente

Moxa Technologies

Moxa Technologies ioLogik R2140 Manuale utente

Moxa Technologies

Moxa Technologies NPort 5200 Serie Manuale utente

Moxa Technologies

Moxa Technologies NPort 6150 Series Manuale utente

Moxa Technologies

Moxa Technologies NPort Express DE-211 Manuale utente

Moxa Technologies

Moxa Technologies NPort P5250A Series Manuale utente

Moxa Technologies

Moxa Technologies CN2500 Manuale utente

Moxa Technologies

Moxa Technologies NPort P5150A Series Manuale utente

Moxa Technologies

Moxa Technologies NPort 6450 Series Manuale utente

Moxa Technologies

Moxa Technologies NPort W2150 Plus Manuale utente

Moxa Technologies

Moxa Technologies NPort 5230 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente