MR MESSKO EI100 Manuale utente
Electronic remote display
MESSKO® EI100/EI160
Operating instructions
7304833/00 EN
© All rights reserved by Maschinenfabrik Reinhausen
Dissemination and reproduction of this document and use and disclosure of its
content are strictly prohibited unless expressly permitted.
Infringements will result in liability for compensation. All rights reserved in the event
of the granting of patents, utility models or designs.
The product may have been altered since this document was published.
We reserve the right to change the technical data, design and scope of supply.
Generally the information provided and agreements made when processing the
individual quotations and orders are binding.
The original operating instructions were written in German.
Table of contents
37304833/00 EN
1 Introduction...........................................................................6
1.1 Manufacturer.................................................................................... 6
1.2 Completeness.................................................................................. 6
1.3 Safekeeping..................................................................................... 6
1.4 Notation conventions ....................................................................... 6
1.4.1 Hazard communication system .................................................................... 6
1.4.2 Information system....................................................................................... 7
1.4.3 Instruction system ........................................................................................ 8
1.4.4 Typographic conventions ............................................................................. 8
2 Safety...................................................................................10
2.1 Appropriate use ............................................................................. 10
2.2 Inappropriate use........................................................................... 10
2.3 Fundamental safety instructions .................................................... 11
2.4 Personnel qualification................................................................... 13
2.5 Personal protective equipment ...................................................... 13
3 Product description............................................................15
3.1 Scope of delivery ........................................................................... 15
3.2 Function description....................................................................... 15
3.3 Design............................................................................................ 15
3.4 Versions......................................................................................... 18
4 Packaging, transport and storage ....................................19
4.1 Packaging ...................................................................................... 19
4.1.1 Suitability, structure and production .......................................................... 19
4.1.2 Markings..................................................................................................... 19
4.2 Transportation, receipt and handling of shipments........................ 20
4.3 Storage of shipments..................................................................... 21
Table of contents
4 7304833/00 EN
5 Mounting .............................................................................22
5.1 Mounting the remote display.......................................................... 22
5.1.1 EI100 mounting with support...................................................................... 22
5.1.2 EI100 mounting with clamping bracket ...................................................... 23
5.1.3 EI160 mounting with vibration-damping plate ............................................ 24
5.2 Electromagnetic compatibility ........................................................ 25
5.2.1 Wiring requirement of installation site ....................................................... 25
5.2.2 Wiring requirement of operating site ......................................................... 25
5.3 Connecting cables to the system periphery................................... 26
5.4 Electrical connection...................................................................... 27
5.4.1 Cable recommendation .............................................................................. 27
5.4.2 Mounting the cable gland ........................................................................... 28
5.4.3 Connecting the supply voltage ................................................................... 33
5.4.4 Connecting the sensor inputs..................................................................... 35
5.5 Function test .................................................................................. 36
6 Maintenance, care and servicing ......................................38
7 Disposal...............................................................................39
7.1 SVHC information in accordance with the REACH regulation....... 39
8 Technical data.....................................................................40
8.1 Housing.......................................................................................... 40
8.2 Ambient conditions ........................................................................ 40
8.3 Inputs ............................................................................................. 41
9 Drawings .............................................................................42
9.1 Dimensions .................................................................................... 42
9.1.1 10157298 ................................................................................................... 43
9.1.2 10157707 ................................................................................................... 44
9.1.3 10158064 ................................................................................................... 45
Table of contents
57304833/00 EN
9.2 Circuit diagrams............................................................................. 46
9.2.1 10158333 ................................................................................................... 47
9.2.2 10158343 ................................................................................................... 48
9.2.3 10159230 ................................................................................................... 49
9.2.4 10159231 ................................................................................................... 50
9.2.5 10159242 ................................................................................................... 51
9.2.6 10159243 ................................................................................................... 52
9.2.7 10159914 ................................................................................................... 53
9.2.8 10159952 ................................................................................................... 54
9.2.9 10160107 ................................................................................................... 55
9.2.10 10160263 ................................................................................................... 56
Glossary ..............................................................................57
1 Introduction
6 7304833/00 EN
This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.
It also includes safety instructions and general information about the prod-
uct.
This technical file is intended solely for specially trained and authorized per-
sonnel.
1.1 Manufacturer
Maschinenfabrik Reinhausen GmbH
Falkensteinstrasse 8
93059 Regensburg
Germany
Tel.: +49 941 4090-0
E-mail: [email protected]
Internet: www.reinhausen.com
MR Reinhausen customer portal: https://portal.reinhausen.com
Further information on the product and copies of this technical file are avail-
able from this address if required.
1.2 Completeness
This technical file is incomplete without the supporting documents:
▪ Order confirmation
1.3 Safekeeping
Keep this technical file and all supporting documents ready at hand and ac-
cessible for future use at all times.
1.4 Notation conventions
1.4.1 Hazard communication system
Warnings in this technical file are displayed as follows.
1 Introduction
77304833/00 EN
1.4.1.1 Warning relating to section
Warnings relating to sections refer to entire chapters or sections, sub-sec-
tions or several paragraphs within this technical file. Warnings relating to
sections use the following format:
WARNING
Type of danger!
Source of the danger and outcome.
► Action
► Action
1.4.1.2 Embedded warning information
Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:
DANGER! Instruction for avoiding a dangerous situation.
1.4.1.3 Signal words
Depending on the product, the following signal words are used:
Signal word Meaning
DANGER Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE Indicates measures to be taken to prevent damage to property.
Table1: Signal words in warning notices
1.4.2 Information system
Information is designed to simplify and improve understanding of particular
procedures. In this technical file it is laid out as follows:
1 Introduction
8 7304833/00 EN
Important information.
1.4.3 Instruction system
This technical file contains single-step and multi-step instructions.
Single-step instructions
Instructions which consist of only a single process step are structured as fol-
lows:
Aim of action
üRequirements (optional).
► Step 1 of 1.
ðResult of step (optional).
ðResult of action (optional).
Multi-step instructions
Instructions which consist of several process steps are structured as follows:
Aim of action
üRequirements (optional).
1. Step 1.
ðResult of step (optional).
2. Step 2.
ðResult of step (optional).
ðResult of action (optional).
1.4.4 Typographic conventions
Typographic convention Purpose Example
UPPERCASE Operating controls,
switches
ON/OFF
[Brackets] PC keyboard [Ctrl] + [Alt]
Bold Software operating con-
trols
Press Continue button
1 Introduction
97304833/00 EN
Typographic convention Purpose Example
…>…>… Menu paths Parameter > Control pa-
rameter
Italics System messages, error
messages, signals
Function monitoring alarm
triggered
[► Number of pages] Cross reference [► Page 41].
Dotted underscore
.............................................
Glossary entry, abbrevia-
tions, definitions, etc.
Glossary entry
........................
Table2: Typographic conventions used in this technical file
2 Safety
10 7304833/00 EN
▪ Read this technical file through to familiarize yourself with the product.
▪ This technical file is a part of the product.
▪ Read and observe the safety instructions provided in this chapter.
▪ Read and observe the warnings in this technical file in order to avoid func-
tion-related dangers.
▪ The product is manufactured on the basis of state-of-the-art technology.
Nevertheless, risks to life and limb for the user or impairment of the prod-
uct and other material assets due to the function may arise in the event of
improper use.
2.1 Appropriate use
The product is designed solely for use in stationary large-scale systems.
If used as intended, in compliance with the requirements and conditions
specified in this technical document and observing the warning notices in
this technical document and attached to the product, the product does not
pose a risk of injury or damage to property or the environment. This applies
throughout the service life of the product, from delivery, installation and oper-
ation to removal and disposal.
The following is considered intended use:
▪ Operate the product in accordance with this technical document, the
agreed-upon delivery conditions and the technical data.
▪ Ensure that all necessary work is performed by qualified personnel only.
▪ Only use the devices supplied for the intended purpose and in accordance
with the specifications in this technical document.
▪ Observe the notices in this technical document regarding electromagnetic
compatibility and the technical data.
2.2 Inappropriate use
Use is considered inappropriate if the product is used other than as de-
scribed in the Appropriate use section. In addition, observe the following:
▪ The product is not a protective device. Do not use it to handle safety-re-
lated functions.
▪ Risk of explosion and fire from highly flammable or explosive gases, va-
pors or dusts. Do not operate the product in areas at risk of explosion.
Altri manuali per MESSKO EI100
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali MR Strumento di misura
MR
MR MESSKO MFLOC 2.0 Manuale utente
MR
MR MSENSE DGA 9 Manuale utente
MR
MR YD-200 Manuale utente
MR
MR MESSKO BeTech Manuale utente
MR
MR MESSKO MMK Manuale utente
MR
MR TAPCON LV Manuale utente
MR
MR MSENSE DGA 2/3 Manuale utente
MR
MR MSENSE BM Manuale utente
MR
MR MESSKO PQ96 Manuale utente
MR
MR MESSKO MFLOC 2.0 Manuale utente
