USER MANUAL
SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury from re or electric shock, please ensure compliance with safety instructions when using this
device. Please read the instructions carefully and make sure that you have understood them well. Keep the
manual near the equipment to be able to read it at any time. Always use current sources connected to the
ground and providing the necessary voltage (indicated on the label on the device). If you have any doubt, let
an electrician check that your outlet is properly grounded. Never use a damaged power cable. Do not open
the unit in damp or wet environment, or if your hands or body are damp or wet. Protect the unit from solar
radiation. Use the device in a protected place to avoid damaging the equipment or endangering others. Make
sure the device is able to cool and avoid placing it too close to other devices that produce heat. Before
cleaning, disconnect it from the power source. Use a soft damp cloth for cleaning. Avoid using detergents
and make sure that no liquid enters the unit. No internal element of this device needs to be maintained by
the user. Opening the device without our approval leads to a loss of warranty!
SAFETY GUIDELINES
1. Please read and understand these instructions carefully before operating the device! Please observe the
safety guidelines carefully in order to prevent damages through improper use!
2. Please keep this manual available for future reference. If this device is passed on to third parties, the
manual must be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting from improper use or incorrect operation.
5. Before the rst use, check whether the main voltage type and the current comply with the indicated
data on the type plate.
6. This device is not intended to be used by persons (including children) with limited physical, sensory
or mental aptitude or lack of experience and/or knowledge, unless they are supervised by a person
responsible for their safety or have received instruction from this person as to how the device is used.
7. ELECTRIC SHOCK HAZARD! Do not attempt to repair the unit by yourself. In case of device failures,
repairs must be done by qualied experts.
8. Please check the main plug and power cable regularly. If the power cable for this device is damaged, it
has to be replaced by the manufacturer or its customer service or another qualied person in order
to prevent hazards.
9. Prevent damages to the power cable by avoiding squeezing or bending it or rubbing it on sharp edges.
Also keep the power cable away from hot surfaces and open ames.
10. ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
11. Under no circumstances should the housing be opened.
12. Do not insert any items into the packing machine.
13. Do not use the packing machine un humidity.
14. Do not use the machine in the presence of ammable and chemically aggressive fumes.
Operation manual must be reviewed.
Never dispose of electrical equipment together with household waste.
This machine conforms to the CE declarations.
Attention! Your hand may get squeezed
SYMBOLS
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details it
may differ from the actual machine.
The original operation manual is in German. Other language versions are translations from German.
15. Do not use the machine for packing hazardous, ammable and chemically aggressive items.
16. When closing the device, do not put your hands under the cover.
17. If a technical defect is identied, immediately stop the operation and do not use the device until the
defect has been repaired.
18. When transporting and handling the vacuum packing machine between the warehouse and the
destination, take into account the occupational health and safety principles for manual transport
operations which apply in the country where the vacuum packing machine will be used.
19. Never operate the machine without a vacuum bag inside.
20. Pay particular attention when opening the cover – danger of impact.
21. The device may be operated by persons who are physically t, have been appropriately trained, have
read these instructions and have been trained within the scope of occupational health and safety.
TECHNICAL DATA
Product name Vacuum Packing Machine Vacuum Packing Machine
Model MSW-VPM-900K MSW-VPM-900K
Catalogue no 6153 6154
Rated voltage [V] 230~ 230~
Frequency [Hz] 50 50
Rated power [W] 900 900
Vacuum chamber dimensions [mm] 445 x 440 x 75 445 x 440 x 75
Seal length [mm] 400 400
Maximum thickness of sealed material [mm] 0,5 0,5
Vacuum time range [s] 0 – 99 0 – 99
Heat sealing time range [s] 0 – 9,9 0 – 9,9
Pump performance [m³/h] 20 20
Sound pressure level LpA [dB(A)] 65 65
SCOPE OF THE APPLICATION
The vacuum packing machine is designed for vacuum pack products using lm and other packing materials.
Do not use the vacuum packing machine for packing hazardous, ammable and chemically aggressive items.
The user is liable for any damage resulting from non-intended use of the device!
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
10 Rev. 05.04.2017 11
Rev. 05.04.2017
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
The temperature of environment must not be higher than 45 °C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is to be used.
