Norac UC4.5 Manuale utente
Summers
(Main Lift and Enhanced Stability Option)
Installation Manual
SM3
Printed in Canada
Copyright 2012 by NORAC Systems International Inc.
Reorder P/N: UC4.5-SM3-INST Rev C (Summers Main Lift and Enhanced Stability Option)
NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and
without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information
contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.
Contents
1Introduction................................................................................................................ 1
2Kit Parts ...................................................................................................................... 2
3Hydraulic Installation ................................................................................................ 5
4Main Lift Sensor Installation..................................................................................... 7
5Roll Sensor Installation.............................................................................................. 8
6Electrical Installation ............................................................................................... 10
7Software Setup......................................................................................................... 12
8Cable Drawings ........................................................................................................ 13
1
1Introduction
Congratulations on your purchase of the NORAC UC4.5 Spray Height Control System. This
system is manufactured with top quality components and is engineered using the latest
technology to provide operating reliability unmatched for years to come.
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly.
Please take the time to read this manual completely before attempting to install the system. A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system.
Your input can help make us better! If you find issues or have suggestions regarding the parts
list or the installation procedure, please don’t hesitate to contact us.
Every effort has been made to ensure the accuracy of the information contained in
this manual. All parts supplied are selected to specially fit the sprayer to facilitate
a complete installation. However, NORAC cannot guarantee all parts fit as
intended due to the variations of the sprayer by the manufacturer.
Please read this manual in its entirety before attempting installation.
2
2Kit Parts
2.1 Hydraulic Plumbing
Figure 1: SM3 Hydraulic Plumbing
3
2.2 List of Parts
The following tables list the Summers main lift and enhanced stability kit (SM3) specific parts of
the NORAC UC4.5 system. This kit is to be used when installing the proportional main lift
option with existing Summers installations.
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1
C07 43220-01 CABLE UC5 NETWORK 14 AWG 1M 2
C17 44658-45D CABLE UC4 VALVE MAIN DT 1
E04 43741 UC5 ROLL SENSOR VER. 2 1
E05 43750 UC5 ULTRASONIC SENSOR 1
E10 43760 UC5 NETWORK COUPLER 3-WAY 1
E12 43764 UC5 NETWORK COUPLER 2-WAY 1
H01 44863-01 HOSE ASSEMBLY 122R2-06 36 IN L 6FJX 6FJX 1
H10 44865-50 HYDRAULICS FITTING KIT - SM3 1
M01 UC4.5-SM3-INST MANUAL INSTALLATION UC4.5 SUMMERS MAIN LIFT AND ENHANCED STABILITY 1
V01 44962D VALVE ASSEMBLY EXPANSION DPOC PROP DT 4 BOLT 1
4
2.3 Hydraulic Fitting Kit Details (P/N: 44865-50)
Item Part Number Name Quantity
Picture
F02 103839 TEE - 6FJXR 6MJT 1
F03 104369 PLUG - 6MBP 1
F04 103312 MALE ADAPTER - 6MB 6MJ 1
F05 44926 ORIFICE INSERT 3/64 UC3 VALVE BLOCK 1
6 M B - 6 M OR X 90
SIZE IN
1/16TH'S
GENDER: MALE
OR FEMALE
90° ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.
5
3Hydraulic Installation
Ensure all pressure has been bled from the system before disconnecting any lines
or fittings. Hydraulic pressure will exist on the main lift circuit unless the main lift
is all the way down.
Component failure due to oil contamination is not covered under the NORAC
UC4.5 system warranty. It is recommended that a qualified technician perform the
hydraulic installation.
3.1 Expansion Block Assembly
1. Use Figure 1 as a reference for installing the hydraulics.
2. Loosen the existing 2-station valve block so that it can be moved and/or twisted for the
installation of the expansion block.
3. Remove the four 4MBP plugs from the 2 station valve block (Figure 2).
4. Coat the four o-rings in hydraulic oil and install them into the expansion block. Ensure the
o-rings are seated properly.
5. Attach the expansion block to the 2 station block using the included spring washers and
bolts.
6. Tighten the bolts to 31 ft-lbs.
Figure 2: NORAC Expansion Block Assembly
6
3.2 Hydraulic Plumbing
1. Remove all plastic plugs from the NORAC expansion valve block (V01).
2. Insert the orifice (F05) into the “B” port of the expansion block.
3. Install the 6MB 6MJ fitting (F04) into the “B” port of the expansion block.
4. Install the 6MBP plug (F03) into the “A” port of the expansion block.
5. If the valve block is not already installed on the sprayer, install it as outlined in the UC4.5
Spray Height Control installation manual.
6. Attach hose H01 to the “B” port on the expansion block. Route the free end of the hose
to the Summers valve block.
7. Tee in H01 to the existing main lift line on the Summers valve block, using the tee fitting
(F02).
Ensure no hydraulic components will interfere with any sprayer parts or be pulled
tight at any time.
7
4Main Lift Sensor Installation
1. Assemble and mount the main lift sensor bracket as shown in Figure 3.
2. Mount the sensor onto the sensor mounting collar (Figure 3).
Figure 3: Main Lift Sensor Mounted in the Correct Location
Altri manuali per UC4.5
31
Indice
Altri manuali Norac Sistema di controllo
Norac
Norac RG11 Manuale utente
Norac
Norac UC5 Topcon X30 Manuale utente
Norac
Norac UC5-CAB-HG06-HG07 Manuale utente
Norac
Norac UC5 HD12 Manuale utente
Norac
Norac UC5 Topcon X30 Guida rapida
Norac
Norac UC5 Topcon X30 Manuale utente
Norac
Norac UC5 MAX Manuale utente
Norac
Norac UC4+ Manuale utente
Norac
Norac UC4.5 Manuale utente
Norac
Norac Case AFS Pro 300 Manuale utente
Norac
Norac UC4 Total Control Manuale utente
Norac
Norac UC5 Topcon X30 Manuale utente
Norac
Norac UC4+ Manuale utente
Norac
Norac UC5 Topcon X30 Manuale utente
Norac
Norac Case 44 Series Manuale utente
Norac
Norac Rogator 700 Series Manuale utente
Norac
Norac UC5 Rogator 600 Manuale utente
Norac
Norac UC5 Topcon X30 Manuale utente
Norac
Norac UC5 Topcon X30 Manuale utente
Norac
Norac UC5 Topcon X30 Manuale utente
