NUTRIBULLET Blender Combo Manuale utente

User guide.

Save these instructions!

FOR HOUSEHOLD USE ONLY

consecutive blending

cycles that exceed one

minute total.

• Blending causes

ingredients to heat up,

which builds pressure

in the Cup over time.

Continuous blending for

more than one minute

may cause the Cup

to separate, exposing

the blade or expelling

heated contents and

causing injury.

DO NOT leave blended

foods in a sealed cup

for prolonged periods

of time.

• Blended mixtures can

spoil and ferment,

increasing pressure

when left inside the

Cup. This may cause

the Cup to separate if

open from the Motor

Base, which may result

in bodily injury from

expelling hot contents

or exposed blades.

• Only access the

blended contents

through the Sip and

PERSONAL SAFETY

Failure to follow all

instructions regarding

your nutribullet®

Portable Blender

may result in serious

personal injury, death,

or property damage.

DO NOT blend hot,

warm, carbonated,

or eervescent

ingredients.

Remove all utensils

and non-food items

from Cup before

operating as it may

result in bodily injury or

damage to the blade

and unit.

• Only blend room-

temperature,

refrigerated or frozen

ingredients (21°C or

cooler). Always check

all ingredients before

blending.

• Such use may over-

pressurize the

nutribullet®Cup,

causing the Cup and

Important safeguards.

When operating your nutribullet® Portable Blender, remember:

SAFETY COMES FIRST

Warning! To avoid the risk of serious injury or damage, carefully

read all instructions before operating your nutribullet® Portable

Blender. Basic safety precautions, including the following

important information, should always be observed when using

any electrical appliance.

If you let anyone else use your nutribullet®Portable Blender, ensure

they understand the health and safety information in this User

Guide and any additional safety or usage instructions. Each person

using a device should completely read the User Guide to become

familiar with the safe operation of the unit.

Motor Base to separate

while operating. This

may result in bodily

injury from expelling

hot content or

exposed blades.

• Carbonated and

eervescent ingredients

(e.g., soda, baking

powder, baking soda,

yeast, some batters,

cake mix, dry ice,

or other things that

become bubbly) release

gasses that increase

pressure within the Cup

when blending. A build

up of pressure can

cause the cup

to separate from the

blade expelling the

contents of the cup

and causing injury.

Some protein powders

include eervescent

ingredients. Always

check the ingredients

of all supplements

before blending.

DO NOT blend contents

for more than one

minute. Do not run

WARNING!

Carry Lid by carefully

opening the Lid after

blending.

• If the Cup is hot or

warm to the touch,

the contents may

be HEATED and

PRESSURIZED.

If this happens, take

these steps:

- LEAVE ALONE, DO

NOT OPEN. Leave

the Cup where it is

and do not touch it or

allow others to touch

it. NEVER attempt

to separate the Cup

from the Motor Base

as this can result in

bodily injury.

- Do not blend again.

- Allow the Cup to cool

for at least 30 minutes.

If still warm, allow for

more cooling time.

- Once cool to the

touch, slowly open

the Lid, while pointing

away from your

face and body. Pour

contents out into a

separate vessel.

• ALWAYS ensure the Cup

is securely locked on

the Motor Base before

blending. The motor will

not turn on unless the

Cup is situated in the

locked position.

• ONLY operate the

unit with the Lid

cover in place.

• DO NOT exceed the

MAX line. Exceeding the

MAX line can result in

leakage or stop page of

the blade.

• DO NOT remove the

Cup or Lid while the unit

is in operation.

• DO NOT overﬁll the Cup

with ice as it may stop

the blades from turning

resulting in damage

to the unit or injury.

Always make sure the

liquid and ingredients

do not exceed MAX line

before blending.

• Do not use the Cup if

you detect cracking,

cloudiness, or

other damage.

• Do not attempt to

defeat any safety

interlock mechanisms.

• To avoid the risk of

electrical shock, ﬁre or

bodily injury, DO NOT

charge or handle the

unit if it is wet, or in an

area that could get

wet, or handle with

wet hands.

• Do not charge your

device around

ﬂammable materials,

on your bed or couch,

or on top of any type

of paper.

• Only charge your

device with the power

cord that came with

it. Using incompatible

parts or aftermarket

parts may damage your

nutribullet®Portable

Blender or create safety

hazards that may

cause personal injury

or damage.

• Do not use a rapid

charger or higher

wattage charger.

• Failure to take the

following precautions

can result in serious

personal injury, death

from electric shock or

ﬁre, or damage to

your device.

• Don’t charge or store

batteries or devices

on combustible or

insulating surfaces

such as beds, sofas,

or carpet, and keep

them away from highly

ﬂammable materials

such as blankets,

clothing, and paper.

• Do not charge in an

area of extreme

heat or cold.

• Only order replacement

parts from:

bulletbrands.com.au /

bulletbrands.co.nz

or by contacting

Customer Service:

AU: 1300 285 538 /

NZ: 0800 232 633.

Blades are sharp!

Handle with care to

avoid bodily injury.

•Do not touch the sharp

edges of the blades.

• Do not place hands

or ﬁngers near

the blades when

attaching the Cup to

the Motor Base.

• Handle with care

when washing the

blade by hand.

• Always make sure the

power is o and the

charger is unplugged

when assembling,

disassembling, or

cleaning the blade or

Motor Base.

• Do not store the

Motor Base with the

blades exposed.

Always attach the Cup

to the Motor Base.

NEVER put your hands

inside the cup or near

the blade when the unit

is running.

• Do not remove the

Cup or Lid until the

blades have completely

stopped. Blades can

still be rotating when

the Lid is removed.

Not following these

instructions may

result in bodily injury,

property damage, or

damage to your unit.

• This appliance is not

intended for use by

persons (including

children) with reduced

physical, sensory, or

mental capabilities,

or lack of experience

and knowledge,

unless they are closely

supervised and

instructed concerning

use of the appliance by

a person responsible

for their safety.

Close supervision is

necessary when any

appliance is used by or

near children. Children

should be supervised

to ensure that they

do not play with the

appliance.

PRODUCT SAFETY

Discontinue use if

the blade is bent

or damaged.

• Routinely inspect the

blades for damage,

and if detected, contact

Customer Service for

a replacement.

• Do not blend stone

fruit in this appliance

unless pits/seeds

have been removed.

Hard ingredients may

damage the blade.

• The blades may stop

turning if the Cup is

overﬁlled. If this occurs,

please refer to the

Errors section in this

User Guide.

DO NOT operate your

nutribullet®Portable

Blender while driving,

operating machinery,

cycling, walking,

or engaging in

other activities

that require your

undivided attention.

• Do not expose your

nutribullet®Portable

Blender to extreme

temperatures, as this

can cause damage

to the batteries,

seals, and other

parts of the device.

• Do not place your

nutribullet®Portable

Blender on uneven or

unstable surfaces.

• Do not dry your

device with a hair

dryer, clothes dryer,

conventional oven, or

microwave oven. If your

device becomes wet,

gently wipe the exterior

with a clean, dry cloth.

• Do not use your

device near water

or in wet, rainy, or

snowy conditions.

• Do not use your device

near an open ﬂame or

other heat source; near

areas of excessive dirt,

dust, oil, or chemicals;

or in direct sunlight.

WARNING! WARNING!

• Do not leave your

nutribullet®Portable

Blender inside your

vehicle, especially

in the summer or winter.

Prolonged exposure

to extreme temperatures

can cause the

batteries to rupture,

or explode

• Periodically inspect your

nutribullet®Portable

Blender components

for damage or wear

that may impair proper

functioning or create a

safety hazard.

• Be aware of possible

hazards when

charging, using, or

storing your nutribullet®

Portable Blender.

• Do not use this blender

for anything other its

intended use.

• Never operate your

nutribullet®Portable

Blender if the Cup

is empty.

• Do not insert any

object other than the

appropriate charger

into the USB-C port.

Do not allow dust to

accumulate inside

the port.

• Do not crush, drop, or

damage the Motor

Base. Do not operate

if the Motor Base

is damaged in any

manner. Contact

Customer Service for

assistance by visiting

bulletbrands.com.au /

bulletbrands.co.nz.

• Use only nutribullet®

attachments/

accessories speciﬁcally

designed for your

nutribullet®Portable

Blender. Always use

genuine nutribullet®

replacement parts

and accessories.

Aftermarket parts are

not made to nutribullet®

speciﬁcations and may

damage your unit or

cause serious injury.

• The use of attachments

including canning jars,

is not recommended by

the manufacturer may

cause a risk or injury

to persons.

• Do not attempt to clean

the Motor Base by

immersing in water or

other cleaning liquids.

Only gently wipe and

dry with a clean cloth.

• Only the Cup and Lid

are dishwasher safe on

Top Rack without the

heat or sanitize cycle.

NEVER PLACE THE

MOTOR BASE IN THE

DISHWASHER.

Modiﬁcation, improper

use, and failure to

follow instructions can

increase the risk

of serious personal

injury, death, or

property damage.

CHARGING YOUR

PORTABLE BLENDER

The blender’s battery

can be charged using

the USB cable provided

and a compatible

power supply unit (PSU).

Charging the battery

using an incorrect PSU

can cause damage to

the battery, including

overheating, that can

lead to ﬁres.

• Place the blender on a

ﬂat surface close to the

USB power outlet.

• Connect the motor

base to the USB power

outlet port by using the

USB cable supplied.

Ensure the cable is

fully unwound.

• Disconnect the USB

cable from the USB

port and the motor

base once the portable

blender is charged. If

using a USB PSU, switch

o the power from the

power point and unplug

the USB power adaptor

prior to disconnecting

the USB cable.

• Use only approved

power supplies rated

100V to 240V certiﬁed

for General Purpose use

to charge this device.

The PSU’s rated output

should be 5V 2A MAX.

Do not use non

approved PSU’s.

WARNING!

1110

• Do not use in wet

conditions, or immerse

the cord, plug, or Motor

Base in water or

other liquids.

• Do not operate with

a damaged cable or

appliance malfunction,

or if or if the Motor

Base has been

dropped or damaged

in any manner. Contact

Customer Service for

assistance by visiting

bulletbrands.com.au /

bulletbrands.co.nz.

• Always POWER OFF

and DISCONNECT the

nutribullet®Portable

Blender when it

is not in use, and

BEFORE assembling,

disassembling,

changing accessories,

or cleaning.

Use only the power

cord that came with

your nutribullet®

Portable Blender

to charge.

• Exposed device cables

and cords pose a

potential tripping

hazard. Arrange all

cables and cords so

that people and pets

are not likely to trip

over or accidentally

pull on them as they

move around or walk

through the area.

• When positioning your

device or Power Supply

Unit/Charger, ensure

that the cords are not

bent sharply and that

the connectors are not

pushed against a wall

or hard surface.

• Do not allow pets or

children to bite or chew

on cables and cords.

• When disconnecting

the power cord, pull

on the plug—do not

pull on the cord.

• Do not let the charging

cable touch hot

surfaces or any extreme

heat source, or become

knotted, tangled,

or frayed.

• Do not grab or carry

your device by the

charging cable or cord.

• Do not let the charging

cable hang over the

edge of a table

or counter.

LITHIUMION

BATTERIES

• Your nutribullet®

Portable Blender

contains rechargeable

Lithion-Ion batteries.

The batteries are not

replaceable and must

be recycled or disposed

of properly. Consult

your local council

for information

regarding available

recycling and/or

disposal options.

Improper disposal

may result in injury,

death, or property

damage as a result

of ﬁre, overheating,

or explosion. Lithium-

Ion batteries contain

elements that may

pose health risks to

individuals if they are

allowed to leach into the

groundwater supply.

• The motor base is

equipped with a

Lithium-Ion battery,

and it is very important

to never dispose of it

in regular household

waste. Lithium-Ion

batteries in compacting

rubbish trucks pose a

risk of ignition.

• Opening and/or

repairing or attempting

to replace the batteries

to your device can

cause electric shock,

device damage, ﬁre,

and personal injury, or

property damage.

• Do not expose the

Motor Base containing

the Lithion-Ion battery

pack to ﬁre or excessive

heat. Exposure to ﬁre

or temperatures above

130°C may damage the

batteries and cause an

explosion.

• Do not recharge

your nutribullet®

Portable Blender

near a ﬁre, heat

source, or in extremely

hot conditions.

WARNING!

1312

• Recommended

storage and ambient

charging temperature:

10°C−40°C.

• Do not use your unit

in any area with a

potentially explosive

atmosphere (e.g.,

fueling areas or fuel

service stations, below

decks on boats or other

vessels, fuel and/or

chemical transfer and

storage facilities, and

areas where ﬂammable

chemicals or particles,

such as grain dust or

metal powders have

collected in the air). In

such areas, sparks can

occur and cause an

explosion or ﬁre.

• Do not use your unit

if the Motor Base is

overheated, has an

odor, is bulging, or

changes in color/shape.

Save these

instructions!

1514

16 What’s included

17 Assembly guide

18 LED light indicator status

18 Charging

19 Settings

20 Errors

22 Using the nutribullet®

Portable Blender

24 Care and maintenance

24 Replacement parts

26 One-year limited warranty

Contents.

Thank you for purchasing the nutribullet®Portable Blender.

Before ﬁrst use.

CLEAN UNIT:

See Care and Maintenance

section on page 24.

CHARGE UNIT:

Plug the smaller end of the

included USB-C Cable into the

slot right below the Power

button (on the front of the

Motor Base) and the larger

end of the cable into the

General Purpose Power Supply.

• We recommend fully

charging the unit before

using it for the ﬁrst time.

It takes 60-90 minutes to

reach a full charge.

Please see LED Status Light

Indicator section on pages 18-20.

WARNING! Do not charge if your

unit or the USB-C port is wet to

avoid risk of ﬁre or bodily injury.

1716

Assembly guide.What’s included.

590ml cup

to-go lid

motor base 590ml cup

USB-C

charging cable

blade assembly

measurement markings

alignment marking

LED status light

power button

motor base

USB-C charging Cable

400

500

MAX

100

200

300

20oz cup

USB-C charging slot

Spout lid with handle

Product configurations may vary. To see our full list of nutribullet®accessories

please visit bulletbrands.com.au / bulletbrands.co.nz.

400

500

MAX

100

200

300

locking latch

release button

1918

LED light

indicator status.

No power

All LEDs o.

Fully charged

All LEDs light solid blue.

Wake

Press button once to wake

up your blender. When the

ring is solid blue, you are

ready to blend.

Blend mode

Blue LEDs circulate clockwise.

Press the Power button to start

a 20-second cycle.

Sleep

After 2 minutes of inactivity, your

blender will automatically go

into sleep mode. When the ring is o,

the blender is o.

Low power

LED 1 ﬂashes red.

Charging

LEDs blink to solid blue in

clockwise order.

Battery check

Press and hold the Power button

for 2 seconds to check the

battery level remaining.

Charging. Settings.

The nutribullet®Portable Blender’s

indicator has six LED light bars that

appear red or blue according to

the unit’s operational status. See

below for details.

Altri manuali per Blender Combo

Indice

Altri manuali NUTRIBULLET Elettrodomestico da cucina

NUTRIBULLET

NUTRIBULLET PRO NB-201 Manuale utente

NUTRIBULLET

NUTRIBULLET Original Guida rapida

NUTRIBULLET

NUTRIBULLET NUTRIBULLET Manuale utente

NUTRIBULLET

NUTRIBULLET ultra 1200 Manuale utente

NUTRIBULLET

NUTRIBULLET ultra Manuale utente

NUTRIBULLET

NUTRIBULLET NBP-200 Manuale utente

NUTRIBULLET

NUTRIBULLET NUTRIBULLET BABY Manuale utente

NUTRIBULLET

NUTRIBULLET magic bullet mini Manuale utente

NUTRIBULLET

NUTRIBULLET Baby Turbo Steamer Manuale utente

NUTRIBULLET

NUTRIBULLET NUTRICOOK SMART POT EKO Manuale utente

NUTRIBULLET

NUTRIBULLET GO Manuale utente

NUTRIBULLET

NUTRIBULLET JUICER PRO Manuale utente

Manuali Elettrodomestico da cucina popolari di altre marche

Tayama

Tayama TYG-35AF Manuale utente

AEG

AEG 43172V-MN Manuale utente

REBER

REBER Professional 40 Guida utente

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuale utente

Presto

Presto fountain popper Manuale utente

Westmark

Westmark 1035 2260 Manuale utente

Zanussi

Zanussi ZCG64396XA Manuale utente

HOFFEN

HOFFEN SM-9302M Manuale utente

Philips

Philips HD3133 Manuale utente

Ronco

Ronco Beef Jerky Manuale utente

Hendi

Hendi 470411 Manuale utente

Livoo

Livoo MEN386 Manuale utente

Vogue

Vogue D446 Manuale utente

croydon

croydon WR-10313-700 Manuale utente

ADE

ADE AUTOMATIC-L Manuale utente

Chefman

Chefman RJ43-SQ Series Manuale utente

Vacmaster

Vacmaster VP680 Manuale utente

Jetmaster

Jetmaster 900HG Manuale utente