Omron CS1W-MC421-V1 Manuale utente

87Motion control units

CS1W-MC421/-MC221

Motion control units

High-precision, motion controller with multi-

tasking G-language programming

• High-speed control of up to 4 axes with one unit and

up to 76 axes with one PLC (19 units x 4 axes)

(assumes that power supply unit capacity is not

exceeded).

• Winding operations easily controlled at high-speed

using traverse positioning control.

• High-speed response to commands from CPU unit

(8 ms for 2 axes, 13 ms for 4 axes).

• Encoder response of 2 Mpps possible with 4x

frequency multiplication for applications with high-

speed, high-precision servo motors.

• D interrupt code outputs to CPU unit at end of

positioning or at specified positions (D code output

time: 3.3 ms max.).

• CX-motion Windows-based support software

define user mnemonics to use in place of G codes

to simplify MC program development and analysis.

• Servo trace function from CX-motion to trace error

counter changes or motor speeds.

• Automatic loading function

MC programs and positioning data can be auto-

matically downloaded from computer memory when

required by the MC unit.

The motion controller provides closed-loop motion control via analog outputs for up to 4 axes, and supports the G language for

advanced, high-speed, high-precision position control. Multi-tasking allows you to run the axes independently for a wider range of

application.

System configuration

Function

CHARGEPOWER

SGDH-

200VVer .

CN3

CN1

CN2

CHARGEPOWER

SGDH-

200VVer .

CN3

CN1

CN2

Sigma-II series

Servo Motor

CS1 series

Motion control unit

CS1W-MC_21

Limit switches

contact sensors

Input

Sigma-II series

Servo Motor

Sigma-II series

Servo Drives

Sigma-II series

Servo Drives

Personal computer

Software: CX-One

Terminal block

Y203-EN2-02-Katalog.book Seite 87 Mittwoch, 24. Mai 2006 2:22 14

88 Motion controllers

General

CX-Motion: Windows-based support software

Motion control unit

Sigma-II series servo drive cables

I/O terminal block and cables

Computer software

Specifications

Model CS1W-MC421-V1 CS1W-MC221-V1

Classification CS1 Special I/O unit

Control method Closed loop with automatic trapezoid or S-curve acceleration/deceleration

Control output signals Analog

Internal programming language G language (program started by command sent from CPU unit’s ladder program.)

Controlled axes 4 axes max. 2 axes max.

Maximum position value –39,999,999 to 39,999,999 (for minimum setting unit of 1)

Synchronous axis control 4 axes max. 2 axes max.

Positioning Linear interpolation 4 axes max. 2 axes max.

Arc interpolation 2 axes max. in a plane

Helical interpolation 2-axis arc interpolation in a plane + feed axis ---

Traverse 2-axis traverse feeding

Infinite feed Infinite feeding of one or more axes

Interrupt feed Interrupt feeding for specified axes (positioning can be specified for when there is no interrupt.)

Task

programming

capacity

Number of tasks 4 tasks max. 2 tasks max.

Number of programs 25 programs when using 4 tasks 50 programs when using 2 tasks

Program capacity 500 blocks per task when using 4 tasks 1,000 blocks per task when using 2 tasks

Model WS02-MCTC1-EV@

Supported MC units CS1W-MC221/421, C200H-MC221, and CV500-MC221/421

Applicable computer DOS, OS: Windows 95/98 or Windows NT Version 4.0

Functions Functions required for MC unit control: creating/editing/saving/printing system parameters, positioning data, and MC programs;

monitoring MC unit operation

Ordering information

Name Model

2 axes motion control unit. CS1W-MC221-V1

4 axes motion control unit. CS1W-MC421-V1

Description Connect to Model

Axis control cable

(1 axis) Motion control units

CS1W-MC221 (1 cable needed)

CS1W-MC421 (2 cables needed)

1 m R88A-CPW001M1

2 m R88A-CPW002M1

3 m R88A-CPW003M1

5 m R88A-CPW005M1

Axes control cable

(2 axis) Motion control units

CS1W-MC221 (1 cable needed)

CS1W-MC421 (2 cables needed)

1 m R88A-CPW001M2

2 m R88A-CPW002M2

3 m R88A-CPW003M2

5 m R88A-CPW005M2

Description Connect to motion control unit Model

Terminal block CS1W-MC221 - XW2B-20J6-6

CS1W-MC421 - XW2B-40J6-7

Cable form PLC unit to

terminal block. CS1W-MC221

CS1W-MC421 1 m XW2Z-100J-F1

Specifications Model

CX-One CX-One

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. I06E-EN-02

Y203-EN2-02-Katalog.book Seite 88 Mittwoch, 24. Mai 2006 2:22 14

Questo manuale è adatto per i seguenti modelli

Altri manuali Omron Unità di controllo

Omron

Omron G9SX-AD322-T15-RT Manuale utente

Omron

Omron F3SP-B1P Manuale utente

Omron

Omron SMARTSLICE GRT1-ML2 Manuale utente

Omron

Omron CS1W-NC113 - REV 02-2008 Manuale utente

Omron

Omron C500-SNT31-V4 Manuale utente

Omron

Omron CJ1W-NC271 Guida rapida

Omron

Omron SYSMAC NY Series Manuale utente

Omron

Omron 3G3FV-PPG Series Manuale utente

Omron

Omron 3G3AX-MX2-EIP-A Manuale utente

Omron

Omron SYSMAC C500-NC113 Manuale utente

Omron

Omron CV500-MC221 Manuale utente

Omron

Omron CS1W-MC221 - 02-2008 Manuale utente

Omron

Omron CS1W-213 - REV 02-2008 Manuale utente

Omron

Omron V700-HMC71 Manuale utente

Omron

Omron CS1W-MCH71 - Manuale utente

Omron

Omron MECHATROLINK-II CS1W-NCF71 Manuale utente

Omron

Omron 3G3AX-MX2-ECT Manuale utente

Omron

Omron SYSMAC SRM1-V2 Manuale utente

Omron

Omron CS1W-LC001 Manuale utente

Omron

Omron C200H-MC221 - Manuale utente

Omron

Omron DRT1-DA02 Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

Omron

Omron GX-JC03 Manuale utente

Omron

Omron 3G3AX-DI Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente