Parker D*1VW*EE Series Manuale utente
Bulletin MSG11-5715-690/UK
Directional Control Valve
Operating instructions
Series D1VW*EE
Design series 93
II 2 G c T4 Gb
-20 °C < Ta< +60 °C
Parker Hannin
Manufacturing Germany GmbH & Co. KG
Industrial Systems Division Europe
Gutenbergstr. 38
41564 Kaarst, Germany
E-mail: [email protected].com
Copyright © 2022, Parker Hannin Corp.
2
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
Parker Hannin Corporation
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DE-
SCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This document and other information from Parker-Hannin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible for making the nal selection
of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects
of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
system options based upon data or specications provided by the user, the user is responsible for
determining that such data and specications are suitable and sucient for all applications and
reasonably foreseeable uses of the components or systems.
WARNING — USER RESPONSIBILITY
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
3Parker Hannin Corporation
0. EC declaration of conformity 4
1. Introduction 6
Technical data 6
Ordering code 7
Characteristic curves 8
Dimensions 10
Name plate 11
2. Safety instructions 11
Symbols 11
Marking, name plates 11
Work on the valve 11
3. Important information 12
Correct use 12
Common instructions 12
Liability 12
Storage 12
4. Installation 12
Scope of delivery 12
Installation 12
Electrical connection 13
Operation limits 13
Pressure uids 13
5. Operating instructions 14
Air bleeding of hydraulic system 14
Filter 14
Flushing 14
6. Maintenance 14
Replacement of a coil 14
7. Troubleshooting 16
A1 Extract from standards/directives 17
A2 User guide – solenoid 18
A3 Type-examination certicate – solenoid 22
A4 Declaration of conformity - solenoid 36
A5 Mounting instruction cable gland 37
Contents Page
4
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
Parker Hannin Corporation
0. EC declaration of conformity
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
5Parker Hannin Corporation
6
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
Parker Hannin Corporation
1. Introduction
The D1VW with explosion proof solenoids is ba-
sed on the standard D1VW series. The specic
solenoid design allows the usage in hazardous
environments.
The explosion proof class is
Ex e mb IIC T4 Gb
for use in zone 1 and 2 (according to ATEX).
Additionally the solenoids are IECEx compliant.
All explosion proof solenoids are DC design. The
valves for AC operate with integrated rectier.
Technical data
General
Design Directional spool valve
Actuation Solenoid
Size DIN NG06 / CETOP 03 / NFPA D03
Mounting interface DIN 24340 A6 / ISO 4401 / CETOP RP 121-H / NFPA D03
Mounting position unrestricted, preferably horizontal
Ambient temperature [°C] -20...+60
MTTFD[years] 150
Weight [kg] 1.8 (1 solenoid), 2.7 (2 solenoids)
Hydraulic
Max. operating pressure [bar] P, A B: 350; T: 210
Fluid Hydraulic oil according to DIN 51524
Fluid temperature [°C] -20 ... +60
Viscosity permitted [cSt] / [mm²/s] 2.8...400
Viscosity recommended [cSt] / [mm²/s] 30...80
Filtration ISO 4406 (1999); 18/16/13
Flow max. [l/min] 60 (see shift limits)
Leakage at 50 bar [ml/min] Up to 10 per ow path, depending on spool
Static / Dynamic
Step response at 95 % [ms] Energized: 32 (DC), 40 (AC)
De-energized: 40 (DC), 75 (AC)
Electrical characteristics
Duty ratio 100 % ED; CAUTION: coil temperature up to 135 °C possible
Max. switching frequency [1/h] 15000 (DC), 7200 (AC)
Protection class , Ex e mb IIC T4 Gb, IP66 (plugged and mounted correctly)
Code J N P
24 V = 230/50 Hz 110/50 Hz
±10 ±10 ±10
1.0 0.12 0.25
24 24 24
Supply voltage / ripple [V]
Tolerance supply voltage [%]
Current consumption [A]
Power consumption [W]
Solenoid connection
Box with M20x1.5 entry for cable glands. Solenoid identication as per ISO 9461.
Wiring min. [mm²] 3 x 1.5 recommended
Wiring length max. [m] 50 recommended
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
7Parker Hannin Corporation
Code Voltage
J 24 V=
P 110 V/50 Hz
N 230 V/50 Hz
Solenoid options:
Explosion proof
Ex e mb IIC +
IECEx conformity
Connection:
Explosion
proof
with cable
glands
Design
series
(not required
for ordering)
Solenoid
voltage
Further spool types, styles and combinations on request.
Directional
control
valve
Wet pin
solenoid
3-chamber
valve
Seal
Spool
position
Spool
type
Size
DIN NG06
CETOP 03
NFPA D03
3 position spools
Code Spool type
a 0 b
001
002
003
004
005
006
007
008 1)
009 1)
010
011
014
015
016
021
022
081
082
102
2 position spools
Code Spool type
a b
020
026
030
101
3 position spools
Code all 3 position spools
C
3 positions.
Spring oset in position “0“.
Operated in position “a“ or “b“.
Standard Spool type 008,
009
E
Operated in
position “a“.
Operated in
position “b“.
2 positions.
Spring oset in position “0“.
K
Operated in
position “b“.
Operated in
position “a“.
2 positions.
Spring oset in position “0“.
2 position spools
Code Spool position
B
2 positions.
Spring oset in position “b“.
Operated in position “a“.
D
2 positions.
Operated in position “a“ or “b“.
No center or oset position.
H
2 positions.
Spring oset in position “a“.
Operated in position “b“.
1) Consider specic spool position
Ordering code
Code Seal
N NBR
V FPM
1 V W E ED
8
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
Parker Hannin Corporation
Flow curve diagram
The ow curve diagram shows the ow versus pressure drop curves for all spool types. The relevant
curve number for each spool type, operating position and ow direction is given in the table below.
Spool Position “b” Position “a” Position “0”
P-A B-T P-B P-B A-T P-A P-A P-B A-T B-T P-T
001 2 2 2 2
002 1 4 1 4 1 1 5 5 2
003 3 4 3 6 7
004 2 3 2 3 7 7
005 2 2 2 2 12
006 1 4 1 4 7 7
007 3 2 2 2 3 2 7
010 3 3
011 2 2 2 2 14 14
014 3 2 2 2 3 2 7
015 3 6 3 4 7
016 2 2 2 2 12
020B 4 4 2 3
026B 4 4
030B 2 3 1 2
081 13 13 13 13
082 13 13 13 13 1) 1)
101B 11 10 10 9
102 1 4 1 4 5 5 8 8 6
P-B A-T P-A B-T P-A P-B A-T B-T P-T
008 4 5 4 5 9
009 5 5 6 7 7
Spool Position “b” Position “a”
P-A P-B A-B P-B A-T
021 2 4 4 2
P-A B-T P-A P-B A-B
022 6 2 5 2
All characteristic curves measured with HLP46 at 50 °C.
1) Only for pressure compensation, no high ow possible.
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
9Parker Hannin Corporation
Shift limits
The diagram below species the shift limits for valves with AC and DC solenoids. The specications
apply to a viscosity of 40 mm²/s and balanced ow conditions. The shift limits can be considerably
lower at unbalanced ow conditions. To avoid ow rates beyond the shift limits, a plug-in orice can
be inserted in the P-port.
Shift limit diagram with DC solenoid
Shift limit diagram with AC solenoid
Measured with HLP46 at 50 °C, 90 % Unom and warm solenoids
Measured with HLP46 at 50 °C, 95 % Unom and warm solenoids
10
D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
Parker Hannin Corporation
Dimensions
B, E -style H, K -style
C, D -style
Surface nish NBR
BK375 4x M5x30
ISO 4762-12.9
7.6 Nm
±15 %
NBR: SK-D1VW-N-91
FPM: SK-D1VW-V-91
Altri manuali per D*1VW*EE Series
1
Indice
Altri manuali Parker Unità di controllo
Parker
Parker P6 Specifiche tecniche
Parker
Parker CW Series Istruzioni operative
Parker
Parker BAM20 Manuale utente
Parker
Parker DxFB Series Manuale utente
Parker
Parker 221 Series Manuale utente
Parker
Parker HASV08R Manuale utente
Parker
Parker PA Series Istruzioni per il montaggio
Parker
Parker TPQ Series Manuale utente
Parker
Parker MI-101 Istruzioni operative e di manutenzione
Parker
Parker Autoclave Engineers 10V Series Manuale utente
Parker
Parker DFB Series Manuale utente
Parker
Parker CK-1 Guida
Parker
Parker S8VS Manuale utente
Parker
Parker D Series Manuale utente
Parker
Parker GC Series Guida utente
Parker
Parker C6 Series Istruzioni di installazione e manutenzione
Parker
Parker PSUP Series Manuale utente
Parker
Parker TPQ Series Manuale utente
Parker
Parker Sporlan B5D Series Guida utente
Parker
Parker SC Series Manuale di riferimento
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
