Philips SL111A2 Manuale utente
Features
Ballast Channel: 0 05" (1.3mm) min. thick, 1-1/2" x 1-1/2" (38mm x 38mm) brushed
and anodized extruded aluminum ballast channel. Provided with knock-cuts arc
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover
Press-fit installation. No visible hardware.
Multi-fonction Bloc (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for continious
rows and patterns
Lampholder Housing (4): 0.08" (2mm) min thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.
Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
Options and Accessories
Emergency Lighting: Electronic Bodine slim profile battery pack. The emergency
ballast senses the power failure and immediately switches to emergency made
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins. The
battery fully recharges within 24 hours. Add suffix (EM) to the catalogue numbers.
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your
Lightolier representative.
Markings
cULus Listed Suitable for damp locations.
Mounting
Direct Mount: Square canopies or invisible feed suitable for plaster ceiling, exposed
ceiling or suspended ceilings mounts.
KUBIK 1.5 SL111A2
Page 1 of 4 Bare Lamp Flush Unit
Dimensions
Lightolier www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A2.pdf
Canlyte www.canlyte.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Suspended Mount: Single stem or aircraft cable with round canopy suitable
for mounting on a standard outlet box for plaster ceiling exposed installation
or suspended ceilings mounts. Stem and cable mounts can both be used on the
same luminaire.
Patterns: Suitable for different patterns in continuous row mounting.
Electrical
Ballast: Electronic slim profile 1 lamp 28W T5 or 54W T5H0 Iinear ballast.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz
operations.
1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.
Finish
Natural brushed and anodized aluminum. All painted parts are powder coat
paint process.
Ordering guide (complete luminaire consist of unit & power feed)
Unit/Louver Cat. No. Lamp (linear) Volts Ballast Type Finish
SL111A228PIU 120/277V
SL111A228PIH 2 -28W T 5 347V Programmed Rapid Start
SL111A254PIU 120/277V
SL111A254PIH 347V Brushed and Anodized Aluminum
SL111A254MZ1 2-54W T5 HO 120V
SL111A254MZ2 277V Dimming Mark 10
SL111A254PCU 120/277V Dimming PowerSpec HDF
46-3/16"
(1173mm)
3-1/2"
(89mm)
1"
(25mm)
1-1/2"
(38mm)
Ballast Channel Channel Cover Lampholder Housing
Multi-Function Block Plug Insert
Lightolier is a Philips group brand
KUBIK 1.5 SL111A2
Page 2 of 4 Bare Lamp Flush Unit
Job Information Type:
Lightolier www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A2.pdf
Canlyte www.canlyte.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Accessories/Options
Cat. No. Finish Feed Canopy Kit
SL003JLG
SL003JWH
Textured Light Grey
White
Mounts to end or middle of the channel for power feed from
3" (76mm) or 4" (102mm) octagonal outlet box. Kit includes
one 0.05" (1.3mm) thick, 4-1/2" (114mm) grounded square steel
plate. Comes with 4 wires 18 AWG, 10 Amps max.
4-1/2"
(114 mm)
Square
Cat. No. Finish Invisible Feed Kit
SL003K Corrosion Protected Accepts conduit or cable with 3/8" (10mm) or 1/2" (13mm)
electrical connector (by others). Kit includes one 0.06" (1.5mm)
thick wall by 1/2" (13mm) dia. seamless steel stem and,
one 0.09" (2.3mm) thick by 5/8" (16mm) by 15/16" (24mm) dia.
aluminum connector. (20 Amps max.)
Cat. No. Finish Power Feed Stem Kit
SLO03M18LG
SLO03M36LG
SLO03M48LG
SLO03M72LG
SLO03M18WH
SLO03M36WH
SL003M48WH
SLO03M72WH
18" Textured Light Grey
36" Textured Light Grey
48" Textured Light Grey
72" Textured Light Grey
18" White
36" White
48" White
72" White
Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box
Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel
canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless
steel stem, available in 4 different lengths and two decorative
cylinder head screws. Complete installation of Power Feed
Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS. Comes
with 5 pre-assembled wires. 10 Amps max.
Cat. No. Finish Stem Mounting Kit (non-electrical)
SLO04M18LG
SLO04M36LG
SLO04M48LG
SLO04M72LG
SLO04M18WH
SLO04M36WH
SLO04M48WH
SLO04M72WH
18" Textured Light Grey
36" Textured Light Grey
48" Textured Light Grey
72" Textured Light Grey
18" White
36" White
48" White
72" White
Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box
Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel
canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless
steel stem, available in 4 different lengths and two decorative
cylinder head screws. Complete installation of Power Feed
Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS.
Cat. No. Finish Grid Ceiling Feed Kit
SL003LLG
SL003LWH
Textured Light Grey
White
Mounts along runner or at the intersection of runners. Kit
Includes one 2-1/8" (54mm) deep by 4" (102mm) grounded
octagonal outlet box, one 0.05" (1.3mm) thick universal
crossbar, one 4-1/2" (114mm) white plastic square, and two
t-bar clips 5/32" (4mm) thick spacer, one 0.04" (1 mm) thick
aluminum canopy and two t-bar wrap around clips. Comes
with 4 wires 18 AWG, 10 Amps max.
Lightolier is a Philips group brand
KUBIK 1.5 SL111A2
Page 3 of 4 Bare Lamp Flush Unit
Job Information Type:
Lightolier www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A2.pdf
Canlyte www.canlyte.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Cat. No. Finish Power Feed Cable Kit
SL003NLG
SL003NWH
Textured Light Grey
White
Mounts to a 3" (76mm) or 4" (102mm) octogonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1.3mm) thick grounded crossbar threaded
stud, one 0.046" (1.2mm), 96" (2438mm) long aircraft galvanized
cable with zinc plated hanger adjusting glider hardware,
two white plastic cable stay and one 18 AWG (AWM), 10 feet
(3048mm) long white cord, 10 Amps max.
Cat. No. Finish Extension Blank (4')
SL003P4 Brushed Aluminum Permits power feed between two 1.5" x 1.5" (38mm x 38mm)
brushed and anodized units in a straight run with supplied
extra wires 18 AWG, 10 Amps max, and wire connectors
to energize them. Includes one 46-3/16" (1173mm) long
extruded aluminum channel and cover, two solid aluminum
multi-function blocks as a wireway, plug inserts and wire
connectors.
46-3/16"
(1173 mm)
Cat. No. Finish Invisible Coupler
SL003Q Zinc plated Invisible coupler for joining two Kubik 1.5 units together
mechanically or/and electrically. Recommended for direct
surface mounting. Comes with 4 wires 18 AWG, 10 Amps max.
Cat. No. Finish 5 Face Connector (1-lamp unit)
SL003R Brushed Aluminum Kubik 1.5 units coupled with exclusive solid brushed and
anodized aluminum 5-face connectors and power feed can
satisfy virtually any layout requirement. The connector permits
you to create square, rectangular, continuous rows, L, T,
X configurations. Includes four threaded couples, plug insert
(3), four wires 18 AWG and wire connectors, 10 Amps max.
Kubik 1.5
1.5"
(38 mm)
Cat. No. Finish Cable Mounting Kit (non-electrical)
SL004NLG
SL004NWH
Textured Light Grey
White
Mounts to a 3" (76mm) or 4" (10mm) octagonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1 3mm) thick grounded crossbar, threaded
stud, one 0.046" (1.2mm), 96' (2438mm) long galvanized
aircraft galvanized cable with zinc plated hanger and
adjusting glider hardware. Can be used with either Cable
or Stem Power Feed Kit.
Cat. No. Finish 5 Face Connector (2-lamp unit)
SL003S Brushed Aluminum Kubik 1.5 units coupled with exclusive solid brushed and
anodized aluminum 5-face connectors and power feed can
satisfy virtually any layout requirement. The connector permits
you to create square, rectangular, continuous rows, L, T, X
configurations. Includes four threaded couples, plug insert (3),
four wires 18 AWG and wire connectors, 10 Amps max.
Lightolier is a Philips group brand
KUBIK 1.5 SL111A2
Page 4 of 4 Bare Lamp Flush Unit
Lightolier www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A2.pdf
SL003J
ZONE
DEG
ALONG 22.5 45 67.5 ACROSS
0 509 509 509 509 509
5 512 512 514 516 509
15 490 503 522 536 532
25 454 477 518 547 548
35 399 438 495 504 497
45 329 390 421 435 437
55 247 313 337 368 376
65 160 216 260 325 355
75 78 130 232 315 348
85 12 93 216 302 338
90 0 86 207 293 322
95 12 93 216 302 338
105 78 130 232 315 348
115 160 216 260 325 355
125 247 313 337 368 376
135 329 390 421 435 437
145 399 438 495 504 497
155 454 477 518 547 548
165 490 503 522 536 532
175 512 512 514 516 509
180 509 509 509 509 509
COEFFICIENTS OF UTILIZATION
ZONAL CAVITY METHOD * EFFECTIVE FLOOR CAVITY REFLECTANCE = .20
80 70 50
Wall Reflectance
70 50 30 10 70 50 30 10 50 30 10
DETERMINED IN ACCORDANCE WITH CURRENT IES PUBLISHED PROCEDURES
LUMINAIRE INPUT WATTS = 62.6
Room Cavity Ratio
ZONE LUMENS % LAMP % LUMINAIRE
0-30 430 8.29 10.50
0-40 725 13.94 17.67
0-60 1336 25.69 32.57
0-90 2051 39.45 50.00
40-90 1326 25.50 32.33
60-90 715 13.76 17.43
90-180 2051 39.45 50.00
0-180 4102 78.90 100.00
DISTRIBUTION
CANDLEPOWER CURVE
Performance
CANDLEPOWER
REPORT NO: CB902
CAT. NO: SL111A228PIU
2 x 28W T5 at 2600 Lumens
Efficiency: 78.9 %
Candela at Nadir: 509cd
0°
90°90°
180°
300
600
900
0 .85 .85 .85 .85 .78 .78 .78 .78 .66 .66 .66
1 .76 .72 .68 .65 .70 .66 .63 .60 .56 .53 .51
2 .68 .62 .57 .52 .63 .57 .52 .48 .48 .44 .41
3 .62 .54 .48 .43 .57 .50 .45 .40 .42 .38 .34
4 .57 .48 .41 .36 .52 .44 .38 .34 .37 .33 .29
5 .52 .42 .35 .30 .47 .39 .33 .28 .33 .28 .24
6 .48 .38 .31 .26 .44 .35 .29 .24 .29 .25 .21
7 .44 .34 .27 .23 .40 .31 .25 .21 .26 .22 .18
8 .40 .30 .24 .19 .37 .28 .22 .18 .24 .19 .16
9 .37 .27 .21 .17 .34 .25 .20 .16 .21 .17 .14
10 .35 .25 .19 .15 .32 .23 .17 .14 .19 .15 .12
SL003M
SL004M
SL003M
SL003M
SL003S
SL003M
SL003N
SL004M
SL004N
SL004N
SL004N
SL004N
SL004N
SL004N
SL004N
SL004N
SL004M
SL004M
SL004M
SL003M SL003N
SL003S
SL003S
SL003S
SL003S
SL003S
SL111A2 SL111A2
SL111A2
SL111A2
SL111A2 SL111A2
SL111A2
SL111A2
SL111A2
SL111A2
SL111A2
SL111A2
SL111A2
SL111A2
SL111A2SL111A2 SL111A2SL003R SL003R SL003RSL003P4
SL004N SL004N SL004N SL003N
Patterns
Job Information Type:
Canlyte www.canlyte.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Lightolier is a Philips group brand
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Philips Apparecchio di illuminazione
Philips
Philips 37951-17-16 Manuale utente
Philips
Philips Lytecaster 1050 Series Manuale utente
Philips
Philips 69141-96-PH Manuale utente
Philips
Philips Lightoiler Alter Concept SR T5 Manuale utente
Philips
Philips LVL Series Manuale utente
Philips
Philips Calculite 8087 Manuale utente
Philips
Philips LWL2 Series Manuale utente
Philips
Philips 69112-32-PH Manuale utente
Philips
Philips 6910860PH Manuale
Philips
Philips ProSpec 26000 Manuale utente
Philips
Philips 32614 Series Manuale utente
Philips
Philips Vari-lite VL3500 Wash FX Luminaries Manuale utente
Philips
Philips iColor Cove QLX Manuale utente
Philips
Philips Lytecaster 409X Manuale utente
Philips
Philips Lytecaster 1102P1 Manuale utente
Philips
Philips 40747-48-16 Manuale utente
Philips
Philips Brisa FC21LEC Manuale utente
Philips
Philips 6914153PH Manuale
Philips
Philips iColor Accent Powercore Manuale utente
Philips
Philips Lytecaster 313X Manuale utente
Manuali Apparecchio di illuminazione popolari di altre marche
Emos
Emos CLASSIC ZY1431T Manuale utente
Westinghouse
Westinghouse Outdoor Lighting Fixture Manuale utente
Hedler
Hedler C 12 silent Manuale utente
Blizzard Lighting
Blizzard Lighting Puck: CSI Manuale utente
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Manuale utente
Lightmaxx
Lightmaxx Shaft 5R Manuale utente
Stageline
Stageline ODW-2410RGBW Manuale utente
Light Sky
Light Sky Tornado Series Manuale utente
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente
Lightolier
Lightolier Lytespan 83ED17S Manuale utente
Lightolier
Lightolier Calculite CS8226 Manuale utente
ArtFox
ArtFox Beam 15R extreme Manuale utente