Pilz PNOZ mmc1p Manuale utente

PNOZ mmc1p

Operating Manual 1002102-EN-02

}Configurable compact control systems PNOZmulti Mini

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PNOZ mmc1p

1002102-EN-02 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.2 Using the documentation 5

1.3 Definition of symbols 5

Section 2 Overview 7

2.1 Scope of supply 7

2.2 Unit features 7

2.3 Front view 7

Section 3 Safety 9

3.1 Intended use 9

3.2 System requirements 9

3.3 Safety regulations 10

3.3.1 Use of qualified personnel 10

3.3.2 Warranty and liability 10

3.3.3 Disposal 10

3.3.4 For your safety 10

Section 4 Function description 11

4.1 Unit properties 11

4.2 Block diagram 11

Section 5 Installation 12

5.1 General installation guidelines 12

5.2 Dimensions 12

5.3 Connect the base unit and expansion modules 13

Section 6 Commissioning 14

6.1 General wiring guidelines 14

6.2 Preparing for operation 14

6.2.1 Download modified project to the PNOZmulti safety system 14

6.3 Ethernet interfaces 15

6.3.1 RJ45 interfaces ("Ethernet") 15

6.3.2 Requirements of the connection cable and connector 15

6.3.3 Interface configuration 15

6.3.4 RJ45 connection cable 16

6.3.5 Process data exchange 17

Section 7 Operation 18

7.1 Messages 18

7.1.1 Display elements for device diagnostics 18

7.2 Reset Ethernet connection settings 19

Contents

Operating Manual PNOZ mmc1p

1002102-EN-02 4

Section 8 Technical details 20

Section 9 Order reference 22

9.1 Product 22

9.2 Accessories 22

Introduction

Operating Manual PNOZ mmc1p

1002102-EN-02 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product PNOZ mmc1p. It is valid until new documenta-

tion is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.2 Using the documentation

This document is intended for instruction. Only install and commission the product if you

have read and understood this document. The document should be retained for future ref-

erence.

1.3 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

Introduction

Operating Manual PNOZ mmc1p

1002102-EN-02 6

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PNOZ mmc1p

1002102-EN-02 7

2 Overview

2.1 Scope of supply

}Expansion module PNOZ mmc1p

}Jumper

2.2 Unit features

Using the product PNOZ mmc1p:

Communication module for connection to a base unit from the configurable control systems

PNOZmultiMini.

The product has the following features:

}Can be configured in the PNOZmulti Configurator

}2 Ethernet interfaces

}Status indicators for supply voltage, communication and errors

}Max. 1 communication module can be connected to the left of the base unit PNOZmulti

Mini

2.3 Front view

0002-4840

Power

Link1

Traffic1

Link2

Traffic2

Fault

Legend:

}Link1, Link2:

Ethernet interfaces

Overview

Operating Manual PNOZ mmc1p

1002102-EN-02 8

}LEDs:

– Power

– Link1

– Traffic1

– Link2

– Traffic2

– Fault

Safety

Operating Manual PNOZ mmc1p

1002102-EN-02 9

3 Safety

3.1 Intended use

The expansion module PNOZ mmc1p is used for communication of the configurable control

systems PNOZmulti Mini via Ethernet.

The expansion module may only be connected to a base unit PNOZmulti Mini (for details of

the base units PNOZmulti Mini

that can be connected, refer to the document "PNOZmulti System Expansion").

The configurable small control systems PNOZmulti are used for the safety-related interrup-

tion of safety circuits and are designed for use in:

}E-STOP equipment

}Safety circuits in accordance with VDE0113 Part 1 and EN60204-1

The expansion module may not be used for safety-related functions.

The following is deemed improper use in particular:

}Any component, technical or electrical modification to the product

}Use of the product outside the areas described in this manual

}Use of the product outside the technical details (see Technical details [ 20]).

NOTICE

EMC-compliant electrical installation

The product is designed for use in an industrial environment. The product

may cause interference if installed in other environments. If installed in other

environments, measures should be taken to comply with the applicable

standards and directives for the respective installation site with regard to in-

terference.

3.2 System requirements

Please refer to the "Product Modifications PNOZmulti" document in the "Version overview"

section for details of which versions of the base unit and PNOZmulti Configurator can be

used for this product.

Safety

Operating Manual PNOZ mmc1p

1002102-EN-02 10

3.3 Safety regulations

3.3.1 Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,

maintained and decommissioned by competent persons.

A competent person is someone who, because of their training, experience and current pro-

fessional activity, has the specialist knowledge required to test, assess and operate the

work equipment, devices, systems, plant and machinery in accordance with the general

standards and guidelines for safety technology.

It is the company’s responsibility only to employ personnel who:

}Are familiar with the basic regulations concerning health and safety / accident preven-

tion

}Have read and understood the information provided in this description under "Safety"

}And have a good knowledge of the generic and specialist standards applicable to the

specific application.

3.3.2 Warranty and liability

All claims to warranty and liability will be rendered invalid if

}The product was used contrary to the purpose for which it is intended

}Damage can be attributed to not having followed the guidelines in the manual

}Operating personnel are not suitably qualified

}Any type of modification has been made (e.g. exchanging components on the PCB

boards, soldering work etc.).

3.3.3 Disposal

}When decommissioning, please comply with local regulations regarding the disposal of

electronic devices (e.g. Electrical and Electronic Equipment Act).

3.3.4 For your safety

The unit meets all the necessary conditions for safe operation. However, you should always

ensure that the following safety requirements are met:

}This operating manual only describes the basic functions of the unit. The expanded

functions are described in the PNOZmulti Configurator's online help. Only use these

functions once you have read and understood the documentations.

}Do not open the housing or make any unauthorised modifications.

}Please make sure you shut down the supply voltage when performing maintenance

work (e.g. exchanging contactors).

Indice

Altri manuali Pilz Unità di controllo

Pilz

Pilz PNOZ mc1p Manuale utente

Pilz

Pilz PNOZ mc2.1p Manuale utente

Pilz

Pilz PSS u2 ES 8DI Manuale utente

Pilz

Pilz PNOZ ma1p Manuale utente

Pilz

Pilz PNOZ mc7p Manuale utente

Pilz

Pilz mc1p coated Manuale utente

Pilz

Pilz PNOZ ms1p Manuale utente

Pilz

Pilz PIT gb Series Manuale utente

Pilz

Pilz PSSu E F 4DO 0.5 Manuale utente

Pilz

Pilz PSSu K F FAU B Manuale utente

Pilz

Pilz PIT es Set10u-5c PCB Manuale utente

Pilz

Pilz PIT gb LLLE Manuale utente

Pilz

Pilz PNOZmulti PNOZ mmc3p Manuale utente

Pilz

Pilz PSS Series Manuale utente

Pilz

Pilz PNOZ m EF Multi Link Manuale utente

Pilz

Pilz PNOZ m EF 4DI4DOR Manuale utente

Pilz

Pilz PNOZ m EF 8DI4DO Manuale utente

Pilz

Pilz PNOZ mi2p Manuale utente

Pilz

Pilz PNOZ m ES ETH Manuale utente

Pilz

Pilz PNOZ mc3p Manuale utente

Pilz

Pilz PNOZ m ES ETH Manuale utente

Pilz

Pilz PSSu E F 4DI Manuale utente

Pilz

Pilz PNOZ m ES Powerlink Manuale utente

Pilz

Pilz PRBT 6 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente