Planet WAP-1000 WireFree Manuale utente
WAP-1000
WireFree
USER'S MANUAL
WireFree Wireless LAN
2
FCC Information
The Federal Communication Commission Radio Frequency Interference Statement includes the
following paragraph:
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
♦Reorient or relocate the receiving antenna.
♦Increase the separation between the equipment and receiver.
♦Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
♦Consult the dealer or an experienced radio / TV technician for help.
The user should not modify or change this equipment without written approval from company name.
Modification could void authority to use this equipment.
For the safety reason, people should not work in a situation which RF Exposure limits be exceeded.
To prevent the situation happening, people who work with the antenna should be aware of the
following rules:
1. Install the antenna in a location where a distance of 6.5 cm from the antenna may be maintained.
2. While installing the antenna in the location, please do not turn on the power of wireless card.
3. While the device is working, please do not contact the antenna.
WAP-1000 User’ s Guide
Copyright
Copyright © 1999 Planet Technology Corp., all rights reserved. No part of this publication may
be reproduced, adapted, stored in a retrieval system, translated into any language, or
transmitted in any form or by any means without the written permission of Planet Technology
Corp.
Trademarks
Planet is trademark of Planet Technology Corp., all other trademarks throughout this manual
are the property of their respective companies.
Contents subject to revision without prior notice.
Limited Warranty
In no event will Planet be liable for any damage, including loss of data or profits, cost of cover,
or other incidental, consequential or indirect damages arising from the installation, maintenance,
use, performance, failure or interruption of Planet’s products, whatever caused and on any
theory of liability. This limitation will apply even if Planet has been advised of the
possibility of such damage.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
About This Manual
WireFree WAP-1000 User’s Guide is first published by Planet Technology Corp. in 1999.
This Revision is for WireFree WAP-1000 Version 2.0, issued in August , 1999.The purpose of
this manual is for the setup of the product WireFree WAP-1000.
Revision
WireFree WAP-1000 User’s Guide
Part No.EMWAP1KV2
WireFree Wireless LAN
4
Contents
CHAPTER 1 ABOUT WAP-1000 ACCESS POINT................................................................................................1
1-1 FEATURES AND BENEFITS ...................................................................................................................................1
1-2 APPLICATIONS ...................................................................................................................................................1
1-3 PRODUCT KIT ....................................................................................................................................................2
CHAPTER 2 HARDWARE INSTALLATION ........................................................................................................3
2-1 SYSTEM REQUIREMENTS.....................................................................................................................................3
2-2 MECHANICAL DESCRIPTION ................................................................................................................................3
2-3 WAP-1000 HARDWARE INSTALLATION...............................................................................................................3
CHAPTER 3 USING THE START-UP CONFIGURATION ..................................................................................5
3-1 TERMINAL MODE...............................................................................................................................................5
3-2 TELNET MODE...................................................................................................................................................9
3-3 WEB MANAGEMENT.........................................................................................................................................10
CHAPTER 4 TROUBLESHOOTING....................................................................................................................14
APPENDIX A NETWORK CONFIGURATION AND PLANNING ................................................................15
A-1 NETWORK TOPOLOGY .....................................................................................................................................15
A-2 ROAMING........................................................................................................................................................18
APPENDIX B SPECIFICATIONS.....................................................................................................................22
APPENDIX C GLOSSARY.....................................................................................................................................23
WAP-1000 User’ s Guide
1
Chapter 1 About WAP-1000 Access Point
WireFree WAP-1000 is an Access Point that performs as a transparent Media Access Control (MAC)
bridge between wired Local Area Networks, and one or more WireFree wireless networks.
Placed anywhere along an Ethernet LAN, WAP-1000 allows wireless stations in their coverage area
to access transparently to the corporate network. WireFree WAP-1000, together with WireFree
network adapter cards, enables you to build a variety of network configurations.
1-1 Features and Benefits
lProtocol-independent networking functionality
lAccess for mobile WireFree WL-2400/WL-3501/WAP-900 users into the legacy wired
Ethernet LAN.
lWeb Management support
lRoaming capability
lSeamless connectivity to wired Ethernet and PC network LAN’s augments existing
networks quickly and easily.
lSupports point-to-point and point-to-multipoint access.
lSupports up to 2 Mbps data rate: T-1 line alternative/replacement that dramatically cuts
costs.
lSupports a wide range of LAN NOS (Win95/98, NT, Netware client, DOS)
lOmnidirectional antenna included.
lWireless connection without the hassles and cost of cabling.
lGreater flexibility to locate or move networked PC’s
1-2 Applications
WireFree products offer a fast, reliable, cost-effective solution for wireless client access to the
network in applications like these:
1. Remote access to corporate network information
E-mail, file transfer and terminal emulation.
2. Difficult-to-wireenvironments
Historical or old buildings, asbestos installations, and open area where wiring is difficult to
employ.
3. Frequently changing environments
Retailers, manufacturers and banks who frequently rearrange the workplace and change
WireFree Wireless LAN
2
location.
4. Temporary LANs for special projects or peak time
Trade shows, exhibitions and construction sites need temporary setup for a short time period.
Retailers, airline and shipping companies need additional workstations for a peak period.
Auditors require workgroups at customer sites.
5. Access to database for mobile workers
Doctors, nurses, retailers, white-collar workers need access to database while being mobile in
the hospital, retail store or office campus.
6. SOHO (Small Office and Home Office) users
SOHO users need easy and quick installation of a small computer network.
7. Inter-building connection
The wireless building-to-building network installs quickly, requires no monthly lease fees, and
provides the flexibility to reconfigure easily.
1-3 Product Kit
Each WAP-1000 package comes with:
uWAP-1000 Box……………………………………………… x 1
uAntenna (dipole, omni-directional)…………………………….. x 1
uWAP-1000 User’s Manual CD-ROM……………………….x 1
uPower Adapter………………………………………………….x 1
uA/C Power Cord……………………………………………….. x 1
uRS-232C Configuration Cable …………………………... x 1
If any of the listed items is not included or found damaged, please contact your local dealer.
WAP-1000 User’ s Guide
3
Chapter 2Hardware Installation
2-1 System Requirements
Installation of WAP-1000 requires:
1. An A/C power outlet (100~240V, 50~60Hz) which supplies the power for WAP-1000 Access
Point.
2. A 10Base-T (UTP) Ethernet cable drop (RJ-45 connectors).
Note: (Only if you want to re-configure the WAP-1000 Access Point instead of using factory
installed default configuration…) A DOS-based PC with TCP/IP connection to the network
or with an available RS-232C port to run the configuration program.
2-2 Mechanical Description
Front Panel:
Side Panel:
Fig2-1 Mechanical Instruction of WAP-1000 Access Point
2-3 WAP-1000 Hardware Installation
Please follow these procedures for setting up hardware:
1. Site Selection
Choose a proper placement for your WAP-1000 Access Point. The Site Survey and Access Point
Browser utility will help you with site selection.
In general, the best location to place your WAP-1000 Access Point in your site is the center of
RS-232C Configuration Port
Antenna Connector
Power Switch
DC 5V Power Socket
RJ-45 Connector
: Power
: (Wired) Ethernet Tx/Rx
: Wireless LAN Tx/Rx
WireFree Wireless LAN
4
your wireless coverage, with line of sight to all your mobile stations.
2. Attach the Antenna
Connect the antenna on the Antenna connector of your WAP-1000 Access Point. Proper antenna
placement shall improve the WAP-1000 performance. Try to place the antenna in the position that
can best cover its BBS. Normally, the higher you place the antenna, the better the performance
will be.
3. Connect the Ethernet Cable
WAP-1000 can be connected to the 10Base-T Ethernet network. Connect your UTP Ethernet
cable to the RJ-45 connector of WAP-1000 Access Point.
4. Connect the Power Cable
Connect the power adapter cable to the DC5V Power Socket of WAP-1000 and turn the
power on. USE ONLY the power adapter, which supplied with WireFree WAP-1000. Otherwise,
the product may be damaged.
WAP-1000 User’ s Guide
5
Chapter 3 Using the Start-up Configuration
The WAP-1000 Access Point can be connected to your configuration station either via RS-
232C direct connection by using the RS-232C Configuration Cable (supplied) or a null-modem cable
(See Fig3.1) or anywhere through TCP/IP connection.
Fig3.1 Connecting RS-232C Configuration Cable
3-1 Terminal Mode
ØWAP-1000 can be configured via either RS-232 or RJ-45.
ØConfigure the WAP-1000 Access Point via the RS-232 cable for the first time.
Procedures are listed as follows:
a. Connect WAP-1000 and your PC with the RS-232 cable.
b. Turn on the power of WAP-1000 and your PC.
c. Run Terminal Program in Windows 95/98, NT or any operation system that installs
Terminal Program. The parameter setting should be as follows:
Please attach one of
the 9-pin and 25-pin
connector to your
COM port.
WireFree Wireless LAN
6
Baud Rate = 9600 BPS
d. When the setting is successfully completed, a window shows up.
i.Type “info”and the associated parameters shows up such as MAC address and Domain
(FCC North America, IC Canada,ETSI Europe, MKK Japan, etc)
Indice
Altri manuali Planet Punto di accesso wireless
Planet
Planet 802.11n Wireless Access Point WNAP-1120 Manuale utente
Planet
Planet WAP-7500 Manuale utente
Planet
Planet WAP-1963 Manuale utente
Planet
Planet WNAP-3000PE Manuale utente
Planet
Planet WAP-4060PE Manuale utente
Planet
Planet WDAP-C7200AC Manuale utente
Planet
Planet WNAP-7350 Manuale utente
Planet
Planet WAP-6200 Manuale utente
Planet
Planet WDAP-C7200AC Manuale utente
Planet
Planet WDAP-1750AC Manuale utente
Planet
Planet WDAP-C7200E Manuale utente
Planet
Planet WNAP-3000PE Manuale utente
Planet
Planet WNAP-7350 Manuale utente
Planet
Planet WDAP-1750AC Manuale utente
Planet
Planet WAP-4030A Manuale utente
Planet
Planet WAP-1960 Manuale utente
Planet
Planet WBS-202N Manuale utente
Planet
Planet WDAP-C1800AX Manuale utente
Planet
Planet WDAP-W7200AC Manuale utente
Planet
Planet WDAP-C3000AX Manuale utente
